journal article·2024-12Open access

On the effect of energy input on microstructure evolution and mechanical properties of laser beam powder bed fusion processed Ti-27Nb-6Ta biomedical alloy

C. Lauhoff, J. Johannsen, A. Bolender, A. Engelhardt, M. Stenzel, M. Weinmann, T. Niendorf

Abstract

Additive manufacturing of pre-alloyed Ti-27Nb-6Ta powder by laser beam powder bed fusion (PBF-LB/M) employing a wide range of processing parameters is reported. An in-depth microstructure analysis along the whole process chain from powder feedstock material to additively manufactured bulk structures was conducted employing scanning electron microscopy (SEM) as well as X-ray and high-energy synchrotron diffraction. It is shown that near-fully dense parts (≥ 99.96%) with β+α’’ dual-phase microstructure and very homogenous element distribution are obtained in a large process window. In particular, a considerable influence of the energy input during PBF-LB/M on the solidification microstructure, i.e. phase composition and texture, is found. With increasing energy per unit area (E A ) values both an increase in the volume fraction of the bcc β-phase and more pronounced texture components are seen. Furthermore, the mechanical behavior was evaluated under monotonic tensile loading. The PBF-LB/M processed Ti-27Nb-6Ta structures feature good mechanical properties with ultimate tensile strength (UTS) and strain to failure values of up to 768 MPa and 33.8 %, respectively. Due to the strong impact of the energy input during additive manufacturing on the microstructure evolution, however, a significant inverse strength-ductility behavior is observed. While UTS clearly decreases with increasing E A values, strain to failure increases at the same time. The underlying relationships between processing (energy input), microstructure and mechanical properties are explored and rationalized. • Additive manufacturing (AM) of pre-alloyed Ti-Nb-Ta powder by laser beam powder bed fusion (PBF-LB/M). • Chemically homogenous AM structures with near full density in a wide range of processing parameters. • Energy input during processing allows to tailor microstructure, phase constitution and mechanical properties of as-built parts. • The findings presented establish pathways for direct microstructure design in envisaged implant applications.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · High Entropy Alloys Studies · Titanium Alloys Microstructure and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (99)

Show source-provided references
1. Review on titanium and titanium based alloys as biomaterials for orthopaedic applications, Materials science & engineering10.1016/j.msec.2019.04.064 ↗
2. Titanium alloys in total joint replacement--a materials science perspective10.1016/S0142-9612(97)00146-4 ↗
3. Titanium alloys for biomedical applications10.1016/j.msec.2005.08.032 ↗
4. Recent development in beta titanium alloys for biomedical applications10.3390/met10091139 ↗
5. Lütjering · 2007
6. The elastic moduli of human subchondral, trabecular, and cortical bone tissue and the size-dependency of cortical bone modulus10.1016/0021-9290(90)90003-L ↗
7. Design and development of metallic biomaterials with biological and mechanical biocompatibility10.1002/jbm.a.36667 ↗
8. Titanium-based biomaterials for preventing stress shielding between implant devices and bone10.1155/2011/836587 ↗
9. Advances in metals and alloys for joint replacement10.1016/j.pmatsci.2017.04.002 ↗
10. Cellular responses of osteoblast-like cells to 17 elemental metals10.1002/jbm.a.35895 ↗
11. Aluminium neurotoxicity: neurobehavioural and oxidative aspects10.1007/s00204-009-0455-6 ↗
12. A review on alloy design, biological response, and strengthening of β-titanium alloys as biomaterials, Materials science & engineering
13. Design and mechanical properties of new β type titanium alloys for implant materials10.1016/S0921-5093(97)00808-3 ↗
14. A review of metastable beta titanium alloys10.3390/met8070506 ↗
15. A novel combinatorial approach to the development of beta titanium alloys for orthopaedic implants10.1016/j.msec.2004.12.010 ↗
16. Development of new metallic alloys for biomedical applications10.1016/j.actbio.2012.06.037 ↗
17. Research progress of titanium-based high entropy alloy: methods, properties, and applications10.3389/fbioe.2020.603522 ↗
18. Bio-high entropy alloys: progress, challenges, and opportunities
19. Peculiar elastic behavior of Ti–Nb–Ta–Zr single crystals10.1016/j.actamat.2008.02.017 ↗
20. Markus Weinmann, Holger Brumm, Christoph Schnitter, Melanie Stenzel, Metal Powder for 3d-printing(US20220023941A1).
21. Mechanical properties of a newly additive manufactured implant material based on Ti-42Nb10.3390/ma11010124 ↗
22. Bone response to a novel Ti-Ta-Nb-Zr alloy10.1016/j.actbio.2015.03.038 ↗
23. Highly anisotropic steel processed by selective laser melting10.1007/s11663-013-9875-z ↗
24. Corrosion resistance and biocompatibility of Ti–Ta alloys for biomedical applications10.1016/j.msea.2005.03.032 ↗
25. Ti–25Ta alloy with the best mechanical compatibility in Ti–Ta alloys for biomedical applications10.1016/j.msec.2008.09.012 ↗
26. Development of bio-compatible refractory Ti/Nb(/Ta) alloys for application in patient-specific orthopaedic implants10.1016/j.ijrmhm.2018.03.018 ↗
27. Preparation, structural, microstructural, mechanical, and cytotoxic characterization of Ti-15Nb alloy for biomedical applications10.1111/aor.13624 ↗
28. Oxidation treatments of beta-type Ti-40Nb for biomedical use10.1016/j.surfcoat.2016.05.036 ↗
29. Effects of Ta content on Young's modulus and tensile properties of binary Ti–Ta alloys for biomedical applications10.1016/j.msea.2003.12.011 ↗
30. Beta Ti alloys with low young's modulus10.2320/matertrans.45.2776 ↗
31. Biocompatibility of new Ti-Nb-Ta base alloys, Materials science & engineering10.1016/j.msec.2015.12.071 ↗
32. Advanced Ti–Nb–Ta alloys for bone implants with improved functionality
33. Laser beam powder bed fusion of novel biomedical titanium/niobium/tantalum alloys: powder synthesis, microstructure evolution and mechanical properties10.1016/j.matdes.2023.112265 ↗
34. Investigation of the martensitic transformation and the damping behavior of a superelastic Ti–Ta–Nb alloy10.1016/j.actamat.2012.09.065 ↗
35. Synthesis and characterisation of a new superelastic Ti-25Ta-25Nb biomedical alloy10.1016/j.jmbbm.2010.06.007 ↗
36. Biocompatibility of advanced manufactured titanium implants-A review10.3390/ma7128168 ↗
37. Additive manufacturing of biomaterials − the evolution of rapid prototyping10.1002/adem.201800511 ↗
38. Additive manufacturing of metallic components – process, structure and properties10.1016/j.pmatsci.2017.10.001 ↗
39. Cranial reconstruction: 3D biomodel and custom-built implant created using additive manufacturing10.1016/j.jcms.2014.07.006 ↗
40. The use of three-dimensional printing technology in orthopaedic surgery10.1177/2309499016684077 ↗
41. The design of additively manufactured lattices to increase the functionality of medical implants, Materials science & engineering10.1016/j.msec.2018.10.052 ↗
42. Glicksman · 2011
43. Fine-structured aluminium products with controllable texture by selective laser melting of pre-alloyed AlSi10Mg powder10.1016/j.actamat.2012.11.052 ↗
44. Grain structure control during metal 3D printing by high-intensity ultrasound10.1038/s41467-019-13874-z ↗
45. Additive manufacturing of alloys with programmable microstructure and properties10.1038/s41467-023-42326-y ↗
46. Damage tolerant design by microstructural gradation – influence of processing parameters and build orientation on crack growth within additively processed 316L10.1016/j.msea.2019.138186 ↗
47. Functionally graded alloys obtained by additive manufacturing10.1002/adem.201300579 ↗
48. Labelling additively manufactured parts by microstructural gradation – advanced copy-proof design10.1108/RPJ-12-2014-0183 ↗
49. Biocompatible low Young's modulus achieved by strong crystallographic elastic anisotropy in Ti-15Mo-5Zr-3Al alloy single crystal10.1016/j.jmbbm.2012.05.005 ↗
50. Beta titanium single crystal with bone-like elastic modulus and large crystallographic elastic anisotropy10.1016/j.jallcom.2018.12.236 ↗
51. Texture analysis with MTEX – free and open source software toolbox10.4028/www.scientific.net/SSP.160.63 ↗
52. PyFAI: a Python library for high performance azimuthal integration on GPU10.1017/S0885715613000924 ↗
53. PyFAI, a versatile library for azimuthal regrouping
54. Beamline P02.1 at PETRA III for high-resolution and high-energy powder diffraction10.1107/S1600577515002222 ↗
55. Electron beam powder bed fusion of Ti-30Ta high-temperature shape memory alloy: microstructure and phase transformation behaviour10.1080/17452759.2024.2358107 ↗
56. Crystal structure, transformation strain, and superelastic property of Ti–Nb–Zr and Ti–Nb–Ta alloys10.1007/s40830-015-0022-3 ↗
57. Influence of texture on powder diffraction10.1155/TSM.29.1 ↗
58. 1999 · 169
59. The Rietveld method: a retrospection10.1524/zkri.2010.1356 ↗
60. Impact of process flow conditions on particle morphology in metal powder production via gas atomization10.1016/j.apt.2019.10.022 ↗
61. The evolution of structural and chemical heterogeneity during rapid solidification at gas atomization10.1088/1757-899X/192/1/012009 ↗
62. A pore morphological study of gas-atomized Ti-6Al-4V powders by scanning electron microscopy and synchrotron X-ray computed tomography10.1016/j.powtec.2018.02.053 ↗
63. Microstructural porosity in additive manufacturing: the formation and detection of pores in metal parts fabricated by powder bed fusion10.1002/amp2.10021 ↗
64. Defects in metal additive manufacturing processes10.1007/s11665-021-05919-6 ↗
65. Laser powder bed fusion of titanium-tantalum alloys: compositions and designs for biomedical applications10.1016/j.jmbbm.2020.103775 ↗
66. Microstructure of a Ti–50 wt% Ta alloy produced via laser powder bed fusion10.1007/s40195-020-01052-w ↗
67. Influence of different grained powders and pellets made of Niobium and Ti-42Nb on human cell viability, Materials science & engineering10.1016/j.msec.2016.12.098 ↗
68. Comparison of microstructure and mechanical behavior of Ti-35Nb manufactured by laser powder bed fusion from elemental powder mixture and prealloyed powder10.1016/j.jmst.2021.07.021 ↗
69. Microstructure of an additively manufactured Ti-Ta-Al alloy using novel pre-alloyed powder feedstock material10.1016/j.addlet.2023.100144 ↗
70. Chemical heterogeneities in tungsten containing TiAl alloys processed by powder metallurgy10.1016/j.mtla.2021.101147 ↗
71. Gas atomization of Al-steels
72. Ingot metallurgy and microstructural characterization of Ti–Ta alloys10.3139/146.111010 ↗
73. Alloying titanium and tantalum by cold crucible levitation melting (CCLM) furnace10.1016/S0921-5093(99)00668-1 ↗
74. Resolving the porosity-unmelted inclusion dilemma during in-situ alloying of Ti34Nb via laser powder bed fusion10.1016/j.actamat.2020.116522 ↗
75. In situ elaboration of a binary Ti-26Nb alloy by selective laser melting of elemental titanium and niobium mixed powders, Materials science & engineering10.1016/j.msec.2016.02.033 ↗
76. Remelt processing and microstructure of selective laser melted Ti25Ta10.1016/j.jallcom.2019.153082 ↗
77. Influence of a remelt scan strategy on the microstructure and fatigue behaviour of additively manufactured biomedical Ti65Ta efficiently assessed using small scale specimens10.1016/j.ijfatigue.2022.106944 ↗
78. Thermomechanical processing of beta titanium alloys—an overview10.1016/S0921-5093(97)00783-1 ↗
79. Redefining the β-phase stability in Ti-Nb-Zr alloys for alloy design and microstructural prediction
80. The Additive Manufacturing (AM) of titanium alloys10.1016/j.mprp.2016.12.062 ↗
81. Formation and control of martensite in Ti-6Al-4V alloy produced by selective laser melting10.1016/j.matdes.2016.06.117 ↗
82. Microstructural evolution and mechanical behavior of TA15 titanium alloy fabricated by selective laser melting: influence of solution treatment and aging10.3390/met13091514 ↗
83. A study of the microstructural evolution during selective laser melting of Ti–6Al–4V10.1016/j.actamat.2010.02.004 ↗
84. Microstructural control of additively manufactured metallic materials10.1146/annurev-matsci-070115-031816 ↗
85. Solidification microstructure-processing maps: theory and application10.1002/1527-2648(200107)3:7<443::AID-ADEM443>3.0.CO;2-W ↗
86. Parametric analysis of thermal behavior during selective laser melting additive manufacturing of aluminum alloy powder10.1016/j.matdes.2014.07.006 ↗
87. Additive manufacturing of Ti6Al4V alloy: a review10.1016/j.matdes.2018.107552 ↗
88. Additive manufacturing of nickel-based superalloys: a state-of-the-art review on process-structure-defect-property relationship10.1016/j.pmatsci.2023.101108 ↗
89. A review of laser powder bed fusion additive manufacturing of aluminium alloys: microstructure and properties
90. Grain morphology evolution behavior of titanium alloy components during laser melting deposition additive manufacturing10.1016/j.jallcom.2015.01.256 ↗
91. Role of changes in heat input on additively manufactured Ti–6Al–4V fabricated by directed energy deposition10.1016/j.msea.2021.141541 ↗
92. Design of novel materials for additive manufacturing - isotropic microstructure and high defect tolerance10.1038/s41598-018-19376-0 ↗
93. The Ta−Ti (Tantalum-Titanium) system10.1007/BF02873705 ↗
94. The Nb−Ti (Niobium-Titanium) system10.1007/BF02873704 ↗
95. A kinetic study on the evolution of martensitic transformation behavior and microstructures in Ti–Ta high-temperature shape-memory alloys during aging10.1007/s40830-018-00200-7 ↗
96. Discovery of ω -free high-temperature Ti-Ta- X shape memory alloys from first-principles calculations
97. New insights into nickel-free superelastic titanium alloys for biomedical applications10.1016/j.cossms.2019.100783 ↗
98. Omega phase transformation – morphologies and mechanisms
99. The effect of omega phase on the mechanical properties of titanium alloys10.1007/BF02913423 ↗