journal article·2020-10

Deformation mode dependence of an exothermic chemical reaction in Ti/Si multilayered nanofilms

Hiroyuki Hirakata, Takahiro Shiraishi, Takahiro Shimada

Publisher page

Abstract

Abstract Controlling chemical reactions by mechanical loading is an interesting but challenging task. In our research, we investigated the dependence of deformation modes on an exothermic chemical reaction in Ti/Si multilayered nanofilms. Compression, shear, and compression-shear mixed modes in the stacking direction were evaluated as basic deformation modes that can cause chemical reactions. We developed in-situ TEM methods for applying shear and compression-shear loads for multilayer nanofilms. In both the shear and compression-shear tests, localized shear deformation across the nanofilm interface occurred and new interfaces were generated in a very localized region. TEM nanobeam electron diffraction revealed that a crystal structure of Ti5Si4 and/or TiSi was generated in the local shear band. The formation of a new interface at the localized shear band was the basic mechanism for the chemical reaction. This was very different from the existing mechanism of a chemical reaction induced by uniform compressive deformation, where the chemical reaction occurred over a wide area. These results make it possible to control and generate a desired morphological chemical reaction on a localized nanoscale by varying the mechanical loading mode.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Nanowire Synthesis and Applications · Microstructure and mechanical properties · Semiconductor materials and interfaces

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. Mechanical shock-induced self-propagating exothermic reaction in Ti/Si multilayer nanofilms for low-power reactive bonding10.35848/1347-4065/ab827f ↗
2. Influence of bonding pressure on thermal resistance in reactively-bonded solder joints
3. Reactive multilayers fabricated by vapor deposition: a critical review10.1016/j.tsf.2014.09.042 ↗
4. Thresholds for igniting exothermic reactions in Al/Ni multilayers using pulses of electrical, mechanical, and thermal energy10.1063/1.4770478 ↗
5. Effect of intermixing on self-propagating exothermic reactions in Al/Ni nanolaminate foils10.1063/1.372005 ↗
6. Self-propagating formation reactions in Nb/Si multilayers10.1016/S0921-5093(98)01069-7 ↗
7. Explosive crystallization in zirconium silicon multilayers10.1116/1.575315 ↗
8. Propagation of explosive crystallization in thin Rh-Si multilayer films10.1116/1.573848 ↗
9. Growth of amorphous silicide during Ti/Si interfacial reactions in multilayer thin films10.1016/j.msea.2005.02.059 ↗
10. Shear-induced mixing governs codeformation of crystalline-amorphous nanolaminates10.1103/PhysRevLett.113.035501 ↗
11. The mechanisms of plastic strain accommodation during the high strain rate collapse of corrugated Ni-Al laminate cylinders10.1080/14786435.2014.948523 ↗
12. Quantitative investigation of titanium amorphous-silicon multilayer thin-film reactions10.1557/JMR.1990.0593 ↗
13. Plastic deformation dominates chemical reactions in Ti/Si multilayered nanofilms10.1016/j.msea.2018.09.031 ↗
14. Standard enthalpies of formation of some 3d transition metal silicides by high temperature direct synthesis calorimetry10.1016/S0925-8388(97)00528-8 ↗
15. Inorganic materials database for exploring the nature of material
16. Elemental process of amorphization induced by electron irradiation in Si10.1103/PhysRevB.65.115213 ↗
17. Different-shaped ultrafine MoNbTaW HEA powders prepared via mechanical alloying10.3390/ma11071250 ↗
18. Thermal shock resistance of continuous carbon fiber reinforced ZrC based ultra-high temperature ceramic composites prepared via Zr-Si alloyed melt infiltration10.1016/j.msea.2018.08.036 ↗
19. Precipitation sequence of middle Al concentration alloy using the inversion algorithm and microscopic phase field model10.1166/sam.2018.3430 ↗
20. Theoretical investigation of molybdenum/tungsten-vanadium solid solution alloy membranes: thermodynamic stability and hydrogen permeation10.1016/j.memsci.2020.118200 ↗
21. Trace bismuth and iodine co-doping enhanced thermoelectric performance of PbTe alloys10.1088/1361-6463/ab7d6c ↗
22. Tunneling-induced negative permittivity in Ni/MnO nanocomposites by a bio-gel derived strategy10.1039/C9TC06378A ↗