journal article·2024-02

Fabrication and mechanical properties of TiC coated short carbon fiber reinforced Ti5Si3–TiC composites

Yi Xiong, Wanli Wang, Zheng Ye, Jian Yang, Yue Zhao, Jihua Huang

Publisher page

Abstract

Ti5Si3-based composites reinforced with TiC-coated Cf and TiC particulate (TiC@Cf/Ti5Si3–TiC) were fabricated by spark plasma sintering. The performance of the TiC@Cf/Ti5Si3–TiC composite was comprehensively evaluated by investigating its mechanical properties at room temperature, as well as the thermal shock resistance, oxidation resistance and flexural strength at high temperatures. By employing optimal process parameters obtained through response surface methodology, the TiC@Cf/Ti5Si3–TiC composite exhibited a maximum room-temperature fracture toughness of 9.32 ± 1.05 MPa m1/2, which represented a significant increase of 261.2% and 23.1% compared to monolithic Ti5Si3 and TiC@Cf/Ti5Si3 composite, respectively. The flexural strength of the TiC@Cf/Ti5Si3–TiC composite measured at room temperature, 1000 °C, and after quenching from 1200 °C was 531 ± 61 MPa, 299 ± 43 MPa, and 138.4 ± 15 MPa, achieving an improvement of 221.8%, 128.2%, and 295.4% compared to monolithic Ti5Si3. The incorporation of TiC particulates appeared to mitigate the fiber-matrix interfacial reaction more effectively than that observed in the TiC@Cf/Ti5Si3 composite previously investigated. Consequently, the reinforcing mechanism of fiber pulling-out and debonding, crack blocking, deflection, and bridging was fully operational at heightened sintering temperatures. These essential factors play a vital role in remarkably enhancing the mechanical properties of the TiC@Cf/Ti5Si3–TiC composite.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced materials and composites · Advanced ceramic materials synthesis · MXene and MAX Phase Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. Controllable syntheses of Mo5Si3 and Mo3Si by silicothermic reduction of MoSi2 in the presence of lime10.1016/j.ceramint.2021.11.329 ↗
2. Mechanically activated SHS of Nb5Si3 and Nb5Si3/Nb composites10.1016/j.jallcom.2020.154228 ↗
3. Microstructures and properties of high melting point intermetallic Ti5Si3 and TiSi2 compounds10.1016/0921-5093(92)90081-B ↗
4. Formation of Ti5Si3 and V5Si3 by self-propagating high-temperature synthesis and evaluation of combustion wave kinetics10.1016/j.jallcom.2017.04.283 ↗
5. High temperature strength and failure of the Ni-base superalloy PM 303010.1016/j.ijplas.2008.06.005 ↗
6. Silicide-matrix materials for high-temperature applications10.1007/BF03220384 ↗
7. Plastic deformation of single crystals of Ti5Si3 with the hexagonal D88 structure Acta
8. Microstructure and mechanical properties of Ti5Si3 fabricated by spark plasma sintering10.1016/j.jallcom.2018.11.319 ↗
9. In-situ neutron diffraction of titanium silicide, Ti5Si3, during self-propagating high-temperature synthesis (SHS)10.1016/j.intermet.2005.04.004 ↗
10. Ti5Si3 and Ti5Si3-based alloys: Alloying behavior, microstructure and mechanical property evaluation10.1016/S1359-6454(98)00026-3 ↗
11. Effect of Ni addition on the formation mechanism of Ti5Si3 during self-propagation high-temperature synthesis and mechanical property10.1016/j.jeurceramsoc.2014.02.018 ↗
12. Explosion synthesis of Ti5Si3-Cu intermetallic compound Mater10.1016/S0921-5093(99)00257-9 ↗
13. Effect of starting SiC particle size on in situ fabrication of Ti5Si3/TiC composites10.1016/j.msea.2006.03.057 ↗
14. Microstructure and mechanical properties of an ultrafine grained Ti5Si3-TiC composite fabricated by spark plasma sintering10.1016/j.apt.2019.02.013 ↗
15. Microstructure and mechanical properties of in situ produced Ti5Si3/TiC nanocomposites10.1016/S0955-2219(01)00304-1 ↗
16. Strengthening and toughening of Ti5Si3 by TiC-coated short carbon fiber: fabrication, interfacial control, and mechanism of reinforcement10.1016/j.jeurceramsoc.2023.03.030 ↗
17. Heidenreich · 2008 · 113
18. Experimental description of thermomechanical properties of carbon fiber reinforced TiC matrix composites10.1016/S0261-3069(03)00124-9 ↗
19. Mechanical behaviour and oxidation resistance of structural silicides10.1179/174328006X79454 ↗
20. Tang · 2008 · vol. 16 · 1118
21. Thermal expansion of the Ti5Si3 and Ti6Si2B phases investigated by high-temperature X-ray diffraction10.1016/j.intermet.2005.05.007 ↗