journal article·2022-08

Early crack initiation mode during tensile fracture process in a punch-processed precipitation-hardened steel plates and evaluation method to treat the crack as an equivalent pre-crack

Kejin Zhang, Shigeru Hamada, Kotaro Shindome, Tatsuo Yokoi, Hiroshi Noguchi

Publisher page

Abstract

No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.

Source: Not provided · Quality: missing

Research context

OpenAlex topics: Metal Forming Simulation Techniques · High-Velocity Impact and Material Behavior · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. Failure during sheared edge stretching10.1007/s11665-008-9218-4 ↗
2. Review of the shearing process for sheet steels and its effect on sheared-edge stretching10.1007/s11665-011-9997-x ↗
3. Ductile-to-brittle transition in tensile failure due to shear-affected zone with a stress-concentration source: a comparative study on punched-plate tensile-failure characteristics of precipitation-hardened and dual-phase steels10.1007/s10704-018-0304-9 ↗
4. Effect of shear-affected zone on fatigue crack propagation mode10.1016/j.ijfatigue.2018.06.003 ↗
5. The significance of fatigue crack closure
6. A fatigue crack closure mechanism in titanium10.1111/j.1460-2695.1979.tb00372.x ↗
7. On crack closure in the near-threshold region10.1016/0036-9748(81)90041-7 ↗
8. Micromechanisms of deformation and fracture in shearing aluminum alloy sheet10.1016/S0020-7403(99)00034-X ↗
9. Fatigue behaviour of punched structural plates10.1016/j.engfailanal.2003.10.002 ↗
10. Effect of shear cutting on ductility of a dual phase steel10.1016/j.engfracmech.2008.10.009 ↗
11. A modified Gurson model and its application to punch-out experiments10.1016/j.engfracmech.2009.01.003 ↗
12. Characterization of cut-edges for improved automotive chassis and suspension fatigue cae life predictions10.1007/s11668-012-9577-x ↗
13. Effect of mechanical cut-edges on the fatigue and formability performance of advanced high-strength steels10.1007/s11668-012-9591-z ↗
14. Failure during sheared edge stretching of dual-phase steels10.1007/s11661-013-1718-7 ↗
15. Quantification of large deformation with punching in dual phase steel and change of its’ microstructure –part II: local strain mapping of dual phase steel by a combination technique of electron backscatter diffraction and digital image correlation methods10.2355/isijinternational.ISIJINT-2016-310 ↗
16. The influence of mechanical and CO2 laser cut-edge characteristics on the fatigue life performance of high strength automotive steels10.1016/j.jmatprotec.2010.09.018 ↗
17. Investigation on fatigue performance of cold expansion holes of 6061-T6 aluminum alloy10.1016/j.ijfatigue.2016.10.030 ↗
18. The influence of mechanical and laser cutting on the fatigue strengths of carbon and stainless sheet steels10.1034/j.1600-0692.2001.300506.x ↗
19. Effect of the cutting process on the fatigue behaviour of press hardened and high strength dual phase steels10.1016/j.jmatprotec.2013.05.003 ↗
20. Quantification of large deformation with punching in dual phase steel and change of its' microstructure – part III: micro-tensile behavior of pre-strained dual-phase steel10.2355/tetsutohagane.TETSU-2015-085 ↗
21. Lattice defects in ceramics
22. Liebowitz · 1968 · vol. 2
23. Dieter · 2001
24. Anderson · 2005
25. Abbaschian · 2009
26. Effect of microstructural change due to shearing on use properties of hot rolled steel sheet
27. A fractographic feature of plane-strain fracture in 0.45C-Ni-Cr-Mo steel
28. Evaluation of fracture toughness by stretched zone method in machine structural steels10.2472/jsms.32.366 ↗
29. A modeling approach for the complete ductile–brittle transition region: cohesive zone in combination with a non-local Gurson-model10.1007/s10704-013-9914-4 ↗
30. Murakami · 2016
31. Murakami · 1987
32. Punching of ultra-high strength steel sheets using local resistance heating of shearing zone10.1016/j.jmatprotec.2011.10.021 ↗
33. Damage mechanics approach in crack growth simulation during the fine blanking process10.1504/IJMPT.2003.003465 ↗
34. Understanding the effects of mechanical and laser cut-edges to prevent formability ruptures during automotive manufacturing10.1007/s11668-013-9696-z ↗
35. Experimental and numerical analysis of micromechanical damage in the punching process for High-Strength Low-Alloy steels10.1016/j.matdes.2013.11.016 ↗
36. Effect of edge shape of tool in finish blanking10.4028/www.scientific.net/AMR.939.253 ↗
37. Effect of residual stresses on fatigue strength of high strength steel sheets with punched holes10.1016/j.ijfatigue.2015.06.018 ↗