journal article·2021-08

Enhanced solute diffusion to promote shear-type reverse transformation recovery in metastable austenitic stainless steel

Xuebing Liu, Xinfang Zhang

Publisher page

Abstract

Abstract The martensite reverse transformation behavior and the effect of microstructure differences on mechanical properties were investigated in metastable austenitic stainless steel. During continuous heating, whether annealing or pulsed electric field treatment, the deformation-induced martensite transforms to austenite by diffusionless shear reversion. In subsequent isothermal holding, the samples treated by pulsed electric treated accomplish the reverse transformation from martensite to austenite, and forming the equiaxed, defect-free austenite grains, but the martensitic reversion in annealed samples is incomplete, consisting of the diffusion-type austenite, lath-type austenite and dislocation cells. The difference in microstructure is caused by atomic diffusion in essence. Under a pulsed electric field, the atom receives an electric force that reduces the activation energy required for diffusion. Therefore, the atom diffusion is promoted, which accelerates the dislocations climbing and subgrain boundaries coalescence and then promoting the schedule of recrystallization. As a result, the difference in microstructure has a significant effect on the mechanical properties, i.e., the annealed cold-rolled austenitic stainless steels have higher strength with poor ductility, yet the pulsed steels present an excellent ductility. The reason for the difference in mechanical properties is likely to the phase transformation-induced plasticity responses.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electromagnetic Effects on Materials · Hydrogen embrittlement and corrosion behaviors in metals · Microstructure and Mechanical Properties of Steels

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (58)

Show source-provided references
1. Inverse temperature dependence of toughness in an ultrafine grain-structure steel10.1126/science.1156084 ↗
2. Creep-resistant, Al2O3-forming austenitic stainless steels10.1126/science.1137711 ↗
3. M. Koyama, Z. Zhang, M. Wang, D. Ponge, D. Raabe, K. Tsuzaki, H. Noguchi, C.C. Tasan, Bone-like crack resistance in hierarchical metastable nanolaminate steels, Science 355 (355) 1055-1057.10.1126/science.aal2766 ↗
4. Brittle intermetallic compound makes ultrastrong low-density with large ductility10.1038/nature14144 ↗
5. Ultrastrong steel via minimal lattice misfit and high-density nanoprecipitation10.1038/nature22032 ↗
6. Strain hardening behavior of phase reversion-induced nanograined/ultrafine-grained (NG/UFG) austenitic stainless steel and relationship with grain size and deformation mechanism10.1016/j.msea.2014.06.065 ↗
7. Martensite shear phase reversion-induced nanograined/ultrafine-grained Fe–16Cr–10Ni alloy: the effect of interstitial alloying elements and degree of austenite stability on phase reversion10.1016/j.msea.2010.08.051 ↗
8. Nano/ultrafine grained austenitic stainless steel through the formation and reversion of deformation-induced martensite: mechanisms, microstructures, mechanical properties, and TRIP effect10.1016/j.matchar.2015.03.031 ↗
9. Nanograined/Ultrafine-grained structure and tensile deformation behavior of shear phase reversion-induced 301 austenitic stainless steel10.1007/s11661-010-0230-6 ↗
10. Deformation behavior of high yield strength – high ductility ultrafine-grained 316LN austenitic stainless steel10.1016/j.msea.2017.02.009 ↗
11. Reverse transformation mechanism of martensite to austenite in a metastable austenitic alloy10.1016/j.msea.2009.02.010 ↗
12. Martensite → austenite phase transformation kinetics in an ultrafine-grained metastable austenitic stainless steel10.1016/j.actamat.2010.10.012 ↗
13. Reversion mechanism from deformation induced martensite to austenite in metastable austenitic stainless steels10.2355/isijinternational.31.1431 ↗
14. Optimal chemical composition in Fe-Cr-Ni alloys for ultra grain refining by reversion from deformation induced martensite10.2355/isijinternational.31.721 ↗
15. The effect of heating rate on the martensite to austenite transformation in Fe-Ni-C alloys10.1016/0001-6160(72)90077-6 ↗
16. Effects of Carbon content and a usaging on γ↔α' transformation behavior and reverse-transformed structure in Fe-Ni-Co-Al-C alloys10.1007/BF02646675 ↗
17. Lee · J. Kor. Inst. Met. Mater. · 1992 · 30 · 1317
18. Influence of annealing treatment on the formation of nano/submicron grain size AISI 301 austenitic stainless steels10.1007/BF02586207 ↗
19. Development of ultra fine grain structure by martensitic reversion in stainless steel10.1023/A:1015757710546 ↗
20. Effect of conditions of thermomechanical treatment on the reverse transformation behavior from martensite to austenite in metastable austenitic Fe-Cr-Ni steels
21. Amount of retained austenite at room temperature after reverse transformation of martensite to austenite in an Fe-13% Cr-7% Ni-3% Si martensitic stainless steel10.1016/S1359-6462(01)01093-4 ↗
22. The effects of heating rate on the reverse transformation mechanism and the phase stability of reverted austenite in medium Mn steels10.1016/j.actamat.2013.12.038 ↗
23. Reverse transformation mechanism of martensite to austenite in a metastable austenitic alloy10.1016/j.msea.2009.02.010 ↗
24. The significant role of heating rate on reverse transformation and coordinated straining behavior in a cold-rolled austenitic stainless steel10.1016/j.msea.2018.07.024 ↗
25. Influence of electropulsing treatment on microstructure and mechanical properties of cold-rolled Mg-9Al-1Zn alloy strip10.1016/j.msea.2011.03.095 ↗
26. Hardening and softening mechanisms in a nano-lamellar austenite steel induced by electropulsing treatment10.1016/j.msea.2017.12.011 ↗
27. Microstructure and texture evolution of cold-rolled Mg-3Al-1Zn alloy by electropulse treatment stimulating recrystallization10.1016/j.scriptamat.2015.09.001 ↗
28. Experimental mechanical properties of ultra-fine grain AZ31 alloy by the combined processing of ECAP, rolling and EPT10.1016/j.msea.2018.05.112 ↗
29. An ultrafast performance regeneration of aged stainless steel by pulsed electric current10.1016/j.scriptamat.2018.05.004 ↗
30. Segregation of lead in Cu-Zn alloy under electric current pulses
31. Effect of electric current on the recrystallization behavior of cold worked α-Ti10.1016/S0036-9748(88)80331-4 ↗
32. Effect of an electric field on the recovery and recrystallization of Al and Cu10.1016/0036-9748(89)90252-4 ↗
33. Electric current-induced annealing during uniaxial tension of aluminum alloy10.1016/j.scriptamat.2013.11.019 ↗
34. Achieving outstanding combination of strength and ductility of the Al-Mg-Li alloy by cold-rolling combined with electropulsing assisted treatment10.1016/j.matdes.2019.108279 ↗
35. Fultz · 2012
36. Thermal stability of ultrafine-grained austenitic stainless steels10.1016/j.msea.2010.05.049 ↗
37. The lattice stability of metals-Ⅲ, Iron10.1016/0001-6160(63)90157-3 ↗
38. Effects of alloying elements and thermomechanical treatments on mechanical and magnetic properties of Cr-Ni austenitic stainless steel10.2355/isijinternational.30.608 ↗
39. Enhanced mechanical properties through reversion in metastable austenite stainless steels10.1007/s11661-008-9723-y ↗
40. Suppressing precipitation during the reverse transformation from martensite to austenite in a cold-rolled austenitic stainless steel10.1016/j.msea.2020.140514 ↗
41. Nanoscale austenite reversion through partitioning, segregation and kinetic freezing: example of a ductile 2 GPa Fe-Cr-C steel10.1016/j.actamat.2012.01.045 ↗
42. Microstructural evolutions during reversion annealing of cold-rolled AISI 316 austenitic stainless steel10.1007/s11661-018-4583-6 ↗
43. Effect of pre-cold-working on diffusional reversion of deformation induced martensite in metastable austenitic stainless steel10.2355/isijinternational.34.522 ↗
44. Crystallography and structural evolution during reverse transformation in an Fe-17Cr-0.5C tempered martensite10.1016/S1359-6454(00)00015-X ↗
45. Driving force in electromigration10.1103/PhysRevB.10.1266 ↗
46. Electromigration in metals10.1088/0034-4885/52/3/002 ↗
47. Effect of current pulse on mechanism of superplastic deformation of 2091 Al-Li alloy
48. Callister · 2007
49. Porter · 2009
50. Effect of electric current pulse on the recrystallization kinetics of copper10.1016/S0036-9748(88)80340-5 ↗
51. Combined athermal and isothermal marteniste to austenite reversion kinetics, experiment and modelling10.1016/j.matdes.2020.109124 ↗
52. Fundamentals of isothermal austenite reversion in a Ti-stabilized 12Cr-6Ni-2Mo supermartensitic stainless steel: thermodynamics versus experimental assessments10.1016/j.actamat.2019.05.026 ↗
53. Phase-field simulation of austenite reversion in a Fe-9.6Ni-7Mn (at. %) martensite steel governed by a coupled diffusional/displacive mechanism10.1016/j.matdes.2019.108426 ↗
54. Evolution of microstructure and mechanical properties in a cold deformed nitrogen bearing TRIP-assisted duplex stainless steel after reversion annealing10.1016/j.msea.2016.10.105 ↗
55. Stress-induced martensitic transformation behaviors at various temperatures and their TRIP effects in SUS304 metastable austenitic stainless steel10.2355/isijinternational.51.124 ↗
56. The effect of annealing on the microstructural evolution and mechanical properties in phase reversed 316LN austenitic stainless steel10.1016/j.msea.2018.02.018 ↗
57. Design of a novel Mn-based 1 GPa duplex stainless TRIP steel with 60 % ductility by a reduction of austenite stability10.1016/j.actamat.2011.04.011 ↗
58. Tailoring the microstructure and mechanical properties if AISI 316L austenitic stainless steel via cold rolling and reversion annealing10.1016/j.msea.2019.05.028 ↗