journal article·2019-03

Grain-wise simulation of stochastic damage and failure verified on a TiAl polycrystal

M.R. Kabir, A. Cornec

Publisher page

Abstract

Abstract Microstructure of alloys contains typically stochastic distributed constituents (grains) with uneven properties. Recent progresses in computational modelling enable microstructure-sensitive and multi-scale simulations methods, where stochastic properties can be considered with an increasing resolution of local details. In this work a stochastic approach was proposed where several numerical aspects are treated in a finite element framework: (i) determination of grain-wise properties; (ii) the kind of stochastic distribution; (iii) introduction of necessary but appropriate idealizations regarding real microstructure; (iv) use of appropriate constitutive models for deformation, damage and fracture. The proposed stochastic approach was applied and verified on a TiAl polycrystal with significant stochastic nature. The strong anisotropic deformation behaviour, due to the oriented lamellar grains consisting of relevant TiAl phases (α2 and γ), was determined at first by a two-scale crystal plasticity model, and then, the results were transformed to a homogenized grain behaviour corresponding to each oriented lamellar grains. The simulations provide a significant deformation scatter which was used in the presented stochastic approach. Regarding the stochastic evolution of damage till failure, a cohesive model was applied at idealized grains along the fracture plane. Simulation results showed that failure of the first grain was closely related to the macroscopic failure of tensile tests, which provides estimation of grain-wise damage properties. Further, unsymmetrical weighted distribution shapes were introduced to consider inhomogeneous dispersed properties. The cohesive model with these stochastic properties allows a deep and qualified understanding of internal grain-wise damage evolution, first grain failure, and unstable crack extension across the fracture surface. In particular, deformation constraints among grains with different properties play major roles in the evolution of the local damage till component failure.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · High-Velocity Impact and Material Behavior · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. Microstructure and deformation of two-phase γ-titanium aluminides10.1016/S0927-796X(97)00018-1 ↗
2. A study of mechanical properties and microscopic stress of a two-phase TiAl-based intermetallic alloy10.1016/S0921-5093(01)01152-2 ↗
3. Microstructure and tensile properties of cast Ti-44Al-4Nb-4Hf-0.1Si-0.1B alloy with refined lamellar microstructures10.1016/j.intermet.2009.03.002 ↗
4. The mechanical properties of different lamellae and domains in PST-TiAl investigated with nanoindentations and atomic force microscopy10.1016/S0921-5093(01)01561-1 ↗
5. Mechanical anisotropy of a gamma titanium aluminide alloy after hot extrusion10.1557/PROC-552-KK5.13.1 ↗
6. The effect of microstructure on fracture toughness and fatigue crack growth behavior in γ-titanium aluminide based intermetallics10.1007/s11661-999-0048-2 ↗
7. Plastic deformation and fracture of binary TiAl-base alloys10.1007/BF02656810 ↗
8. Strength and ductility in TiAl alloys10.1016/S0966-9795(98)00037-5 ↗
9. Deformation and fracture characteristics in TiAl at room temperature and 800 °C10.1016/S0921-5093(97)00343-2 ↗
10. Numerical Simulation of plastic deformation and fracture in polysynthetically twinned (PST) crystals of TiAl10.1016/S0927-0256(00)00144-0 ↗
11. The role of superdislocations for modeling plastic deformation of lamellar TiAl10.1016/j.ijplas.2006.02.005 ↗
12. Micromechanical modelling of deformation and fracture in lamellar gamma-TiAl alloys
13. Numerical simulation of crack growth in an isotropic solid with randomized internal cohesive bonds10.1016/S0022-5096(97)00047-1 ↗
14. Simulation of quasi-brittle fracture of lamellar γTiAl using the cohesive model and a stochastic approach10.1016/j.commatsci.2006.03.028 ↗
15. heterogeneous cohesive model for quasi-brittle materials considering spatially varying random fracture properties10.1016/j.cma.2008.03.027 ↗
16. Guidelines for Applying Cohesive Models to the Damage Behaviour of Engineering Materials and Structures10.1007/978-3-642-29494-5 ↗
17. Room-temperature tensile deformation of polysynthetically twinned (PST) crystals of TiAl10.1016/0956-7151(92)90472-Q ↗
18. Deformation of polysynthetically twinned crystals of TiAl with nearly stoichiometric composition10.1080/01418619008231937 ↗
19. Deformation structure in Ti-rich polysynthetically twinned crystals
20. Use of Weibull statistics to quantify property variability in TiAl alloys10.1007/s11661-002-0298-8 ↗
21. Strength properties of a precipitation high niobium containing titanium aluminide alloy
22. The fracture resistance of a binary TiAl alloy10.1007/s11661-000-0054-x ↗
23. Intrinsic and extrinsic fracture resistance in lamellar TiAl alloys10.1016/j.actamat.2004.06.026 ↗
24. Ductility and toughness in intermetallics10.1016/S0966-9795(98)00061-2 ↗
25. Deformation and fracture of PST crystals and directionally solidified ingots of TiAl-based alloys10.1016/S0966-9795(98)00055-7 ↗
26. Fracture behaviour and toughness of PST crystals of TiAl10.1016/1359-6454(95)00255-3 ↗
27. Mechanistic modeling of deformation and fracture behavior in TiAl and Ti3Al10.1016/0921-5093(94)03206-8 ↗
28. Fracture in lamellar TiAl simulated with the cohesive model10.1016/j.engfracmech.2006.09.022 ↗
29. Kabir · 2008
30. Numerical investigation of room-temperature deformation behaviour of a duplex type γTiAl alloy using a multi-scale modelling approach10.1016/j.actamat.2010.06.058 ↗
31. Use of spherical indentation technique for property variations of γTiAl10.1557/jmr.2011.366 ↗
32. Numerical prediction of the stress-strain response of a lamellar γtial polycrystal using a two-scale modelling approach10.1016/j.msea.2014.10.018 ↗
33. Simulation of cup cone fracture using the cohesive model10.1016/S0013-7944(03)00133-4 ↗
34. Plastic deformation of single crystal of a D019 compound with an off-stoichiometric composition (Ti-36.5 at% Al) at room temperature10.1080/01418619308225357 ↗
35. Microstructure and mechanical properties of a two-phase TiAl alloy containing Mo in single-, DS- and polycrystalline forms10.2320/matertrans1989.37.1197 ↗
36. MATLAB and Statistics Toolbox, The MathWorks, Inc., Natick, Massachusetts, United States, 2012.