journal article·2018-07

An experimental and mathematical study on the evolution of ultrafine ferrite structure during isothermal deformation of metastable austenite

Madhumanti Mandal, Sudipta Patra, Kumar Aniket Anand, Debalay Chakrabarti

Publisher page

Abstract

Abstract Heavy deformation of metastable austenite at intercritical temperature is known to develop ‘ultrafine ferrite-grain’ (ULFG) structure and provide grain boundary strengthening. Systematic thermomechanical simulation was conducted in Gleeble®3500 by deforming the samples isothermally at two intercritical temperatures: 810 °C (~40 °C below Ae3 and ~160 °C above Ar3) and 710 °C (~140 °C below Ae3 and ~60 °C above Ar3) to identify the critical conditions for the formation of ULFG structure in a low carbon microalloyed steel. Both single-pass and multi-pass deformations with varying equivalent total strain level were considered in order to provide a solution towards the development of ULFG structure upon industrial rolling. Microstructure evolution suggested that multi-pass intercritical deformation can produce uniform distribution of ultrafine ferrite grains (grain size ≤ 2 µm) as a combined effect of static- and dynamic strain-induced transformations (SSIT and DSIT) and continuous dynamic recrystallization (CDRX). Based on the microstructural evidences and strain analysis following Militzer-Brechet model, a descriptive model has been proposed discussing the mechanism of grain refinement during isothermal intercritical deformation.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (40)

Show source-provided references
1. Overview of processing, microstructure and mechanical properties of ultrafine grained bcc steels10.1016/j.msea.2006.08.095 ↗
2. Ultrafine grained structure formation in steels using dynamic strain induced transformation processing10.1179/174328006X102538 ↗
3. Mechanical properties of an ultrafine grained C–Mn steel processed by warm deformation and annealing10.1016/j.actamat.2005.07.009 ↗
4. Nanoscale crystallographic analysis of ultrafine grained IF steel fabricated by ARB process10.1016/S1359-6462(02)00088-X ↗
5. Formation of ultra-fine ferrite in hot rolled strip: potential mechanisms for grain refinement10.1016/S0921-5093(00)01823-2 ↗
6. The production of ultrafine ferrite in low-carbon steel by strain-induced transformation10.1007/s11661-002-0203-5 ↗
7. Strain-induced transformation in a low carbon microalloyed steel during hot compression testing10.1016/j.scriptamat.2005.11.026 ↗
8. Grain refinement in dual-phase steels10.1007/s11661-009-9899-9 ↗
9. Deformation and fracture mechanisms in fine- and ultrafine-grained ferrite/martensite dual-phase steels and the effect of aging10.1016/j.actamat.2010.10.002 ↗
10. Model for the Formation of Ultrafine Grained Steels10.2355/isijinternational.48.1046 ↗
11. Dynamic adjustment of ferrite grains during dynamic strain induced transformation10.1179/174328407X226617 ↗
12. Effect of transformation mechanism (static or dynamic) on final ferrite grain size10.1179/174328408X259061 ↗
13. The effect of multiple deformations on the formation of ultrafine grained steels10.1007/s11661-006-9080-7 ↗
14. Deformation induced ferrite transformation in low carbon steels10.1016/j.cossms.2006.02.014 ↗
15. Combined macro–micro modeling for rolling force and microstructure evolution to produce fine grain hot strip in tandem hot strip rolling10.2355/isijinternational.47.1475 ↗
16. Super short interval multi-pass rolling process for ultrafine-grained hot strip10.2355/isijinternational.48.1142 ↗
17. Refinement of ferrite grain size near the ultrafine range by multipass, thermomechanical compression10.1007/s11661-012-1213-6 ↗
18. Formation of ultrafine ferrite grains during interrupted multi-pass deformation under hot torsion, 2007
19. Delamination effect on impact properties of ultrafine-grained low-carbon steel processed by warm caliber rolling10.1007/s11661-009-0093-x ↗
20. Effect of initial microstructure on impact toughness of 1200 MPa-class high strength steel with ultrafine elongated grain structure10.1007/s11661-013-2045-8 ↗
21. Enhancement of impact toughness by delamination fracture in a low-alloy high-strength steel with Al alloying10.1007/s11661-016-3707-0 ↗
22. Formation of ultrafine grained dual phase steels through rapid heating10.2355/isijinternational.51.958 ↗
23. Effect of deformation parameters on the no-recrystallization temperature in Nb-bearing steels10.1007/BF02648589 ↗
24. The formation of ultrafine ferrite through static transformation in low carbon steels10.1016/j.actamat.2007.05.024 ↗
25. Crystallography and kinetics of dynamic transformation in steels10.2355/isijinternational.48.1056 ↗
26. Ultrafine ferrite formation through isothermal static phase transformation10.1016/j.actamat.2011.03.043 ↗
27. A novel observation strain-induced ferrite-to-austenite retransformation after intercritical deformation of C-Mn steel
28. Monte carlo-method simulation of the deformation-induced ferrite transformation in the Fe-C system10.1007/s11661-004-0263-9 ↗
29. Prediction of post-dynamic austenite-to-ferrite transformation and reverse transformation in a low-carbon steel by cellular automaton modeling10.1016/j.actamat.2012.06.007 ↗
30. Phenomenological model for deformation-induced ferrite transformation10.1007/s11661-009-9926-x ↗
31. Micromechanical and macromechanical effects in grain scale polycrystal plasticity experimentation and simulation10.1016/S1359-6454(01)00242-7 ↗
32. Numerical simulation of dynamic strain-induced austenite–ferrite transformation in a low carbon steel10.1016/j.actamat.2009.03.005 ↗
33. Dieter · Mechanical Metallurgy · 1986
34. A dislocation model for the stress-strain behaviour of polycrystalline α-Fe with special emphasis on the variation of the densities of mobile and immobile dislocations10.1016/0025-5416(70)90081-9 ↗
35. Development of ultrafine-grained dual-phase steels: mechanism of grain refinement during intercritical deformation10.1007/s11661-013-1757-0 ↗
36. Recovery and recrystallization during high temperature deformation of α-iron10.1007/BF02643086 ↗
37. Dynamic recrystallization of ferrite during warm deformation of ultrafine grained ultra-low carbon steel10.1016/j.scriptamat.2005.05.027 ↗
38. Grain boundary diffusion controlled ultrafine grain formation during large strain-high Z deformation of coarse (200 μm) grained ultra-low carbon steel10.1016/j.msea.2006.12.078 ↗
39. Prediction of transformation textures in steels10.1016/0956-7151(90)90116-X ↗
40. Effect of Nb on dynamic strain induced austenite to ferrite transformation10.1179/174328407X168900 ↗