journal article·2017-08

Improvement of low-cycle fatigue resistance of Co-Ni alloys by silicon addition

Ilya Nikulin, Takahiro Sawaguchi

Publisher page

Abstract

Abstract The effect of silicon alloying on the low-cycle fatigue (LCF) resistance and fatigued microstructure of the Co–31Ni, Co–31Ni–3Si, Co–33Ni, and Co–33Ni–3Si (in wt%) alloys was studied under an axial strain control mode at the total strain amplitude, Δ e t /2, of 0.01. The addition of 3 wt% of Si increases the fatigue life, N f , of the examined Co alloys by more than 2.5 times. For instance, N f of ~ 4000 and 10,000 cycles were achieved in the Co–31Ni and Co–31Ni–3Si alloys, respectively. It was observed that improved LCF resistance of the Si added Co alloys results from the moderate kinetics of the deformation-induced e -martensitic transformation ( e -MT) and inhibited cross-slip of perfect dislocations provided by solid solution hardening of the austenite. The similarity in the fatigue behavior and fatigued microstructure of the Si added Co alloys and Fe-based high-Mn alloys is discussed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · High Temperature Alloys and Creep · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. Campbell · 2008
2. Klesnil · 1980
3. Iron-based shape memory alloys for civil engineering structures: an overview10.1016/j.conbuildmat.2014.04.032 ↗
4. State-of-the-knowledge on TWIP steel10.1179/1743284711Y.0000000095 ↗
5. High manganese austenitic twinning induced plasticity steels: a review of the microstructure properties relationships10.1016/j.cossms.2011.04.002 ↗
6. High strength Fe–Mn–(Al, Si) TRIP/TWIP steels development – properties – application10.1016/S0749-6419(00)00015-2 ↗
7. Influence of temperature on fatigue-induced martensitic phase transformation in a metastable CrMnNi-steel10.1007/s11661-014-2723-1 ↗
8. Effect of γ to ε martensitic transformation on low-cycle fatigue behaviour and fatigue microstructure of Fe–15Mn–10Cr–8Ni–xSi austenitic alloys10.1016/j.actamat.2015.12.002 ↗
9. In situ microscopic observations of low-cycle fatigue-crack propagation in high-Mn austenitic alloys with deformation-induced ε-martensitic transformation10.1016/j.actamat.2016.04.042 ↗
10. A remarkable improvement of low-cycle fatigue resistance of high-Mn austenitic TWIP alloys with similar tensile properties: importance of slip mode10.1016/j.actamat.2016.07.034 ↗
11. Designing Fe–Mn–Si alloys with improved low-cycle fatigue lives10.1016/j.scriptamat.2014.11.024 ↗
12. Effect of strain amplitude on the low-cycle fatigue behavior of a new Fe–15Mn–10Cr–8Ni–4Si seismic damping alloy10.1016/j.ijfatigue.2016.03.021 ↗
13. Effect of alloying composition on low-cycle fatigue properties and microstructure of Fe–30Mn–(6-x)Si–xAl TRIP/TWIP alloys10.1016/j.msea.2013.08.061 ↗
14. Kinetics of F.C.C. deformation twining and its relationship to stress-strain behaviour10.1016/0001-6160(78)90170-0 ↗
15. The slip character and low cycle fatigue behaviore: the influence of F.C.C. twining and strain-induced F.C.C. + H.C.P. martensitic transformation10.1016/0001-6160(80)90042-5 ↗
16. Shape memory effect in Co-Ni polycrystalline alloys
17. Origin of shape memory effect in Co–Ni alloys undergoing fcc⇌hcp martensitic transformation10.1016/j.msea.2015.05.037 ↗
18. Effect of adding Si on shape memory effect in Co–Ni alloy system10.1016/j.msea.2006.04.121 ↗
19. Remarkable improvement of shape-memory effect in a Co-31Ni-3Si alloy by ausforming10.1007/s11661-015-2761-3 ↗
20. Remarkable improvement of shape memory effect in a Co–31Ni–3Si alloy by training treatment10.1016/j.msea.2014.08.086 ↗
21. ASTM E606/E606M-12 Standard test method for strain-controlled fatigue testing.
22. The resistance of metals to cyclic deformation
23. Effect of deformation temperature on low-cycle fatigue properties of Fe-28Mn-6Si-5Cr shape memory alloy10.2320/matertrans.MBW201503 ↗
24. Microstructure evolution associated with a superior low-cycle fatigue resistance of the Fe-30Mn-4Si-2Al alloy10.1007/s11661-015-3127-6 ↗
25. Deformation behavior of Fe-Mn-Cr-N austenitic steel10.1016/S1044-5803(98)00043-6 ↗
26. Fatigue crack growth in some copper base alloys
27. On the low-cycle fatigue response of pre-strained austenitic Fe61Mn24Ni6.5Cr8.5 alloy showing TWIP effect10.1016/j.ijfatigue.2012.01.002 ↗
28. Effects of cold rolling on microstructure and mechanical properties of Fe–30Mn–3Si–4Al–0.093C TWIP steel10.1016/j.msea.2012.10.020 ↗
29. Improvement of the mechanical properties of high manganese steels by combination of precipitation hardening and mechanical twinning
30. Thermodynamic calculation of stacking fault energy in Fe–Mn–Si shape memory alloys10.1016/S0261-3069(00)00006-6 ↗
31. Cold rolling behaviour of an austenitic Fe–30Mn–3Al–3Si TWIP-steel: the importance of deformation twinning10.1016/j.actamat.2003.12.040 ↗
32. Stacking fault probability and stacking fault energy in CoNi alloys
33. On the stress dependence of partial dislocation separation and deformation microstructure in austenitic stainless steels10.1016/S1359-6454(03)00117-4 ↗
34. Effect of thermal cycling on the martensitic transformation in an Fe-24Mn-6Si shape memory alloys10.2320/matertrans1989.33.263 ↗
35. Mechanisms of slip mode modification in F.C.C. solid solutions10.1016/0956-7151(90)90126-2 ↗
36. A Mechanism for the strain-induced nucleation of martensitic transformation10.1016/0022-5088(72)90173-7 ↗