Prolonged creep lifetime of ferritic self-healing steels achieved by offline healing treatment
Source abstract
Abstract
For the ferritic self-healing (FSH) steel, it remains challenging to solve the low healing efficiency problem, due to the mismatch between the formation kinetics of creep cavities and the precipitation kinetics of healing agents. In this research, an offline healing treatment has been proposed to stimulate the formation of the Laves phase precipitates as self-healing agents to retard creep cavity growth at elevated temperatures. The corresponding treatment parameters were determined by the precipitation behaviors of Laves phases on the external free surfaces and internal cavity surfaces of FSH steels. Results have shown that the creep lifetime of the offline healing treated samples can be extended more than 30% compared to that of non-healed sample, while the creep rates can be reduced by one order of magnitude. The formation kinetics of Laves phases and creep cavities have been quantitatively analyzed. It was found that after the offline healing treatments, the average cavity sizes of the samples decreased significantly, while the growth rates of creep cavities rather than the nucleation kinetics are compensated by the healing phenomena of Laves phase formation. The relationship between the extended lifetime and filling ratios of creep cavities by the healing agents was established as well. The demonstrated potential of offline healing treatments provides a new strategy to cultivate the self-healing capabilities of heat resistant steels.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fire effects on concrete materials · High Temperature Alloys and Creep · Mechanical stress and fatigue analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. van der Zwaag · 2008
2. Shinya · 2008 · 219
3. Ghosh · 2009
4. Self‐healing phenomena in metals
5. Thermally activated precipitation at deformation-induced defects in Fe-Cu and Fe-Cu-BN alloys studied by positron annihilation spectroscopy10.1103/PhysRevB.81.094103 ↗
6. Positron annihilation study on repeated deformation/precipitation aging in Fe–Cu–B–N alloys10.1007/s10853-013-7411-9 ↗
7. Positron annihilation study of ageing precipitation in deformed Fe–Cu–B–N–C10.1080/14786435.2013.821211 ↗
8. Defect-induced Au precipitation in Fe–Au and Fe–Au–B–N alloys studied by in situ small-angle neutron scattering10.1016/j.actamat.2013.08.015 ↗
9. Preferential Au precipitation at deformation-induced defects in Fe–Au and Fe–Au–B–N alloys10.1016/j.jallcom.2013.09.011 ↗
10. Autonomous repair mechanism of creep damage in Fe-Au and Fe-Au-B-N alloys10.1007/s11661-015-3169-9 ↗
11. Autonomous filling of creep cavities in Fe-Au alloys studied by synchrotron X-ray nano-tomography10.1016/j.actamat.2016.09.023 ↗
12. Self healing of radiation-induced damage in Fe–Au and Fe–Cu alloys: combining positron annihilation spectroscopy with TEM and ab initio calculations10.1016/j.jallcom.2019.152765 ↗
13. Autonomous filling of grain-boundary cavities during creep loading in Fe-Mo alloys10.1007/s11661-016-3642-0 ↗
14. Self healing of creep damage in iron-based alloys by supersaturated tungsten10.1016/j.actamat.2019.01.014 ↗
15. Competitive healing of creep-induced damage in a ternary Fe-3Au-4W alloy10.1007/s11661-020-05862-6 ↗
16. A first step towards computational design of W-containing self-healing ferritic creep resistant steels10.1080/14686996.2020.1814679 ↗
17. The design of a compositionally robust martensitic creep-resistant steel with an optimized combination of precipitation hardening and solid-solution strengthening for high-temperature use10.1016/j.actamat.2014.06.007 ↗
18. A strain-based computational design of creep-resistant steels10.1016/j.actamat.2013.10.004 ↗
19. Mclean · 1984
20. The effect of reheat treatment on microstructure and stress rupture property of a directionally solidified nickel-based superalloy after long-term thermal exposure10.1016/j.msea.2017.03.116 ↗
21. On the rejuvenation of crept Ni-Base single crystal superalloys (SX) by hot isostatic pressing (HIP)10.1016/j.msea.2019.04.078 ↗
22. Study on the microstructural degradation and rejuvenation heat treatment of directionally solidified turbine blades10.1016/j.jallcom.2020.154474 ↗
23. Yang · 2022
24. Localised creep cavitation on boron nitride in the heat affected zone of 9% Cr tempered martensitic steel welds10.1016/j.matdes.2020.109046 ↗
25. Linking surface precipitation in Fe-Au alloys to its self-healing potential during creep loading10.1007/s11661-017-4025-x ↗
26. Surface precipitation of supersaturated solutes in a ternary Fe–Au–W alloy and its binary counterparts10.1007/s10853-020-05571-w ↗
27. Connecting the precipitation behaviors on internal cavity surfaces and external surfaces in an Al–Si alloy10.1007/s11661-022-06799-8 ↗
28. Study on the effect of ageing on laves phase evolution and their effect on mechanical properties of P92 steel10.1016/j.msea.2018.01.035 ↗
29. Laves phase evolution in a modified P911 heat resistant steel during creep at 923 K10.1016/j.msea.2011.10.064 ↗
30. Evolution of the laves phase in ferritic heat-resistant steels during long-term annealing and its influence on the high-temperature strength10.1007/s11661-014-2505-9 ↗
31. Anelasticity in austenitic stainless steel10.1016/j.actamat.2012.08.060 ↗
32. Anelasticity of the martensitic phase of Ni55Fe18Ga27 single crystals in hyperstabilized and nonstabilized states10.1016/j.jallcom.2022.164528 ↗
33. Correlation of creep fracture lifetime with microstructure evolution and cavity behaviors in G115 martensitic heat-resistant steel10.1016/j.msea.2020.139468 ↗
34. Relationship between Laves phase and the impact brittleness of P92 steel reevaluated10.1016/j.msea.2015.05.012 ↗
35. Study on Laves phase in an advanced heat-resistant steel10.1007/s11706-009-0063-7 ↗
36. Characterisation of Laves phase precipitation and its correlation to creep rupture strength of ferritic steels10.1016/j.matchar.2014.10.004 ↗
37. Influence of Laves phase on creep strength of modified 9Cr-1Mo steel10.1016/j.msea.2017.08.111 ↗
38. A new method of predicting creep life10.1179/030634572790446181 ↗
39. Continuous cavity nucleation and creep fracture10.1016/0036-9748(83)90065-0 ↗
40. Fu · 2022
41. Effect of microstructural evolution on high-temperature strength of 9Cr–3W–3Co martensitic heat resistant steel under different aging conditions10.1016/j.msea.2013.09.033 ↗
42. On Laves phase in a 9Cr3W3CoB martensitic heat resistant steel when aged at high temperatures10.1016/j.jmst.2020.12.062 ↗
43. Recent progress on the modelling of the minimum creep strain rate and the creep cavitation damage and fracture
44. The development of creep damage constitutive equations for high Cr steel10.1080/09603409.2020.1716145 ↗
45. The cavity size distribution function for continuous cavity nucleation. Rupture lifetimes and density changes