journal article·2023-02Open access

High temperature compression of Mo(Si,Al)2-Al2O3 composites

Aina Edgren, Erik Ström, Lars Frisk, Farid Akhtar, Magnus Hörnqvist Colliander

Abstract

The aim of this study was to investigate the effect on high temperature of mechanical properties of adding Al2O3 particles to polycrystalline Mo(Si,Al)2. Mo(Si,Al)2-Al2O3 composites, containing 0–25 wt% Al2O3 particles have been compression tested at 1300 °C, and the microstructure after deformation was studied using electron backscatter diffraction. It was shown that even small amounts (5 wt%) of Al2O3 particles resulted in a grain-refined material through inhibition of grain growth during sintering, which lead to lower flow stresses compared to the coarse-grained Al2O3-free material. The inverse grain size effect and post-test microstructure investigations suggest that creep-like deformation mechanisms dominate in fine grained Mo(Si,Al)2-Al2O3 composites at 1300 °C. In the materials containing 5–15 wt% Al2O3, the maximum stress decreased with increasing Al2O3 content. In materials with higher Al2O3 additions, the maximum stress increased with the Al2O3 addition, but did not reach the strength levels in the Al2O3-free reference material. It is suggested that the deformation behaviour is affected by electroplasticity effects as resistive heating was used. Electroplasticity contributes to the decrease in maximum stress observed in the lower Al2O3 containing materials, while this is outweighed by particle strengthening at higher Al2O3 contents.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Electromagnetic Effects on Materials · Intermetallics and Advanced Alloy Properties · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. CO2 and greenhouse gas emissions
2. The CO2 reduction potential for the European industry via direct electrification of heat supply (power-to-heat)10.1088/1748-9326/abbd02 ↗
3. Sandvik Materials Technology · 2012
4. Microstructural investigation of the initial oxidation at 1450 °C and 1500 °C of a Mo(Si,Al)2-based composite10.3184/096034009X464195 ↗
5. Oxidation behavior of a Mo(Si,Al)2-based composite at 300-1000 °C10.1016/j.intermet.2009.10.019 ↗
6. Oxidation behaviour of a Mo(Si,Al)2 based composite at 1500 °C10.1016/j.intermet.2011.05.002 ↗
7. Oxidation behavior of a Mo(Si,Al)2 composite at 900-1600 °C in dry air10.1007/s10853-012-6906-0 ↗
8. High temperature oxidation of Mo-Si-X intermetallics (X=Al, Ti, Ta, Zr and Y)10.1016/0966-9795(95)98935-2 ↗
9. Effect of minor alloying with Al on oxidation behaviour of MoSi2 at 1200 °C10.1016/S0921-5093(98)00972-1 ↗
10. Influence of yttrium doping on the oxidation of Mo(Si,Al)2 in air at 1500 °C
11. Plastic deformation of single crystals of Mo(Si,Al)2 with the C40 structure10.1080/01418619808223759 ↗
12. Mechanical properties of C40-based ternary Mo(Si,Al)2 and quaternary (Mo,Zr)(Si,Al)2 silicides10.1016/S1359-6462(97)00432-6 ↗
13. Strength and deformation mechanism of C40-based single crystal and polycrystalline silicides10.1016/S0921-5093(98)01056-9 ↗
14. Strong monolithic and composite MoSi2 materials by nanostructure design10.1016/S0921-5093(98)01044-2 ↗
15. Microstructure and mechanical properties of Mo-Si-Al alloy and Mo-Si-Al/SiC composite10.2497/jjspm.43.272 ↗
16. High temperature deformation of polycrystalline C40 Mo(Si,Al)210.1016/j.msea.2022.143387 ↗
17. Processing and properties of MoSi2-SiC and MoSi2-Al2O310.1016/S0921-5093(98)01073-9 ↗
18. Effect of carbon addition on the creep of molybdenum disilicide composites10.1016/0921-5093(94)03337-4 ↗
19. Strengthening of discontinuously reinforced MoSi2 composites at high temperatures10.1016/0921-5093(92)90320-Z ↗
20. The effect of deformation and reinforcement particles on the grain growth behavior of MoSi210.1557/PROC-322-41 ↗
21. Effects of carbon additions on the high temperature mechanical properties of molybdenum disilicide10.1016/0921-5093(92)90323-S ↗
22. Carbon additions to molybdenum disilicide: Improved high-temperature mechanical properties10.1111/j.1151-2916.1991.tb06829.x ↗
23. Variation of phase composition of Mo-Si-B alloys induced by boron and their mechanical properties and oxidation resistance10.1016/j.msea.2019.02.008 ↗
24. Strengthening of discontinuously reinforced MoSi2 composites at high temperatures10.1016/0921-5093(92)90320-Z ↗
25. Lattice variations and phase evolutions during combustion reactions in Mo-Si-Al system10.1016/j.jallcom.2008.04.033 ↗
26. Texture analysis with MTEX- free and open source software toolbox10.4028/www.scientific.net/SSP.160.63 ↗
27. J.D. French, S.M. Wiederhorn, H.J. Petrocic, Creep rupture of MoSi2/SiCp composites, in: Materials Research Society Symposium Proceedings, 1994, p. 203.
28. Elucidating the origin of electroplasticity in metallic materials10.4028/b-L4ep0O ↗
29. H. Conrad, D.I. Yang, Influence of an Electric Field on the Plastic Deformation of Fine-Grained MgO at High Homologous Temperatures, Technical Report, 2000, pp. 4045–4052.10.1016/S1359-6454(00)00203-2 ↗
30. The anisotropy of the action of electron and γ radiation on the deformation of zinc single crystals in the brittle state
31. Zhao · 2018
32. Influence of grain size and grain boundaries on the thermal and mechanical behavior of 70/30 brass under electrically-assisted deformation10.1016/j.msea.2013.02.066 ↗
33. Influence of an electric field on the plastic deformation of fine-grained Al2O310.1007/s11661-999-0119-4 ↗