Detwinning of face-centered cubic deformation twins at liquid nitrogen temperature
Source abstract
Abstract
The paper brings experimental results on low temperature (77 K) detwinning of deformation twins of the twin/matrix layered Cu-8at.%Al microstructure pre-created during room temperature plastic deformation. It was found that the 297 K→77 K temperature change does not cause any perturbation to potential activity of all three face-centered cubic detwinning modes. It means, the reverse mode (π) and the two pseudo-reverse modes (±π/3) of deformation twinning. These detwinning systems strongly contribute to the low temperature crystal plasticity of the twin/matrix structures controlling their extraordinary mechanical properties, i.e., large anisotropy and asymmetry of the tension/compression yield stress. As suggested, the effective increase of critical stresses of the detwinning modes, due to the temperature lowering, is caused by the combine effect of thermally assisted interactions of detwinning dislocations with the dislocation obstacles and the enhancement of internal stress field. The latter being directed in the pre-twinned material along the shear vector of the π detwinning mode. The obtained results point to the significant role that face-centered cubic detwinning shall play in design of many technological processes of large plastic deformation occurring at low temperatures, e.g., cold rolling of TWIP-type materials.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Microstructure and mechanical properties · Aluminum Alloys Composites Properties · Intermetallics and Advanced Alloy Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (52)
Show source-provided references
1. Low‐temperature deformation of copper single crystals10.1063/1.1722824 ↗
2. Deformation twinning10.1016/0079-6425(94)00007-7 ↗
3. Deformation twinning in nanocrystalline materials10.1016/j.pmatsci.2011.05.001 ↗
4. Investigation of work hardening behavior in multilayered steels architected by twinning induced plasticity steel and martensitic steel during uniaxial tension10.1016/j.msea.2021.140996 ↗
5. Mechanism of twinning induced plasticity in austenitic lightweight steel driven by compositional complexity10.1016/j.actamat.2021.116814 ↗
6. The mechanism of dynamic strain aging for type A serrations in tensile curves of a medium-Mn steel10.1016/j.actamat.2020.116613 ↗
7. Synergistic deformation pathways in a TWIP steel at cryogenic temperatures: in situ neutron diffraction10.1016/j.actamat.2020.09.075 ↗
8. Investigations of dislocation-type evolution and strain hardening during mechanical twinning in Fe-22Mn-0.6C twinning-induced plasticity steel10.1016/j.actamat.2020.05.062 ↗
9. Hydrogen-enhanced densified twinning (HEDT) in a twinning-induced plasticity (TWIP) steel10.1016/j.scriptamat.2020.08.047 ↗
10. High manganese austenitic twinning induced plasticity steels: a review of the microstructure properties relationships10.1016/j.cossms.2011.04.002 ↗
11. High strength Fe–Mn–(Al, Si) TRIP/TWIP steels development — properties — application10.1016/S0749-6419(00)00015-2 ↗
12. The effect of grain size and grain orientation on deformation twinning in a Fe–22 wt.% Mn–0.6 wt.% C TWIP steel10.1016/j.msea.2010.02.041 ↗
13. Revealing the strain-hardening behavior of twinning-induced plasticity steels: theory, simulations, experiments10.1016/j.actamat.2012.09.064 ↗
14. Twinning engineering of a CoCrFeMnNi high-entropy alloy10.1016/j.scriptamat.2021.113808 ↗
15. Microstructure evolution and critical stress for twinning in the CrMnFeCoNi high-entropy alloy10.1016/j.actamat.2016.07.038 ↗
16. Effects of temperature on mechanical properties and deformation mechanisms of the equiatomic CrFeNi medium-entropy alloy10.1016/j.actamat.2020.11.012 ↗
17. On the reverse mode of fcc deformation twinning10.1016/j.actamat.2012.08.028 ↗
18. Experimental studies on detwinning of face-centered cubic deformation twins10.1016/j.actamat.2015.11.025 ↗
19. Reversible twinning in pure aluminum10.1103/PhysRevLett.102.205504 ↗
20. Detwinning mechanisms for growth twins in face-centered cubic metals10.1016/j.actamat.2009.12.013 ↗
21. Deformation mechanisms in nanotwinned metal nanopillars10.1038/nnano.2012.116 ↗
22. Detwinning through migration of twin boundaries in nanotwinned Cu films under in situ ion irradiation10.1080/14686996.2018.1428877 ↗
23. Enhanced fatigue damage resistance of nanotwinned austenitic grains in a nanotwinned stainless steel10.1016/j.scriptamat.2017.04.011 ↗
24. Deformation mechanisms in an austenitic single-phase duplex microstructured steel with nanotwinned grains10.1016/j.actamat.2014.08.054 ↗
25. Microstructural modeling of the mechanical behavior of face-centered cubic nanocrystalline-twinned systems10.1007/s11661-018-5008-2 ↗
26. Tensile strain induced texture evolution in a Ni–Mo alloy with extremely fine nanotwinned columnar grains10.1016/j.msea.2021.141108 ↗
27. Investigating the compressive strength and strain localization of nanotwinned nickel alloys10.1016/j.actamat.2020.116507 ↗
28. Migration kinetics of twinning disconnections in nanotwinned Cu: an in situ HRTEM deformation study10.1016/j.scriptamat.2020.11.006 ↗
29. The transformation of slip dislocations during twinning of copper-aluminum alloy crystals10.1051/metal/199794091037 ↗
30. Detwinning of face-centered cubic deformation twins via the correspondence matrix approach10.1016/j.actamat.2015.09.020 ↗
31. Transformation of dislocations during twin variant reorientation in Ni–Mn–Ga martensite structures10.1016/j.scriptamat.2011.09.034 ↗
32. The theory of the crystallography of deformation twinning
33. Detwinning-twinning behavior during compression of face-centered cubic twin-matrix layered microstructure10.1016/j.msea.2020.139960 ↗
34. Anderson · 2017
35. A study on crystal plasticity of face-centered cubic structures induced by deformation twinning10.1016/j.actamat.2020.07.040 ↗
36. On the first direct observation of de-twinning in a twinning-induced plasticity steel10.1016/j.actamat.2018.06.029 ↗
37. In-situ neutron diffraction study on the tension-compression fatigue behavior of a twinning induced plasticity steel10.1016/j.scriptamat.2017.04.041 ↗
38. Experimental and self-consistent modeling study of de-twinning in a twinning-induced plasticity steel10.1007/s11837-019-03374-2 ↗
39. Reversible deformation in nanocrystalline TWIP steel during cyclic loading by partial slip reversal and detwinning10.1016/j.msea.2020.139251 ↗
40. Direct monitoring of twinning/detwinning in a TWIP steel under reversed cyclic loading10.1016/j.msea.2021.141250 ↗
41. Reversible cyclic deformation mechanism of gold nanowires by twinning–detwinning transition evidenced from in situ TEM10.1038/ncomms4033 ↗
42. Scale law of complex deformation transitions of nanotwins in stainless steel10.1038/s41467-019-09360-1 ↗
43. In-situ neutron diffraction investigation on twinning/detwinning activities during tension-compression load reversal in a twinning induced plasticity steel10.1016/j.scriptamat.2018.03.017 ↗
44. In-situ neutron diffraction study on the tension-compression fatigue behavior of a twinning induced plasticity steel10.1016/j.scriptamat.2017.04.041 ↗
45. Portevin-Le Chatelier effect, twinning-detwinning and disordering in an aged Ni–Cr–Mo alloy during large plastic deformation10.1016/j.msea.2020.140506 ↗
46. Mechanism of ortho kink-band formation in compressed zinc monocrystals10.1007/BF03398884 ↗
47. Is there a critical resolved shear stress for twinning in face-centred cubic crystals?10.1080/14786430310001612175 ↗
48. Slip versus twinning in low and very low stacking-fault energy Cu-Al alloy single crystals10.1016/j.actamat.2017.05.011 ↗
49. Direct measurements of stacking-fault energies from observations of dislocation nodes10.1080/14786436108243372 ↗
50. Glide dislocations on cube planes in a low Stacking-fault energy alloy10.1002/pssa.2210750224 ↗
51. On the behavior of mechanical twinning in Cu-Al single crystals10.1016/S0921-5093(97)00298-0 ↗
52. A theory of unstable glide in the presence of a dense dislocation forest10.1016/0001-6160(71)90084-8 ↗