High compressive property of precipitation-hardened Fe75(CoCrMnNi)25 (at.%) medium-entropy alloy
Source abstract
Abstract
Abstract Precipitation-hardening behavior caused by aging treatment in Fe75(CoCrMnNi)25 (at.%) medium-entropy alloy (MEA) was investigated. The applied aging treatment, which was based on the heat treatment principle of maraging steel, successfully introduced nano precipitates in this MEA system. The X-ray diffraction revealed that the cold-rolled, recrystallized, and aged specimens contain a body-centered cubic (BCC) phase matrix. Furthermore, electron backscattered diffraction and transmission electron microscopy (TEM) showed the presence of lath martensite in the aged specimen. TEM and atom probe tomography revealed the formation of ellipsoidal B2-ordered Ni–Mn nano precipitates with size 3 nm, which exhibit a coherent relationship with the matrix. The combination of the BCC phase matrix, lath martensite, and coherent B2 nano precipitates led to a high hardness, compressive yield strength, and ultimate compressive strength of 578 HV, 1773 MPa, and 2525 MPa, respectively.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Advanced Materials Characterization Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. The effect of a two-stage heat-treatment on the microstructural and mechanical properties of a maraging steel10.3390/ma10121346 ↗
2. Precipitation in 9Ni-12Cr-2Cu maraging steels10.1016/S1359-6454(98)00267-5 ↗
3. Precipitation in 18 wt% Ni maraging steel of grade 35010.1016/S1359-6454(99)00370-5 ↗
4. Recent studies of the laser cladding of high entropy alloys10.5781/JWJ.2017.35.4.9 ↗
5. Effect of heat treatments on welding residual stresses of 18% Ni
6. A critical review of high entropy alloys and related concepts10.1016/j.actamat.2016.08.081 ↗
7. Alloy design strategies and future trends in high-entropy alloys10.1007/s11837-013-0761-6 ↗
8. Structure and mechanical properties of FeAlCrV and FeAlCrMo medium-entropy alloys10.1016/j.msea.2018.04.062 ↗
9. Age hardening and re-crystallization softening of a CoCrFeMnNi high entropy alloy
10. Friction stress and Hall-Petch relationship in CoCrNi equi-atomic medium entropy alloy processed by severe plastic deformation and subsequent annealing10.1016/j.scriptamat.2017.02.042 ↗
11. Understanding the mechanical behaviour and the large strength/ductility differences between FCC and BCC AlxCoCrFeNi high entropy alloys10.1016/j.jallcom.2017.08.067 ↗
12. Compressive deformation behavior of CrMnFeCoNi high-entropy alloy10.1007/s12540-016-6304-2 ↗
13. Recent progress in high-entropy alloys10.3166/acsm.31.633-648 ↗
14. A novel Fe20Co20Ni41Al19 eutectic high entropy alloy with excellent tensile properties10.1016/j.matlet.2018.01.017 ↗
15. Cooling rate effect on microstructure and mechanical properties of AlxCoCrFeNi high entropy alloys10.1016/j.matdes.2017.07.008 ↗
16. Multicomponent and high entropy alloys10.3390/e16094749 ↗
17. Microstructural development in equiatomic multicomponent alloys10.1016/j.msea.2003.10.257 ↗
18. Microstructure and mechanical properties of as-cast CoCrFeMnNi high entropy alloy
19. Tensile properties and serrated flow behavior of as-cast CoCrFeMnNi high-entropy alloy at room and elevated temperatures10.1007/s12540-018-0200-x ↗
20. Synergistic effect by Al addition in improving mechanical performance of CoCrNi medium-entropy alloy10.1016/j.jallcom.2019.06.005 ↗
21. Experimental investigation and phase diagram of CoCrMnNi–Fe system bridging high-entropy alloys and high-alloyed steels10.1016/j.jallcom.2019.01.134 ↗
22. The morphology and crystallography of lath martensite in alloy steels10.1016/j.actamat.2006.07.009 ↗
23. Precipitation in 300 grade maraging steel built by selective laser melting: aging at 510 °C for 2 h10.1016/j.matchar.2019.02.033 ↗
24. Structure of the high-entropy alloy AlxCrFeCoNi: fcc versus bcc10.1016/j.jallcom.2017.04.318 ↗
25. Aging characteristics and mechanical properties of 1600 MPa body-centered cubic Cu and B2-NiAl precipitation-strengthened ferritic steel10.1016/j.actamat.2014.03.051 ↗
26. Strength–ductility balance in an ultrafine-grained non-equiatomic Fe50(CoCrMnNi)50 medium-entropy alloy with a fully recrystallized microstructure10.1016/j.jallcom.2018.11.265 ↗
27. The deformation and ageing of mild steel: III discussions of results10.1088/0370-1301/64/9/303 ↗
28. Application of the Hall‐Petch relation to microhardness measurements on Al, Cu, Al‐MD 105, and Al‐Cu alloys10.1002/pssa.2211190207 ↗
29. Origin of double-peak precipitation hardening in metallic alloys10.1016/j.ijplas.2018.07.016 ↗
30. Effect of the over-ageing treatment on the mechanical properties of AA2024 aluminum alloy
31. The BCC/B2 morphologies in AlxNiCoFeCr high-entropy alloys10.3390/met7020057 ↗
32. Lath formation mechanisms and twinning as lath martensite substructures in an ultra low-carbon iron alloy10.1038/s41598-018-32679-6 ↗
33. Ultrastrong steel via minimal lattice misfit and high-density nanoprecipitation10.1038/nature22032 ↗
34. Synergic strengthening by oxide and coherent precipitate dispersions in high-entropy alloy prepared by powder metallurgy10.1016/j.scriptamat.2018.07.034 ↗
35. High-temperature strengthening mechanisms of Laves and B2 precipitates in a novel ferritic alloy10.1016/j.msea.2018.02.013 ↗
36. A model for coherency strengthening of large precipitates10.1016/j.scriptamat.2014.04.019 ↗
37. Analysis of three-dimensional atom-probe data by the proximity histogram, microsc
38. Classification of Bulk metallic glasses by atomic size difference, heat of mixing and Period of constituent elements and its application to characterization of the main alloying element10.2320/matertrans.46.2817 ↗
39. Thermodynamic stability and diffusivity of near-equiatomic Ni-Mn alloys10.1063/1.1450042 ↗
40. A novel quaternary equiatomic Ti-Zr-Nb-Ta medium entropy alloy (MEA)10.1016/j.intermet.2018.07.008 ↗
41. Microstructure and room temperature properties of a high-entropy TaNbHfZrTi alloy10.1016/j.jallcom.2011.02.171 ↗
42. A hierarchical nanostructured Fe34Cr34Ni14Al14Co4 high-entropy alloy with good compressive mechanical properties10.1016/j.msea.2018.01.034 ↗
43. Microstructure and properties of novel CoCrFeNiTaxeutectic high-entropy alloys10.1016/j.jallcom.2017.11.075 ↗
44. Novel high entropy alloys of Fe x Co 1-x NiMnGa with excellent soft magnetic properties10.1016/j.intermet.2018.05.014 ↗
45. Effect of Co content on the mechanical properties of A2 and B2 phases in AlCoxCrFeNi high-entropy alloys10.1016/j.jallcom.2018.07.346 ↗
46. Strengthening FCC-CoCrFeMnNi high entropy alloys by Mo addition10.1016/j.jmst.2018.10.009 ↗
47. Effect of alloying elements on microstructure, mechanical and damping properties of Cr-Mn-Fe-V-Cu high-entropy alloys10.1016/j.jmst.2018.02.026 ↗