The impact of periodic distribution of alloying elements during tempering in a multistep partitioned manganese steels on mechanical behavior: Experiments, simulation and analysis
Source abstract
Abstract
Abstract Restricting carbide formation during tempering is desired from the perspective of high stability of retained austenite in steels. A periodic distribution of high Mn-low Al and low Mn-high Al region was induced in a multi-step partitioning (MSP) quenching process, providing a new pathway to control the precipitation behavior during tempering, which has a broad scope in the microstructural design of steels. The MSP process involved innovative combination of intercritical annealing, flash process and tempering in the endeavor to obtain high strength-high ductility combination (yield strength ~ 694 MPa, tensile strength ~ 1078 MPa). The presence of retained austenite in MSP quenched steel, benefited from high Mn-concentration and led to partitioning of carbon from martensite to retained austenite during the early stage of tempering. High Al-content in the martensite region restricted the nucleation of carbides and promoted partitioning of carbon. During tempering, the growth of carbides in martensite in MSP quenched steel was governed by the competition of carbon between carbides and retained austenite, which led to rapid coarsening of carbides as compared to the conventional quenched steel. The periodic distribution of Mn and Al, which led to heterogeneous stability of retained austenite, led to unique TRIP effect in the MSP quenched and tempered steel, and characterized by high work hardening rate during the early stage of deformation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Magnetic Properties and Applications · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (19)
Show source-provided references
1. Experimental and numerical analysis on formation of stable austenite during the intercritical annealing of 5Mn steel10.1016/j.actamat.2011.03.025 ↗
2. High strength low-carbon alloyed steel with good ductility by combining the retained austenite and nano-sized precipitates10.1016/j.msea.2013.06.022 ↗
3. High dislocation density–induced large ductility in deformed and partitioned steels10.1126/science.aan0177 ↗
4. Quenching and partitioning martensite—a novel steel heat treatment10.1016/j.msea.2006.02.133 ↗
5. Mechanical properties and retained austenite in intercritically heat-treated bainite-transformed steel and their variation with Si and Mn additions10.1007/BF02656816 ↗
6. Austenite stabilization through manganese enrichment10.1016/j.scriptamat.2010.09.040 ↗
7. Effect of fresh martensite on the stability of retained austenite in quenching and partitioning steel10.1016/j.msea.2014.07.054 ↗
8. Carbon partitioning during quenching and partitioning heat treatment accompanied by carbide precipitation10.1016/j.actamat.2014.11.049 ↗
9. Strengthening and toughening mechanisms of quenching–partitioning–tempering (Q–P–T) steels
10. Application of the quenching and partitioning (Q&P) process to a medium-carbon, high-Si microalloyed bar steel10.4028/www.scientific.net/MSF.426-432.1089 ↗
11. Precipitation of carbides in low-carbon Fe-AI-C alloys10.1007/BF02646383 ↗
12. The kinetics of carbide precipitation in silicon-aluminum steels10.1007/BF02650109 ↗
13. Nozzle clogging behaviour of Ti-bearing Al-killed ultra low carbon steel10.2355/isijinternational.44.1653 ↗
14. Fracture toughness of two experimental high-strength bainitic low-alloy steels containing silicon10.1179/mst.1987.3.6.441 ↗
15. Carbon partitioning to austenite from martensite or bainite during the quench and partition (Q&P) process: a critical assessment10.1016/j.actamat.2007.08.051 ↗
16. The significance of multi-step partitioning: processing-structure-property relationship in governing high strength-high ductility combination in medium-manganese steels10.1016/j.actamat.2016.10.067 ↗
17. Strain hardening behavior of dual-phase steels10.1007/s11661-009-9975-1 ↗
18. Tensile behaviors and deformation mechanism of a medium Mn-TRIP steel at different temperatures10.1016/j.msea.2016.11.017 ↗
19. Phase transformation and mechanical properties of Si-free CMnAl transformation-induced plasticity-aided steel10.1007/s11661-002-0378-9 ↗