Effect of boron addition on microstructure and tensile properties of copper modified ultra high strength NiSiCrCoMo steel
Source abstract
Abstract
Abstract Effect of boron addition on microstructure and tensile properties of a copper modified ultra high strength low alloy NiSiCrCoMo steel is investigated in the present study. Base, Cu and Cu + B modified steels were austenitised and quenched, followed by tempering in the temperature range of 200–750 °C. The effect of tempering temperature on tensile properties along with detailed microstructural changes has been evaluated for these steels at tempering temperatures of 200 °C, 650 °C and 750 °C. Boron addition results in delayed recovery of laths and finer lath structure at higher tempering than that due to only Cu addition in base steel. This contributes for higher strain hardening in boron modified steel at high tempering temperature. A compensating effect in strength has been noticed in Cu modified steel; increase in strength due to presence of precipitates is nullified by the formation of equiaxed polygonal ferrite in this steel.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. Effect of boron addition on structure and properties of low carbon bainitic steels10.2355/isijinternational.42.Suppl_S38 ↗
2. Determination of the critical conditions for the initiation of dynamic recrystallization in boron microalloyed steels10.1016/j.msea.2011.01.102 ↗
3. Structure-properties relationships in boron steels
4. Effect of boron on the strength and toughness of direct-quenched low-carbon niobium bearing ultra-high strength martensitic steel10.1007/s11661-017-4295-3 ↗
5. Influence of boron on the decomposition of austenite in low carbon alloyed steels10.1007/BF02667283 ↗
6. Boron effects on the ductility of a nano clustered-strengthened ferritic steel10.1016/j.msea.2010.10.058 ↗
7. Boron in HSLA steels: potentialities, state of the art and prospects
8. Effect of boron addition and initial heat-treatment temperature on microstructure and mechanical properties of modified 9Cr-1Mo steels under different heat-treatment conditions10.1007/s11661-012-1584-8 ↗
9. Influence of boron on strain hardening behaviour and ductility of low carbon hot rolled steel10.1016/j.msea.2011.06.030 ↗
10. Effects of Cu and B addition on microstructure and mechanical properties of high-strength bainitic steels10.1016/j.msea.2009.03.052 ↗
11. Ultrahigh-strength low-alloy steels with enhanced fracture toughness10.1016/S0079-6425(97)00016-9 ↗
12. Development of an ultra-high strength low-alloy NiSiCrCoMo steel10.1007/BF02747636 ↗
13. Effect of copper addition on microstructure and mechanical properties of ultra high strength NiSiCrCoMo steel10.1016/j.msea.2015.10.129 ↗
14. The effect of silicon and nickel additions on the sulfide spacing and fracture toughness of a 0.4 carbon low alloy steel10.1007/BF02643986 ↗
15. Development of an ultra high strength low alloy steel for armour applications10.1179/026708309X12560332736476 ↗
16. Martensite in steel: strength and structure10.1016/S0921-5093(99)00288-9 ↗
17. Martin · 1998
18. Precipitation hardening10.1016/0079-6425(63)90010-0 ↗
19. Enhanced nucleation of polygonal ferrite grain in the interior of austenite grain in boron bearing steel
20. Tensile deformation