journal article·2019-01

Thermomechanical behavior of amorphous alloys based on titanium at the temperature range of the glass transition and crystallization

A. Sypien, G. Garzel, T. Czeppe

Publisher page

Abstract

Abstract Knowledge and systematic research on the mechanical properties of amorphous materials in the transition temperature range from amorphous to crystalline is a fundamental scientific interest. Planning the use of these materials must be based on thermomechanical properties information. TiZrCuPd amorphous alloys belong to the potentially lead-free solders of relatively large glass forming ability. The paper presents results of the differential scanning calorimetry, thermomechanical, microstructural and phase analysis of the TiZrCuPd amorphous alloys containing 14 at% Pd and 2 and 3 at% Sn additions at the expenses of Cu content. The samples were investigated in the tensile-load modulated and dilatometric modes in the temperature range of the glass transition and crystallization. The relation between two steps of crystallization process, plastic flow and resulting ability for the deformation was analyzed and related to the microstructure and phase analysis. The determined temperature range of glass transition and primary crystallization show enhanced ductility in the dependence on the Sn additions and homogeneous deformation in this range. The engineering strain of alloys reveals its dependence on the temperature, especially visible in the sample for the 2 at% Sn additive.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallic Glasses and Amorphous Alloys · Glass properties and applications · Phase-change materials and chalcogenides

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. The development of high strength brazing technique for Ti-6Al-4V using TiZrCuNi amorphous filler10.1016/j.matchar.2017.07.039 ↗
2. Infrared brazing of Ti50Al50 and Ti-6Al-4V using two Ti-based filler metals10.1016/j.intermet.2008.06.007 ↗
3. A multicomponent TiZr-based amorphous brazing filler metal for high-strength joining of titanium alloy10.1016/j.scriptamat.2016.02.006 ↗
4. Induction brazing of Ti-6Al-4V alloy with amorphous 25Ti-25Zr-50Cu brazing filler metal10.1016/0921-5093(95)09885-2 ↗
5. Niech · 2008 · 161
6. Glass-forming ability and mechanical properties of Ti-based bulk glassy alloys with large diameters of up to 1 cm10.1016/j.intermet.2008.05.006 ↗
7. A new Ti-based bulk glassy alloy with potential for biomedical application10.1016/j.msea.2007.01.044 ↗
8. New TiZrCuPd quaternary bulk glassy alloys with potential of biomedical applications10.2320/matertrans.MRA2007086 ↗
9. Recent development and applications of bulk glassy alloys10.1111/j.2041-1294.2010.00019.x ↗
10. Metallic glasses as structural materials10.1016/j.scriptamat.2005.09.051 ↗
11. Shear bands in metallic glasses10.1016/j.mser.2013.04.001 ↗
12. Mechanical behavior of amorphous alloys10.1016/j.actamat.2007.01.052 ↗
13. Glass-forming ability and competitive crystalline phases for lightweight Ti-Be-based alloys10.1007/s11661-009-0122-9 ↗
14. Effect of minor Sn additions on the formation and properties of TiCuZrPd bulk glassy alloy10.2320/matertrans.M2011281 ↗
15. Thermo-mechanical cyclic transformation behavior of Ti-Ni shape memory alloy wire10.1016/j.msea.2009.02.041 ↗
16. A microscopic mechanism for steady state inhomogeneous flow in metallic glasses10.1016/0001-6160(77)90232-2 ↗
17. In situ phase separation flow behavior in the glass transition region10.1016/j.intermet.2010.03.018 ↗
18. Thermomechanical characterization of Cu47,5Zr47,5Al5 bulk metallic glass within the homogeneous flow regime10.1016/j.intermet.2008.09.011 ↗
19. Thermo-mechanical study of rapidly solidified amorphous alloys Al85Ni5Co2RE810.1016/j.jallcom.2012.06.095 ↗
20. Thermal stability and mechanical properties of the TiCuZrPd BMG's with 10, 14 and 20 at% Pd10.1016/j.jallcom.2013.12.240 ↗
21. Influence of the Sn and Nb additions on the crystallization and microhardness of the TiCuZr14at%Pd amorphous alloy10.1007/s11665-016-1898-6 ↗
22. Structural relaxation in amorphous Pd40Ni40P2010.1016/0956-7151(92)90017-9 ↗
23. The glass transition as a free volume related kinetic phenomenon10.1016/0956-7151(90)90142-4 ↗
24. The calorimetric glass transition of amorphous Pd40Ni40P2010.1016/0956-7151(94)00450-V ↗
25. Correlation between enthalpy change and free volume reduction during structural relaxation of Zr55Cu30Al10Ni5 metallic glass10.1016/j.scriptamat.2003.09.038 ↗
26. Preparation of the phase TiNiFe by the levitation and its structural characterization10.1179/174328409X422257 ↗
27. Russew · 2016
28. Plasticity in small-sized metallic systems: intrinsic versus extrinsic size effect10.1016/j.pmatsci.2011.01.005 ↗
29. Impact of deformation on the atomic structures and dynamics of a Cu-Zr metallic glass: a molecular dynamics study10.1103/PhysRevB.90.174101 ↗
30. Extended defects, ideal strength and actual strengths of finite-sized metallic glasses10.1016/j.actamat.2014.03.068 ↗
31. Deformation of metallic glasses: recent developments in theory, simulations, and experiments10.1016/j.actamat.2016.01.049 ↗
32. The mechanical relaxations of a Mn55Al25Ni10Cu10 amorphous alloy studied by dynamic mechanical analysis10.1016/S0921-5093(04)00858-5 ↗
33. Nowick · 1972
34. Dynamic mechanical properties in a Zr46.8Ti13.8Cu12.5Ni10Be27.5 bulk metallic glass10.1016/j.jallcom.2004.08.098 ↗