The effect of reheat treatments on recovering the creep behavior of a corrosion-resistant nickel-based superalloy
Source abstract
Abstract
Abstract The present work is an attempt to possibly obtain the most suitable reheat treatment, which could provide the optimal microstructural characteristics for creep-exposed superalloys. After creep at 850 °C/350 MPa for 96 h and 140 h a cast nickel-based superalloy was reheat-treated with different programs, and then the specimens were subjected to creep again at the same condition. Creep tests indicate that during reheat treatment applying aging at lower temperature, 850 °C, for proper time (4 h) before aging at 1050 °C rather than a repeated standard heat treatment is beneficial to restore creep life. Creep-induced changes in the microstructure, such as excessive grain-boundary secondary M 23 C 6 and/or M 6 C carbides formation, and primary MC carbides decomposition, are noticeably more advanced in the reheat-treated alloys. A quantitative study on the dissolution of σ phases and the formation of cavitations is presented. After the interrupted creep, the γ ′ particles at dendrite cores remained cubic-shaped. However, the rafting of cuboidal γ ′ precipitates was observed in the same creep condition by the reheat treatment programs. Design of a reheat treatment for recovering the creep properties should emphasize the promotion of ductility rather than strength of the alloy. An equation based on the continuum damage-mechanics theory, was suggested to evaluate the remaining creep life.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Temperature Alloys and Creep · Intermetallics and Advanced Alloy Properties · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. Zhang · 2004 · 189
2. Nabarro · 1995
3. Baldan · J. Mater. Sci. · 1991 · 26 · 340910.1007/BF00557126 ↗
4. J. Liburdi, P. Lowden, D.R. Nagy, T. Rusan, S. Shaw, ASME Paper no. GT2009-59444
5. Daleo · J. Eng. Gas Turbines Power · 2002 · 124 · 57110.1115/1.1455638 ↗
6. Safari · J. Mater. Process. Tech. · 2006 · 76 · 24010.1016/j.jmatprotec.2006.03.165 ↗
7. Hou · Mater. Sci. Eng. A · 2004 · 374 · 32710.1016/j.msea.2004.03.005 ↗
8. Hou · Mater. Sci. Eng. A · 2008 · 498 · 34910.1016/j.msea.2008.08.005 ↗
9. Hou · Z. Metallkd · 2006 · 97 · 17410.3139/146.101222 ↗
10. Flemings · 1974
11. 1992
12. Zheng · J. Aeronaut. Mater. · 2006 · 26 · 25
13. He · Mater. Sci. Eng. A · 2005 · 397 · 29710.1016/j.msea.2005.02.038 ↗
14. Henderson · Scripta Metall. Mater. · 1999 · 40 · 22910.1016/S1359-6462(98)00348-0 ↗
15. Miura · ISIJ Int. · 2011 · 51 · 66310.2355/isijinternational.51.663 ↗
16. Zhao · Mater. Sci. Eng. A · 2003 · 355 · 9610.1016/S0921-5093(03)00051-0 ↗
17. Dong · Mater. Sci. Eng. A · 2002 · 328 · 810.1016/S0921-5093(01)01491-5 ↗
18. Tian · Mater. Sci. Eng. A · 2000 · 279 · 16010.1016/S0921-5093(99)00623-1 ↗
19. Ratel · Scripta Mater. · 2008 · 59 · 116710.1016/j.scriptamat.2008.07.031 ↗
20. Epishin · Acta. Mater. · 2000 · 16 · 416910.1016/S1359-6454(00)00197-X ↗
21. Gabrisch · Philos. Mag. A · 1996 · 74 · 22910.1080/01418619608239699 ↗
22. Tetzlaff · 2000 · 273
23. Madeleine · 1997
24. Sajjadi · Mater. Sci. Eng. A · 2002 · 325 · 48410.1016/S0921-5093(01)01709-9 ↗
25. Reed · 2006
26. Nabarro · 1995
27. Masakazu Saito · Scripta Mater. · 1996 · 34 · 118910.1016/1359-6462(95)00636-2 ↗
28. Baldan · J. Mater. Sci. · 2002 · 37 · 237910.1023/A:1015408116016 ↗
29. Rowland · 2004 · 697
30. Epishin · 2004 · 537
31. Reed · Mater. Sci. Technol. · 2007 · 23 · 89310.1179/174328407X192723 ↗
32. Cheng · Mater. Charact. · 2009 · 60 · 21010.1016/j.matchar.2008.09.002 ↗
33. Robinson · Trans. ASME · 1952 · 74 · 777
34. Raghavan · Mech. Mater · 2005 · 37 · 955
35. Monkman · Proc. Am. Soc. Test. Mater. · 1956 · 56 · 593