journal article·2016-10

Enhanced mechanical properties and structure stability induced by Si in Ti–8.5Al–1.5Mo alloys

X. Wang, L. Wang, Q.J. Wang, Y.D. Wu, J.J. Si, X.D. Hui

Publisher page

Abstract

Abstract The crystalline microstructures, mechanical properties and structural stability of Ti-8.5Al-1.5Mo-xSi (wt%, x=0%, 0.2%, 0.4%, and 0.6%) alloys were comprehensively investigated. It is shown that with the addition of certain amount of Si, Widmanstatten microstructure was refined and high density of dislocation lines was accumulated in β film and at the grain boundaries between α and β phase. The addition of 0.2% and 0.4% Si induced suppression of the transformations of α→α2, α2→α and α→β in heating process and slow-down of the coarsening tendency of Widmanstatten microstructure during the annealing process. It has been found that the addition of Si results in enhanced tensile mechanical properties and overcomes the strength-ductility trade-off, e. g. the fracture strength and elongation of the alloy with 0.2% Si were increased by 10.5% and 68.5%, respectively, as compared with those of Si free alloy. The strengthening and toughening mechanism are attributed to the solid solution strengthening of Si in α and β phase, the grain boundary and Cottrel atmosphere strengthening, and remaining β phase induced toughening.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Titanium Alloys Microstructure and Properties · Intermetallics and Advanced Alloy Properties · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. Effect of longterm aging on the microstructural stability and mechanical properties of Ti-6Al-2Cr-2Mo-2Sn-2Zr alloy10.1016/S0921-5093(02)00448-3 ↗
2. An overview on the use of titanium in the aerospace industry10.1016/0921-5093(96)10233-1 ↗
3. Synthesis, properties and applications of titanium aluminides10.1007/BF02403806 ↗
4. Correlation between microstructure and creep behavior of the high temperature Ti alloy IMI 834
5. Thermomechanical fatigue behavior of the high temperature titanium alloy IMI 83410.1007/s11661-998-0207-x ↗
6. Hot working behavior of near-α alloy IMI83410.1016/j.msea.2004.12.005 ↗
7. High temperature deformation behavior of a near alpha Ti600 titanium alloy10.1016/S0921-5093(97)00783-1 ↗
8. Characteristics of microstructures and second-phase particles in Y-bearing Ti-1100 alloy10.1016/S0921-5093(01)01362-4 ↗
9. The effect of heat treatment on microstructure and properties of BT36 high temperature alloy
10. Performance of alloyed uncoated and CVD-coated carbide tools in dry milling of titanium alloy Ti-6242S10.1016/j.jmatprotec.2006.03.135 ↗
11. High-temperature deformation behavior of Ti60 titanium alloy10.1016/j.msea.2011.01.113 ↗
12. Huang · 2012
13. A high strength and elastic carbon containing near-α Ti alloy prepared by hot isostatic pressing process10.1016/j.msea.2015.10.093 ↗
14. Textural changes during β→α and α→β→α transformations in a near-α titanium alloy10.1007/s11661-004-0017-8 ↗
15. Tensile behavior at 700°C in Ti–Al–Sn–Zr–Mo–Nb–W–Si alloy with a bi-modal microstructure10.1016/j.msea.2013.11.096 ↗
16. Rosenberg · 1970
17. Effects of Al and Mo on mechanical properties of cast titanium alloys
18. Microstructure evolution in TiAl alloyed with Si10.1016/1359-6462(96)00144-3 ↗
19. Boyer · 1994
20. Effect of Zr and Si addition on high temperature mechanical properties of near-α Ti–Al–Zr–Sn based alloys10.1016/j.msea.2014.06.078 ↗
21. High temperature properties of Ti-6Al-2Sn-4Zr-2Mo-0.09Si
22. Seagle · 1970 · 1001
23. The mechanism of grain refinement of titanium by silicon10.1016/j.scriptamat.2008.01.041 ↗
24. Fentiman · 1970
25. The influence of si content on the microstructure and properties of high temperature titanium alloy