journal article·2016-07

Stress induced phase transition on the medium-high carbon alloy steel hardfacing coating during the work hardening process: Experiments and first-principles calculation

Jian Yang, Caixia Wang, Xiaolei Xing, Yulin Yang, Xuejun Ren, Qingxiang Yang

Publisher page

Abstract

Abstract The stress induced phase transition on the medium-high carbon alloy steel hardfacing coating during the work hardening process was studied by experiments and first-principles calculation. The experimental results show that, the hardness of the specimens tempered for 2 h and 8 h at 480 °C before fatigue cycle are HRC 50.3 and HRC 50.1. The amounts of the retained austenite are 26.7 vt% and 7.3 vt%, respectively. With increase of the fatigue cycle, the amounts of the retained austenite in the tempered specimens decrease while their hardness increase constantly, until the amount of the retained austenite is decreased to 4.9 vt%. After fatigue cycle, the increments of the martensite grains with [001] and [101] orientations are much more than those with other orientations, which indicates that, during the work hardening process, the austenite grain transforms to the [001] and [101] oriented martensite grain preferentially. The calculated results show that, when pressure is 0 GPa, the face-centered cubic austenite supercell is stable, while the body-centered tetragonal martensite supercell is unstable. With increase of the pressure, the stabilities of the austenite and the martensite both increase gradually. When the pressure is larger than 18 GPa, the martensite is more stable than the austenite. For the austenite supercell, the stable limit pressure is 39 GPa. The critical pressure of the stress-induced phase transition is 36 GPa.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal Alloys Wear and Properties · Advanced materials and composites · High-Temperature Coating Behaviors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. Premature failure analysis of forged cold back-up roll in a continuous tandem mill10.1016/j.matdes.2011.03.078 ↗
2. Scanning tunneling microscopy study of wear induced by false brinelling on rolling bearings10.1016/S0169-4332(96)00571-5 ↗
3. Influence of roll profile configuration on high-strength strip flatness control performance in tandem cold rolling10.4028/www.scientific.net/AMR.145.210 ↗
4. Effect of molybdenum on the microstructure and wear resistance of Fe-based hardfacing coatings10.1016/j.msea.2007.12.020 ↗
5. Effect of carbide degradation in a Ni-based hardfacing under abrasive and combined impact/abrasive conditions10.1016/j.surfcoat.2011.07.064 ↗
6. Microstructure and wear properties of Fe-15Cr-2.5Ti-2C-XB wt% hardfacing alloys10.1016/j.apsusc.2013.01.169 ↗
7. Microstructural and mechanical properties evolutions of plasma transferred arc deposited Norem02 hardfacing alloy at high temperature10.1016/j.msea.2011.02.077 ↗
8. The effect of heat treatment and carbon content on the work hardening characteristics of several steels
9. Reversible work hardening in alloys of cubic metals10.1016/0001-6160(65)90145-8 ↗
10. A unified phenomenological description of work hardening and creep based on one-parameter models10.1016/0001-6160(84)90202-5 ↗
11. Work-hardening/softening behaviour of bcc polycrystals during changing strain paths: I. An integrated model based on substructure and texture evolution, and its prediction of the stress-strain behaviour of an IF steel during two-stage strain paths10.1016/S1359-6454(01)00066-0 ↗
12. On the relationship between the twin internal structure and the work-hardening rate of TWIP steels10.1016/j.scriptamat.2010.07.016 ↗
13. Work hardening associated with ɛ-martensitic transformation, deformation twinning and dynamic strain aging in Fe-17Mn-0.6C and Fe-17Mn-0.8C TWIP steels10.1016/j.msea.2011.06.011 ↗
14. Ab initio molecular dynamics for liquid metals10.1103/PhysRevB.47.558 ↗
15. Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set10.1103/PhysRevB.54.11169 ↗
16. Theory of indirect nuclear-spin interactions in lead10.1103/PhysRevLett.21.1796 ↗
17. From ultrasoft pseudopotentials to the projector augmented-wave method10.1103/PhysRevB.59.1758 ↗
18. Ground state of the electron gas by a stochastic method10.1103/PhysRevLett.45.566 ↗
19. Self-interaction correction to density-functional approximations for many-electron systems10.1103/PhysRevB.23.5048 ↗
20. Efficient pseudopotentials for plane-wave calculations10.1103/PhysRevB.43.1993 ↗
21. Special points for Brillouin-zone integrations10.1103/PhysRevB.13.5188 ↗
22. Amount of retained austenite at room temperature after reverse transformation of martensite to austenite in an Fe-13%Cr-7%Ni-3%Si martensitic stainless steel10.1016/S1359-6462(01)01093-4 ↗
23. Estimation of the amount of retained austenite in austempered ductile irons using neural networks10.1016/S0921-5093(01)00913-3 ↗
24. Formation and stability of self-assembled coherent islands in highly mismatched heteroepitaxy10.1103/PhysRevLett.82.4042 ↗
26. Strain fluctuations and elastic constants10.1063/1.443248 ↗
27. Elastic constants of compression-annealed pyrolytic graphite10.1063/1.1659428 ↗
28. Hydrogen-bond patterns in liquid water10.1021/ja00805a003 ↗
29. Koch · 1984