journal article·2009-08

Residual stresses generated during joining of dissimilar alumina–zirconia composites by plastic deformation and its implications on mechanical properties

C. Lorenzo-Martin, D. Singh, J. Routbort, G. Chen

Materials Science and Engineering: A· Volume 517· Issue 1-2
Publisher page

Abstract

Abstract Ceramic bars of zirconia toughened–alumina composites were fabricated by pressureless sintering in air at 1450 °C for 4 h. Composite samples were fabricated with two different compositions: zirconia with 60 vol.% alumina (ZT60A) and zirconia with 40 vol.% alumina (ZT40A). Average four-point-bend strengths for the ZT40A and ZT60A were 480 ± 45 MPa and 410 ± 120 MPa, respectively. Three-layered sandwich structures were fabricated by joining two bars of sintered ZT60A with a sintered ZT40A bar. High-temperature plastic joining was accomplished at 1350 °C at a strain rate of 5 × 10−6 s−1 and a compressive stress ranging from 30–40 MPa. Bend tests conducted on the layered structure exhibited average strengths of 707 ± 81 MPa. Strength enhancements for the multilayered structure were higher than those predicted by stress analysis. Stress enhancements were compared with the residual stresses measured in the layered sample using X-ray micro-diffraction at the Advance Photon Source (APS). Scanning electron microscopy (SEM) was also conducted to identify the location of failure causing flaws.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Advanced materials and composites · MXene and MAX Phase Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (19)

Show source-provided references
1. Schwartz · 1990
2. Messler · 1993
3. Structural ceramics joining II
4. Xie · J. Am. Ceram. Soc. · 2001 · 84 · 47110.1111/j.1151-2916.2001.tb00683.x ↗
5. Gutierrez-Mora · Ceram. Trans. · 2002 · 128 · 252
6. Chaim · J. Mater. Res. · 2000 · 15 · 172410.1557/JMR.2000.0248 ↗
7. Goretta · Mater. Sci. Eng. A · 2008 · 498 · 1210.1016/j.msea.2007.11.149 ↗
8. Nagano · J. Mater. Sci. · 1993 · 28 · 579310.1007/BF00365183 ↗
9. Gutierrez-Mora · Acta Mater. · 2002 · 50 · 347510.1016/S1359-6454(02)00161-1 ↗
10. Gutierrez-Mora · J. Eur. Ceram. Soc. · 2006 · 26 · 96110.1016/j.jeurceramsoc.2004.12.035 ↗
11. Virkar · J. Am. Ceram. Soc. · 1987 · 70 · 16410.1111/j.1151-2916.1987.tb04952.x ↗
12. Pascual · Mater. Sci. Forum · 2005 · 492–493 · 58110.4028/www.scientific.net/MSF.492-493.581 ↗
13. Green · J. Eur. Ceram. Soc. · 1999 · 19 · 251110.1016/S0955-2219(99)00103-X ↗
14. Sergo · J. Am. Ceram. Soc. · 1995 · 78 · 221310.1111/j.1151-2916.1995.tb08639.x ↗
15. Krautkramer · 1983
16. Howard · J. Mater. Sci. · 1991 · 26 · 12710.1007/BF00576042 ↗
17. Hauk · 1997
18. Garvie · Nature · 1975 · 258 · 70310.1038/258703a0 ↗
19. Basu · Int. Mater. Rev. · 2005 · 50 · 23910.1179/174328005X41113 ↗