Surface crack fracture toughness and HRR fields of ultra-high strength steel
Source abstract
Abstract
Abstract In present, due to continuous increasing of the fracture toughness and continuous reduction of steel plate thickness for ultra-high strength steel used in the aerospace solid rocket motor, it is difficult to measure its fracture toughness of surface crack using the linear elastic fracture mechanics method. In this paper, the tensile test was used to achieve the conditional load when the surface crack initiation occurred. Then, the finite element method (FEM) was conducted to calculate the ductile fracture toughness J IC under the conditional load. Lastly, the surface crack fracture toughness, K Ie , can be computed from J IC based on the fracture mechanics method. In addition, the analysis on validity of J -integral showed that K Ie converted from J IC was able to evaluate the fracture toughness of ultra-high strength steel. These are important technical parameters for design of aerospace solid rocket motor.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fatigue and fracture mechanics · High-Velocity Impact and Material Behavior · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (18)
Show source-provided references
1. Thaulow · Eng. Fract. Mech. · 2004 · 71 · 241710.1016/j.engfracmech.2004.01.003 ↗
2. Hauge · Mater. Eng. · 1997 · 257
3. Beremin · Metall. Trans. A · 1983 · 14 · 227710.1007/BF02663302 ↗
4. F. Minami, K. Arimochi, Constraint correction of fracture toughness CTOD for fracture performance evaluation of structural components, ASTM Special Technical Publication, No. 1429, 2002, pp. 48–66.
5. Toyoda · 2001 · 85
6. Minami · Int. J. Fract. · 1992 · 54 · 19710.1007/BF00035355 ↗
7. El-Shennawy · Eng. Fract. Mech. · 1999 · 63 · 44710.1016/S0013-7944(99)00024-7 ↗
8. Dotta · Int. J. Pressure Vessels Piping · 2004 · 81 · 76110.1016/j.ijpvp.2004.04.004 ↗
9. Croavero · Eng. Fract. Mech. · 2005 · 72 · 134410.1016/j.engfracmech.2004.10.010 ↗
10. Cui · Eng. Fract. Mech. · 1980 · 13 · 77510.1016/0013-7944(80)90009-0 ↗
11. Newman · Eng. Fract. Mech. · 1981 · 15 · 85
12. ABAQUS Version 6.5, User's Manual, Hibbitt. Karlsson & Sorensen, Inc., RI, 2005.
13. Kikuchi · Int. J. Fract. · 1992 · 58 · 27310.1007/BF00015620 ↗
14. Kikuchi · Int. J. Press. Vessels Piping · 1995 · 63 · 31510.1016/0308-0161(94)00041-G ↗
15. Sharobeam · Eng. Fract. Mech. · 1999 · 63 · 13110.1016/S0013-7944(99)00017-X ↗
16. Hutchinson · J. Mech. Phys. Solids · 1968 · 16 · 1310.1016/0022-5096(68)90014-8 ↗
17. Rice · J. Mech. Phys. Solids · 1968 · 16 · 110.1016/0022-5096(68)90013-6 ↗
18. Shih · 1983