Quantitative evaluation in hot workability of SUS303 free-cutting steel
Source abstract
Abstract
Abstract The hot forging behavior of S-containing SUS303 free-cutting steel was investigated in detail by carrying out compression tests; the tests were carried out in the temperature range of 1073–1323 K and strain rates ranging from 0.01 to 30 s−1. Quantitative relationships among the Zener–Hollomon parameter Z, dynamic recrystallization (DRX) fraction and power dissipation efficiency were discussed for the first time. The processing map exhibited high reliability in predicting the stable condition of low strain rate and high temperature, while at high strain rate region the reliability is relatively low. At the optimum condition predicted by the processing map, refined and uniaxial microstructure could be obtained, and at the same time the cutting ability was also enhanced greatly due to the re-distribution of MnS precipitates into a more suitable condition for the cutting process.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallurgy and Material Forming · Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (19)
Show source-provided references
1. Jiang · J. Mater. Process. Technol. · 1996 · 58 · 16010.1016/0924-0136(95)02144-2 ↗
2. Hashimura · Nippon Steel Tech. Rep. · 2007 · 386 · 42
3. Sakamoto · Kobe Steel Eng. Rep. · 2006 · 56 · 35
4. Ohtani · J. Appl. Metalworking · 1986 · 4 · 24510.1007/BF02833932 ↗
5. Degarmo · 2003
6. Prasad · 1997
7. Prasad · Int. Mater. Rev. · 1998 · 43 · 24310.1179/imr.1998.43.6.243 ↗
8. Prasad · Metall. Trans. · 1984 · 15A · 188310.1007/BF02664902 ↗
9. Prasad · Metall. Trans. · 1996 · 27A · 23510.1007/BF02647765 ↗
10. Montheillet · Metall. Trans. · 1996 · 27A · 23210.1007/BF02647764 ↗
11. H. Ziegler, in: I.N. Sneddon, R. Hill, (Eds.), Progress in Solid Mechanics, 4, 1965, pp. 91–193.
12. Li · Metall. Trans. A · 2009 · 40A · 98210.1007/s11661-009-9783-7 ↗
13. Li · Metall. Trans. A · 2010 · 51 · 1210
14. Koul · Acta Metall. · 1987 · 35 · 179110.1016/0001-6160(87)90125-8 ↗
15. Li · ISIJ Int. · 2011 · 51 · 78210.2355/isijinternational.51.782 ↗
16. Mataya · Metall. Mater. Trans. A · 1994 · 25 · 272710.1007/BF02649226 ↗
17. Venugopal · Mater. Sci. Eng. · 1994 · A 177 · 14310.1016/0921-5093(94)90486-3 ↗
18. Sivaprasad · J. Mater. Process. Technol. · 2003 · 132 · 26210.1016/S0924-0136(02)00938-X ↗
19. T. Suzuki, Master Thesis, Tohoku University, March 2012.