journal article·2003-03Open access

Fatigue behavior of a high strength steel in vacuum, in air and in 3.5% NaCl solution under cathodic protection

B Huneau, J Mendez

Materials Science and Engineering: A· Volume 345· Issue 1-2

Abstract

Commercially pure copper was joined to a 1050 aluminum alloy by friction stir welding. A specific configuration where the tool pin was fully located in the aluminum plate was chosen. In such a situation, there is no mechanical mixing between the two materials, but frictional heating gives rise to a significant thermally activated interdiffusion at the copper/aluminum interface. This gives rise to the formation of defect-free joints where the bonding is achieved by a very thin intermetallic layer at the Cu/Al interface. Nanoscaled grains within this bonding layer were characterized using transmission electron microscopy (TEM). Two phases were identified, namely, Al2Cu and Al4Cu9 phases. The nucleation and growth of these two phases are discussed and compared to the standard reactive interdiffusion reactions between Cu and Al.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Fatigue and fracture mechanics · Fire effects on concrete materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. Yu · Fatigue Fract. Eng. Mater. Struct. · 1996 · 19 · 101910.1111/j.1460-2695.1996.tb01037.x ↗
2. Corrosion fatigue crack propagation in metals
3. E. Coudert, C. Renaudin, in: P. Grundy, J. Koo, I. Langsen, J.M. Roesset (Eds.), Proceedings of the 8th International Offshore and Polar Engineering Conference, Vol. IV, Montréal, Canada, May 24–29, 1998, International Society of Offshore and Polar Engineers, Golden, CO, 1998, p. 116.
4. Brazy · Mém. Etudes Sci. Rev. Métall. · 1986 · 83 · 35
5. Wang · Fatigue Fract. Eng. Mater. Struct. · 1995 · 18 · 29310.1111/j.1460-2695.1995.tb00876.x ↗
6. Influence de l'environnement
7. Essais de fatigue-corrosion
8. B. Huneau, J. Mendez, to be submitted.
9. Troiano · Trans. ASM · 1960 · 55 · 54
10. Oriani · Berichte Bunseng. Phys. Chem. · 1972 · 76 · 84810.1002/bbpc.19720760864 ↗
11. Oriani · Corrosion · 1987 · 43 · 39010.5006/1.3583875 ↗
12. Beachem · Metall. Trans. · 1972 · 3 · 43710.1007/BF02642048 ↗
13. Birnbaum · Mater. Sci. Eng. · 1994 · A176 · 19110.1016/0921-5093(94)90975-X ↗
14. Tabata · Scripta Metall. · 1983 · 17 · 94710.1016/0036-9748(83)90268-5 ↗
15. Tabata · Scripta Metall. · 1984 · 18 · 23110.1016/0036-9748(84)90513-1 ↗
16. Bastien · CR Acad. Sci. Paris · 1951 · 232 · 1545
17. Dahlberg · Trans. ASM · 1965 · 58 · 46
18. Hénaff · Int. J. Fatigue · 1992 · 14 · 21110.1016/0142-1123(92)90002-T ↗
19. Benoit · Mater. Sci. Eng. · 1980 · 45 · 110.1016/0025-5416(80)90063-4 ↗
20. Orowan · Nature · 1944 · 154 · 34110.1038/154341a0 ↗
21. Petch · Phil. Mag. · 1956 · 1 · 33110.1080/14786435608238106 ↗
22. Lynch · Acta Metall. · 1988 · 36 · 263910.1016/0001-6160(88)90113-7 ↗
23. Wei · Int. J. Fracture · 1981 · 17 · 23510.1007/BF00053522 ↗
24. Hénaff · Physicochem. Mech. Mater. · 1996 · 32 · 69
25. Wei · 1989 · 233
26. D. Ressler, M.S. Thesis, Lehig University, Bethlehem, PA, 1984.
27. J. Mendez, P. Violan, In: R.P. Wei, R.P. Gangloff (Eds.), Proceedings of the Basic Questions in Fatigue Vol. II STP 924, Dallas, TX, 23–24 October, 1984, ASTM, Philadelphia, 1988, p. 196.
28. Mendez · Mater. Sci. Eng. · 1999 · 263 · 18710.1016/S0921-5093(98)01164-2 ↗