Nitrogen versus helium: effects of the choice of the atomizing gas on the structures of Fe50Ni30Si10B10 and Fe32Ni36Ta7Si8B17 powders
Source abstract
Abstract
Gas atomization can produce, besides a possible significant degree of undercooling, high cooling rates, whose extent depends on the size of the droplets, on their velocity with respect to the surrounding medium, on the thermo-physical properties of both the alloy and the gas, and of course on the operating conditions such as melt overheating and gas-to-metal flow ratio. In this respect it is well-known that the atomizing gas can play a significant role in determining both the powder size distribution and the kind and mix of phases which result from the solidification and cooling processes. The microstructures and solidification morphologies of powders obtained from nitrogen and helium sonic gas atomization of two iron-nickel base glass forming alloys, Fe 50 Ni 30 Si 10 B 10 and Fe 32 Ni 36 Ta 7 Si 8 B 17 , were investigated by means of light microscopy, X-ray diffraction (XRD) and differential thermal analysis (DTA). The Fe 32 Ni 36 Ta 7 Si 8 B 17 alloy exhibits a higher proneness to the development of amorphous phase than the Fe 50 Ni 30 Si 10 B 10 alloy, while the effect of the higher speed attainable by the stream of helium with respect to that of nitrogen, affords not only to obtain a larger amount of particles in the finer size ranges, but also to affect the relative amounts of phases within the different size fractions.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallic Glasses and Amorphous Alloys
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (9)
Show source-provided references
1. P. Rizzi, S. Barbero, L. Battezzati, Evidence of Tg from devitrification studies in Ni–Fe–Ta–Si–B amorphous alloys Mater. Sci. Forum, vol. 360–362, Trans Tech Publications, Switzerland, 2001, pp. 499–50410.4028/www.scientific.net/MSF.360-362.499 ↗
2. A nanocrystalline fcc phase via devitrification of a Ni36Fe32Ta7 Si8 B17 amorphous alloy10.1016/S0965-9773(99)00363-3 ↗
3. L. Battezzati, P. Rizzi, S. Romussi, New amorphous and nanocrystalline alloys based on the Ni–Si–B system, pt. 2, Mater. Sci. Forum, vol. 269–272, Trans Tech Publications, Switzerland 1998, pp. 737–742.10.4028/www.scientific.net/MSF.269-272.737 ↗
4. Through ribbon cooling rates and related nanostructures in melt spun Fe/Ni base hyperquenched alloys10.1016/S0921-5093(00)01541-0 ↗
5. Development of solidification microstructures in atomized Fe–Ni alloy droplets
6. A. Lawley, Atomization: the production of metal powders, in: Alan Lawley (Ed.), Metal Powder Industries Federation, Princeton, New Jersey, 1992, p. 79.
7. R.W. Cahn, P. Hasen, E.J. Kramer (Eds.), Materials Science and Technology: Glasses and Amorphous Materials, vol. 9, VCH, Weinheim, 1991, p. 535, ISBN 3-527-26822-7.
8. Morphologies in gas atomized Fe50Ni30Si10B10 amorphizable alloy powders10.1016/S0921-5093(00)01489-1 ↗
9. R.W. Cahn, P. Hasen, E.J. Kramer (Eds.), Materials Science and Technology: Glasses and Amorphous Materials, vol. 9, VCH, Weinheim, 1991, p. 96, ISBN 3-527-26822-7.