journal article·2002-10

The grain size dependency of compressive deformation of a superplastic 3 mol% yttria stabilized tetragonal zirconia

G.Q. Tong, K.C. Chan, L. Gao, Z.R. Lin

Materials Science and Engineering: A· Volume 336· Issue 1-2
Publisher page

Abstract

Abstract The compressive behavior of a medium purity 3 mol% yttria stabilized tetragonal zirconia (3YTZ) was investigated with three different initial grain sizes at the temperature of 1723 K. It was found that the strain rate sensitivity exponent increases from 0.45 to 0.55 when the initial grain size increases from 0.5 to 1.1 μm and that the grain size exponent is about 2.0. Microstructural measurements revealed that grains retained the essentially equiaxed nature even after large plastic strain and that the instantaneous grain size had a linear relationship with true strain at the specified initial strain rates. Transmission electron microscope observation demonstrated that an amorphous phase concentrated at multiple points and that no amorphous phase formed at two-grain boundaries. Like Al 2 O 3 , the SiO 2 content had a significant effect on superplastic 3YTZ characteristics. It is considered that grain boundary sliding (GBS) should play a dominant role in 3YTZ superplasticity and that the presence of an amorphous phase at triple or multiple points could effectively release the stress concentration caused by GBS and thereby facilitate superplastic deformation.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced materials and composites · Advanced ceramic materials synthesis · Nuclear materials and radiation effects

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. Wakai · Adv. Ceram. Mater. · 1986 · 1 · 25910.1111/j.1551-2916.1986.tb00026.x ↗
2. Nieh · Acta Metall. Mater. · 1990 · 38 · 112110.1016/0956-7151(90)90185-J ↗
3. Chen · J. Am. Ceram. Soc. · 1990 · 73 · 258510.1111/j.1151-2916.1990.tb06734.x ↗
4. Chokshi · Mater. Sci. Eng. · 1993 · A166 · 11910.1016/0921-5093(93)90316-7 ↗
5. Ma · Acta Metall. Mater. · 1994 · 42 · 275310.1016/0956-7151(94)90216-X ↗
6. Chokshi · Mater. Sci. Eng. · 1993 · R10 · 23710.1016/0927-796X(93)90009-R ↗
7. Ikuhara · Acta Mater. · 1997 · 45 · 528510.1016/S1359-6454(97)00152-3 ↗
8. Owen · Acta Mater. · 1998 · 46 · 66710.1016/S1359-6454(97)00251-6 ↗
9. Hines · Acta Mater. · 1998 · 46 · 555710.1016/S1359-6454(98)00171-2 ↗
10. Schissler · Acta Metall. Mater. · 1991 · 39 · 322710.1016/0956-7151(91)90057-8 ↗
11. Tong · Mater. Sci. Forum · 1997 · 243–245 · 39310.4028/www.scientific.net/MSF.243-245.393 ↗
12. G.Q. Tong, Ph.D. thesis, Nanjing University of Aeronautics and Astronautics, Nanjing, 1996, pp. 37.
13. Wang · J. Am. Ceram. Soc. · 1984 · 67 · 39910.1111/j.1151-2916.1984.tb19725.x ↗
14. Wakai · Jpn. J. Appl. Phys. Ser. · 1989 · 2 · 57
15. Nauer · 1989 · 3 · 323
16. Carry · 1989 · 7 · 199
17. Maehara · J. Mater. Sci. · 1990 · 25 · 227510.1007/BF00638018 ↗
18. Needleman · Acta Metall. Mater. · 1980 · 28 · 131510.1016/0001-6160(80)90001-2 ↗
19. Kizuka · Mater. Sci. Forum · 1999 · 304–306 · 56110.4028/www.scientific.net/MSF.304-306.561 ↗
20. Kimura · 1984 · 24 · 183
21. Hwang · J. Am. Ceram. Soc. · 1990 · 73 · 1623
22. Kajihara · Scr. Metall. Mater. · 1993 · 28 · 55910.1016/0956-716X(93)90196-Y ↗
23. Hermansson · 1989 · 3 · 329
24. Nieh · J. Am. Ceram. Soc. · 1989 · 72 · 146910.1111/j.1151-2916.1989.tb07678.x ↗
25. Chokshi · Mater. Sci. Technol. · 1991 · 7 · 46910.1179/mst.1991.7.5.469 ↗
26. Oishi · 1983 · 7 · 208