An atomistic simulation of solid state sintering using Monte Carlo methods
Source abstract
Abstract
This paper presents results on the simulation of the solid state sintering of copper wires using Monte Carlo techniques based on elements of lattice theory and cellular automata. The initial structure is superimposed onto a triangular, two-dimensional lattice, where each lattice site corresponds to either an atom or vacancy. The number of vacancies varies with the simulation temperature, while a cluster of vacancies is a pore. To simulate sintering, lattice sites are picked at random and reoriented in terms of an atomistic model governing mass transport. The probability that an atom has sufficient energy to jump to a vacant lattice site is related to the jump frequency, and hence the diffusion coefficient, while the probability that an atomic jump will be accepted is related to the change in energy of the system as a result of the jump, as determined by the change in the number of nearest neighbours. The jump frequency is also used to relate model time, measured in Monte Carlo Steps, to the actual sintering time. The model incorporates bulk, grain boundary and surface diffusion terms and includes vacancy annihilation on the grain boundaries. The predictions of the model were found to be consistent with experimental data, both in terms of the microstructural evolution and in terms of the sintering time. (C) 2002 Elsevier Science B.V. All rights reserved.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Quasicrystal Structures and Properties · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. Srolovitz · Scripta Metallurgica · 1983 · 17 · 24110.1016/0036-9748(83)90106-0 ↗
2. Anderson · Acta Metallurgica · 1984 · 32 · 78310.1016/0001-6160(84)90151-2 ↗
3. Srolovitz · Acta Metallurgica · 1984 · 32 · 79310.1016/0001-6160(84)90152-4 ↗
4. Kunaver · Acta Metallurgica et Materialia · 1989 · 41 · 225510.1016/0956-7151(93)90307-E ↗
5. Srolovitz · Acta Metallurgica · 1833 · 34 · 1986
6. Srolovitz · Acta Metallurgica · 1988 · 36 · 211510.1016/0001-6160(88)90313-6 ↗
7. Humphreys · Materials Science and Technology · 1992 · 8 · 13510.1179/mst.1992.8.2.135 ↗
8. Brown · Materials Science and Technology · 1989 · 5 · 36210.1179/mst.1989.5.4.362 ↗
9. Zhu · Acta Metallurgica et Materialia · 1992 · 40 · 68310.1016/0956-7151(92)90009-4 ↗
10. Rappaz · Acta Metallurgica et Materialia · 1993 · 41 · 34510.1016/0956-7151(93)90065-Z ↗
11. Valle · Acta Metallurgica et Materialia · 1994 · 42 · 299910.1016/0956-7151(94)90396-4 ↗
12. Tikare · Acta Materialia · 1998 · 46 · 133310.1016/S1359-6454(97)00269-3 ↗
13. Tikare · Acta Materialia · 1998 · 46 · 134310.1016/S1359-6454(97)00268-1 ↗
14. Breitkreutz · Metallurgy · 1975 · 29 · 990
15. Hassold · Journal of the American Ceramic Society · 1990 · 73 · 285710.1111/j.1151-2916.1990.tb06686.x ↗
16. Chen · Journal of the American Ceramic Society · 1990 · 73 · 286510.1111/j.1151-2916.1990.tb06687.x ↗
17. H. Matsubara, K. Furukawa, R.J. Brook, in: S. Meriani and V. Sergo (Eds.). Fourth Euro Ceramics, Vol. 3, p. 597.
18. Zhu · Materials Science and Engineering · 1995 · A204 · 9610.1016/0921-5093(95)09944-1 ↗
19. Zeng · Materials Science and Engineering · 1998 · A252 · 30110.1016/S0921-5093(98)00665-0 ↗
20. Madhavrao · Journal of Materials Research · 1989 · 4 · 125110.1557/JMR.1989.1251 ↗
21. Schaffer · 1995 · 365
22. Alexander · Acta Metallurgica · 1957 · 5 · 66610.1016/0001-6160(57)90113-X ↗
23. Herring · Journal of Applied Physics · 1950 · 21 · 43710.1063/1.1699681 ↗
24. Exner · 1996 · 3 · 2627
25. Saito · ISIJ International · 1992 · 32 · 26710.2355/isijinternational.32.267 ↗