Variations in microstructure and texture during high temperature deformation of Al–Mg alloy
Source abstract
Abstract
Abstract The effect of strain rate on the superplastic deformation of a fine-grained aluminium–magnesium alloy has been investigated. Microstructural transformations were quantified by crystallographic texture, the study of the size of the grains, their morphology and their spatial distribution. At low strain rate a progressive reduction of the initial texture is observed, resulting from the predominance of grain boundary sliding. But even for large strains the texture randomisation is not complete, which confirms the role played by dislocation creep in superplasticity of the alloy. At high strain rate textural components of plasticity develop and the grains become elongated along the tensile direction. Nevertheless, transmission electron microscopy observations and a calculation of the expected variation with strain of the shape of the grains, suggest that continuous recrystallisation is likely to take place during deformation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · Electromagnetic Effects on Materials · High-Velocity Impact and Material Behavior
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. Bampton · Acta Metall. · 1982 · 30 · 204310.1016/0001-6160(82)90107-9 ↗
2. Conrad · Scr. Metall. · 1989 · 23 · 69710.1016/0036-9748(89)90514-0 ↗
3. Xinggang · Z. Metallkd. · 1993 · 84 · 216
4. Shin · Metall. Trans. · 1990 · 21A · 272910.1007/BF02646068 ↗
5. Strijbos · Mater. Sci. Eng. · 1995 · A194 · 12910.1016/0921-5093(94)09655-4 ↗
6. Blandin · Acta Mater. · 1996 · 44 · 231710.1016/1359-6454(95)00340-1 ↗
7. McNelley · Scr. Metall. · 1989 · 23 · 165710.1016/0036-9748(89)90338-4 ↗
8. H. Iwasaki, K. Higashi, S. Tanimura, T. Komatubara, S. Hayami, in: S. Hori, M. Tokizane, N. Furushiro (Eds.), Superplasticity in Advances Materials, ICSAM-91, Osaka, Japan, JSRS, 1991, pp. 447–452.
9. Li · Scr. Metall. Mater. · 1993 · 29 · 87510.1016/0956-716X(93)90374-2 ↗
10. Matsuo · 1994 · 277
11. Vetrano · Scr. Metall. Mater. · 1994 · 30 · 56510.1016/0956-716X(94)90430-8 ↗
12. Verma · Mater. Sci. Eng. · 1995 · A191 · 14310.1016/0921-5093(94)09644-9 ↗
13. Friedman · Metall. Mater. Trans. · 1996 · 27A · 382710.1007/BF02595632 ↗
14. Verma · Metall. Mater. Trans. · 1996 · 27A · 188910.1007/BF02651938 ↗
15. Li · Acta Mater. · 1996 · 44 · 21710.1016/1359-6454(95)00141-8 ↗
16. Wu · Scr. Mater. · 1996 · 34 · 124310.1016/1359-6462(95)00652-4 ↗
17. Li · Acta Mater. · 1997 · 45 · 388710.1016/S1359-6454(97)00032-3 ↗
18. Li · Mater. Sci. Tech. · 1997 · 13 · 1710.1179/mst.1997.13.1.17 ↗
19. Y. Takayama, T. Tozawa, H. Kato, H. Watanabe, M. Kokubo, in: T. Sato, S. Kumai, T. Kobayashi, Y. Murakami, (Eds.), 6th Int. Conf. On Aluminum Alloys, Vol. 2, The Japan Institute of Metals, Toyohashi, Japan, 1998, pp. 1051–1056.
20. Kannan · Metall. Mater. Trans. · 1998 · 29A · 121110.1007/s11661-998-0248-1 ↗
21. E.M. Taleff, G.A. Henshall, D.R. Lesuer, T.G. Nieh, J. Wadsworth, in: A.K. Ghosh, T.R. Bieler (Eds.), Superplasticity and Superplastic Forming, TMS, Las Vegas, USA, 1995, pp. 3–10.
22. Taleff · Metall. Mater. Trans. · 1996 · 27A · 34310.1007/BF02648411 ↗
23. Taleff · Metall. Mater. Trans. · 1998 · 29A · 1081
24. Woo · Scr. Mater. · 1997 · 37 · 135110.1016/S1359-6462(97)00275-3 ↗
25. Flacher · Mater. Sci. Eng. · 1996 · A219 · 14810.1016/S0921-5093(96)10419-6 ↗
26. Bricknell · Acta Metall. · 1979 · 27 · 130310.1016/0001-6160(79)90199-8 ↗
27. P.N. Kalu, S.J. Hales, in: J.J. Jonas, T.R. Bieler, K.J. Bowman (Eds.), Advances in Hot Deformation Textures and Microstructures, TMS, Pittsburgh, USA, 1994, pp. 385–395.
28. T.R. McNelley, M.E. McMahon, Metall. Mater. Trans., 28A (1997) 1879-1887.10.1007/s11661-997-0118-2 ↗
29. Z. Jin, T.R. Bieler, in: A.K. Ghosh, T.R. Bieler (Eds.), Superplasticity and Superplastic Forming, TMS, San Antonio, USA, 1998, pp. 197–207.
30. Perez-Prado · Metall. Mater. Trans. · 1998 · 29A · 48510.1007/s11661-998-0129-7 ↗
31. Wenk · J. Appl. Crystallogr. · 1998 · 31 · 26210.1107/S002188989700811X ↗
32. Perez-Prado · Scr. Mater. · 1996 · 35 · 145510.1016/S1359-6462(96)00324-7 ↗
33. Perez-Prado · Mater. Sci. Eng. · 1998 · A244 · 21610.1016/S0921-5093(97)00567-4 ↗
34. McNelley · Scr. Mater. · 1997 · 36 · 36910.1016/S1359-6462(96)00403-4 ↗
35. Benum · Acta Mater. · 1997 · 45 · 459310.1016/S1359-6454(97)00157-2 ↗
36. S.X. Ding, B. Ren, J.G. Morris, in: J.J. Jonas, T.R. Bieler, K.J. Bowman (Eds.), Advances in Hot Deformation Textures and Microstructures, TMS, Pittsburgh, USA, 1994, pp. 281–295.
37. Dahlem-Klein · Mater. Sci. Forum · 1993 · 113-115 · 69710.4028/www.scientific.net/MSF.113-115.697 ↗
38. J.S. Vetrano, C.A. Lavender, M.T. Smith, S.M. Bruemmer, in: J.J. Jonas, T.R. Bieler, K.J. Bowman (Eds.), Advances in Hot Deformation Textures and Microstructures, TMS, Pittsburgh, USA, 1994, pp. 223–234.
39. T. Chanda, A.K. Ghosh, C. Lavender, in: A.K. Ghosh, T.R. Bieler (Eds.), Superplasticity and Superplastic Forming., TMS, Las Vegas, USA, 1995, pp. 41–48.
40. Q. Zhu, V. Demuth, W. Blum, H. McQueen, in: H.J. McQueen, J.P. Bailon, J.I. Dickson, J.J. Jonas, M.G. Akben (Eds.), Strength of Materials, ICSMA 7, Pergamon Press, Montréal, Canada, 1994, pp. 803–806.
41. H.J McQueen, M.E. Kassner, in: T.R. McNelley, H.C. Heikkenen (Eds.), Superplasticity in Aerospace II, TMS, The Metallurgical Society, Phoenix, USA, 1990, pp. 189–206.
42. Caceres · Acta Metall. · 1984 · 32 · 41510.1016/0001-6160(84)90115-9 ↗
43. D. Larivière, MSc Thesis, I.N.P., Grenoble, 1998.10.1017/CBO9781139166959.003 ↗