A comparative study of the surface glaze characteristics of concrete treated with CO2 and high power diode lasers Part II: mechanical, chemical and physical properties
Source abstract
Abstract
Abstract The hardened ordinary Portland cement (OPC) surface layer of concrete which was glazed using a CO 2 and a high power diode laser (see Part I of this paper) has been tested in order to determine the mechanical, chemical and physical characteristics of the glazes. The work showed that the generation of the surface glazes resulted in improved mechanical, chemical and physical properties over the untreated OPC surface of concrete. However, differences in the performance of the CO 2 and high power diode laser (HPDL) generated glazes were observed. These are believed to be due to the differences in the morphology and microstructure of the glazes generated as a result of the differing beam absorption characteristics of the two lasers. Life assessment testing revealed that the laser-glazed OPC surfaces effected an increase in actual wear life of 1.3–17.7 times over the untreated OPC surface of concrete depending upon the corrosive environment.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Building materials and conservation · High-Temperature Coating Behaviors · Laser Material Processing Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (12)
Show source-provided references
1. Bungey · Mag. Concr. Res. · 1992 · 44 · 2110.1680/macr.1992.44.158.21 ↗
2. Non-destructive testing of concrete
3. Hall · Building Environ. · 1986 · 21 · 11310.1016/0360-1323(86)90017-X ↗
4. Wilson · Eur. J. Soil Sci. · 1997 · 48 · 7910.1111/j.1365-2389.1997.tb00187.x ↗
5. Dickson · 1951 · 148
6. Petitbon · Surf. Coat. Tech. · 1991 · 49 · 5710.1016/0257-8972(91)90031-Q ↗
7. Petitbon · Surf. Coat. Tech. · 1991 · 49 · 5710.1016/0257-8972(91)90031-Q ↗
8. Lawrence · Opt. Laser Tech. · 1998 · 30 · 21510.1016/S0030-3992(98)00039-5 ↗
9. BS 6431: Part 19: 1984, Ceramic Wall and Floor Tiles: Method for Determination of Chemical Resistance. Glazed Tiles.
10. J. Verran, Letter to Author, October 1997.10.1097/00005373-199710000-00036 ↗
11. ASTM C597-91, Standards Test Method for Compressive Strength of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings and Polymer Concretes.
12. Vargin · 1965 · 125