Tracking phase-level properties in heat-treated high-chromium cast irons using mechanical microscopy
Source abstract
Abstract
Determining individual microstructural components in multicomponent and multiscale materials can be a challenging task. High chromium cast irons (HCCI), particularly in heat-treated states, exhibit complex microstructures that include austenite or martensite on a meso-scale, as well as hard and micro-sized eutectic carbides, and secondary carbides on a sub-micron or nanometric length scale. Assessing the mechanical properties and quantities of these phases requires small scale characterization over relatively large areas. In the current work, the mechanical properties of each individual constitutive phase were determined by using high-speed nanoindentation maps as a function of four different heat treatments. An area of 400 × 300 μm containing 30 000 indentations on each sample was analyzed. Statistical deconvolution and machine-learning clustering methods were used to determine the hardness and elastic modulus of the different microstructural components. The results illustrate how the microstructure and mechanical properties of the various phases evolve through heat treatment, supporting the notion that secondary carbides reinforce and strength the HCCI matrix, rather than acting as an individual component.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Metal Alloys Wear and Properties · Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. The morphology and microtexture of M7C3carbides in Fe-Cr-C and Fe-Cr-C-Si alloys of near eutectic composition10.1007/BF00356539 ↗
2. XRD and electron microscope study of an As-Cast 26 . 6 % chromium white iron microstructure10.1016/j.matchemphys.2003.11.037 ↗
3. The nature of stacking faults within iron-chromium carbide of the type (Fe,Cr)7C310.1016/j.jallcom.2009.12.197 ↗
4. XRD and electron microscope study of a heat treated 26.6% chromium white iron microstructure10.1016/j.matchemphys.2006.02.013 ↗
5. The effect of thermal processing and chemical composition on secondary carbide precipitation and hardness in high-chromium cast irons10.1007/s40962-020-00407-4 ↗
6. Secondary carbides in high chromium cast irons: an alternative approach to their morphological and spatial distribution characterization10.1016/j.matchar.2018.08.020 ↗
7. High chromium cast irons: destabilized-subcritical secondary carbide precipitation and its effect on hardness and wear properties10.1007/s11665-018-3347-1 ↗
8. High-speed nanoindentation mapping: a review of recent advances and applications10.1016/j.cossms.2023.101107 ↗
9. Dependence of nanoindentation hardness with crystallographic orientation of austenite grains in metastable stainless steels10.1016/j.msea.2015.07.096 ↗
10. Intrinsic hardness of constitutive phases in WC-Co composites: nanoindentation testing, statistical analysis, WC crystal orientation effects and flow stress for the constrained metallic binder10.1016/j.jeurceramsoc.2015.04.021 ↗
11. Hall-petch strengthening of the constrained metallic binder in WC–Co cemented carbides: experimental assessment by means of massive nanoindentation and statistical analysis10.1016/j.msea.2016.09.020 ↗
12. Mapping of mechanical properties at microstructural length scale in WC-Co cemented carbides: assessment of hardness and elastic modulus by means of high speed massive nanoindentation and statistical analysis10.1016/j.ijrmhm.2018.04.019 ↗
13. Small-scale mechanical properties of constitutive phases within a polycrystalline cubic boron nitride composite10.1016/j.jeurceramsoc.2019.08.023 ↗
14. Micromechanical mapping of polycrystalline cubic boron nitride composites by means of high-speed nanoindentation: assessment of microstructural assemblage effects10.1016/j.jeurceramsoc.2022.08.047 ↗
15. Scaling relationships for indentation measurements10.1080/01418610208235693 ↗
16. The influence of the H/E ratio on wear resistance of coating systems – insights from small-scale testing10.1016/j.surfcoat.2022.128272 ↗
17. Interplay between the microstructure and tribological performance of a destabilized 26 wt% Cr HCCI: the influence of temperature and heating rate10.1016/j.triboint.2023.108532 ↗
18. Time - Dependant microstructural evolution and tribological behaviour of a 26 Wt % Cr white cast iron subjected to a destabilization heat treatment
19. Kinetics of secondary carbides precipitation in a Hiqh-Chromium white iron10.1361/105994903770342881 ↗
20. Microstructural characteristics and mechanical properties of heat treated High-Cr white cast iron alloys
21. Nayak · 2021
22. Combinatorial investigation of the Ni–Ta system via correlated high-speed nanoindentation and EDX mapping
23. A comparative study on the influence of chromium on the phase fraction and elemental distribution in As-Cast high chromium cast irons: simulation vs. experimentation
24. Evaluation of etching process parameter optimization in the objective specific microstructural characterization of As-Cast and heat treated HCCI alloy10.3139/147.110682 ↗
25. A profile refinement method for nuclear and magnetic structures10.1107/S0021889869006558 ↗
26. Total pattern fitting for the combined size-strain-stress-texture determination in thin film diffraction10.1016/j.nimb.2009.09.053 ↗
27. Fiji: an open-source platform for biological-image analysis10.1038/nmeth.2019 ↗
28. Image processing using open source tools and their implementation in the analysis of complex microstructures10.1515/pm-2021-0039 ↗
29. Statistical indentation techniques for hydrated nanocomposites: concrete, bone, and shale10.1111/j.1551-2916.2007.02012.x ↗
30. Hastie · 2001
31. Analysis of the carbide precipitation and microstructural evolution in HCCI as a function of the heating rate and destabilization temperature
32. Characterization of microstructure and mechanical properties of high chromium cast irons using SEM and nanoindentation10.1007/s11665-014-1245-8 ↗
33. Microstructure and crystallography of M7C3 carbide in chromium cast iron10.1016/j.matchemphys.2015.05.008 ↗
34. Nanohardness measurement of high-purity Fe±C martensite10.1016/S1359-6462(01)01121-6 ↗
35. Phase identification of dual-phase (DP980) steels by electron backscatter diffraction and nanoindentation techniques10.1017/S1431927615015779 ↗
36. On the use of nanoindentation for cementitious materials10.1007/BF02479557 ↗
37. Grid indentation analysis of composite microstructure and mechanics: principles and validation10.1016/j.msea.2006.05.125 ↗
38. A microstructural study of destabilised 30wt %Cr-2.3wt %C high chromium cast iron10.2355/isijinternational.44.396 ↗
39. Combinatorial investigation of Al–Cu intermetallics using small-scale mechanical testing10.1016/j.jallcom.2019.153536 ↗
40. Assessment of mechanical properties at microstructural length scale of Ti(C,N)–FeNi ceramic-metal composites by means of massive nanoindentation and statistical analysis10.1016/j.ceramint.2019.06.292 ↗
41. Pranav · 2023