journal article·2025-04Open access

Exploration of hypereutectoid compositions for achieving and enhancing superelasticity in biomedical Ti–Au–Mo alloys

Naoki Nohira, Wan-Ting Chiu, Akira Umise, Masaki Tahara, Hideki Hosoda

Abstract

β (bcc) Ti–Au based biomedical alloys are attractive due to their excellent biocompatibility, X-ray radiographic imaging properties, and shape memory effects. However, increasing the Au content beyond the eutectoid composition (4.2 mol% Au, β-Ti = α-Ti (hcp) + Ti 3 Au, in the binary system) presents a challenge because the intermetallic compound Ti 3 Au readily forms at hypereutectoid compositions, leading to increased brittleness in the alloys. Thus, the feasibility of hypereutectoid compositions was explored in this work using the Ti–Au–Mo ternary system. The addition of Mo was expected to significantly suppress the eutectoid reaction by enhancing the stability of the β phase. In solution-treated alloys, it was found that Ti–Au–5Mo alloys with up to 6 mol% Au (approximately 20 mass% Au, 5 karat) exhibited good cold workability, achieving a 95 % reduction in thickness. Furthermore, in the Ti–6Au–5Mo alloy, a β single phase was successfully quenched without the formation of Ti 3 Au. The stability of the β phase increased with higher Au content, with the reduction rate in the martensitic transformation temperature of −85 K/mol% Au. Additionally, the Ti–6Au–5Mo alloy exhibited clear superelasticity at room temperature, with a 4.8 % shape recovery strain and a 2.7 % superelastic strain. Besides, the effect of Ti 3 Au precipitation through heat treatment on mechanical properties was also evaluated. These findings provide a solid foundation for the development of functional low-karat Ti–Au alloys for advanced medical devices.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Titanium Alloys Microstructure and Properties · Bone Tissue Engineering Materials · Shape Memory Alloy Transformations

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (66)

Show source-provided references
1. Yamauchi · 2011
2. Beta-type Ti-Nb-Zr-Cr alloys with large plasticity and significant strain hardening10.1016/j.matdes.2019.108064 ↗
3. Non-negligible role of gradient porous structure in superelasticity deterioration and improvement of NiTi shape memory alloys10.1016/j.jmst.2023.10.053 ↗
4. Effect of cyclic deformation on the pseudoelasticity characteristics of Ti-Ni alloys10.1007/BF02644447 ↗
5. Nickel hypersensitivity: a clinical review and call to action10.1111/j.1365-4632.2009.04307.x ↗
6. A review on alloy design, biological response, and strengthening of β-titanium alloys as biomaterials10.1016/j.msec.2020.111661 ↗
7. Gold nanoparticles: a new X-ray contrast agent10.1259/bjr/13169882 ↗
8. Study of corrosion in biocompatible metals for implants: a review10.1016/j.jallcom.2017.01.196 ↗
9. Characterization of passive layers formed on Ti–10 wt% (Ag, Au, Pd, or Pt) binary alloys and their effects on galvanic corrosion10.1016/j.corsci.2015.04.007 ↗
10. Metallic implant biomaterials10.1016/j.mser.2014.10.001 ↗
11. The Au-Ti (Gold-Titanium) system10.1007/BF02868667 ↗
12. Morphological evolution of transformation products and eutectoid transformation(s) in a hyper-eutectoid Ti-12 at% Cu alloy10.1016/j.actamat.2019.01.044 ↗
13. Novel eutectoid Ti-5Ni alloy fabricated via direct energy deposition10.1016/j.scriptamat.2021.113918 ↗
14. Effect of Cu-induced eutectoid transformation on microstructure and mechanical properties of Ti–6Al–4V alloy by laser wire deposition10.1016/j.msea.2021.142316 ↗
15. A novel Ti-Au alloy with strong antibacterial properties and excellent biocompatibility for biomedical application10.1016/j.msec.2022.112653 ↗
16. On the existence of the β→αm transformation in the alloy systems Ti-Ag, Ti-Au, and Ti-Si10.1007/BF02646561 ↗
17. Part I Nucleation kinetics of the β → αm transformation in Ti-Ag and Ti-Au alloys10.1016/0001-6160(80)90087-5 ↗
18. Microstructures and phase transformations of Ti-30Zr-xNb (x = 5, 7, 9, 13 at.%) shape memory alloys10.1016/j.matchar.2016.10.019 ↗
19. β-Type Ti–Mo–Si ternary alloys designed for biomedical applications10.1016/j.matdes.2011.08.012 ↗
20. Effect of heat treatment on shape memory effect and superelasticity in Ti–Mo–Sn alloys10.1016/j.msea.2006.05.092 ↗
21. Thermal stability and phase transformations of martensitic Ti-Nb alloys10.1088/1468-6996/14/5/055004 ↗
22. Mechanical properties and shape memory behavior of Ti-Nb alloys10.2320/matertrans.45.2443 ↗
23. Boyer · 1994
24. Structural stabilities of β-Ti alloys studied using a new Mo equivalent derived from [β/(α + β)] phase-boundary slopes10.1007/s11661-015-2923-3 ↗
25. Effects of Sn content and aging conditions on superelasticity in biomedical Ti-Mo-Sn alloys10.2320/matertrans.47.513 ↗
26. The effects of α″ and ω phases on the superelasticity and shape memory effect of binary Ti-Mo alloys10.1016/j.jallcom.2017.05.299 ↗
27. Achievement of room temperature superelasticity in Ti-Mo-Al alloy system via manipulation of ω phase stability10.3390/ma15030861 ↗
28. Shape memory properties of Ti–Nb–Mo biomedical alloys10.1016/j.actamat.2010.04.013 ↗
29. Effect of 3d transition metal additions on the phase constituent, mechanical properties, and shape memory effect of near–eutectoid Ti–4Au biomedical alloys10.1016/j.jallcom.2020.157599 ↗
30. Effect of Cr additions on the phase constituent, mechanical properties, and shape memory effect of near–eutectoid Ti–4Au towards the biomaterial applications10.1016/j.jallcom.2021.159037 ↗
31. Enhancement of the superelastic behavior of the Ti–Au–Cr–based shape memory alloys via the manipulations of annealing–treatments and Ta additions10.1016/j.msea.2022.143312 ↗
32. Effect of annealing temperature on microstructure and superelastic properties of Ti-Au-Cr-Zr alloy10.2320/matertrans.M2014439 ↗
33. The Mo−Ti (Molybdenum-Titanium) system10.1007/BF02881476 ↗
34. Influence of the precipitates on the shape memory effect and superelasticity of the near–eutectoid Ti–Au–Fe alloy towards biomaterial applications10.1016/j.intermet.2021.107180 ↗
35. Theoretical study of the effects of alloying elements on the strength and modulus of β-type bio-titanium alloys10.1016/S0921-5093(98)00886-7 ↗
36. Microstructure, mechanical and superelastic behaviors in Ni-free Ti-Zr-Nb-Sn shape memory alloy fibers prepared by rapid solidification processing10.1016/j.msea.2020.139283 ↗
37. Microstructure and shape memory effect of Ti–20Zr–10Nb alloy10.1016/j.msea.2009.08.063 ↗
38. Effect of heat treatment and Sn content on superelasticity in biocompatible TiNbSn alloys10.2320/matertrans.43.2978 ↗
39. Ingot metallurgy and microstructural characterization of Ti–Ta alloys10.3139/146.111010 ↗
40. Metastable phase diagram on heating in quenched Ti-Nb high-temperature shape memory alloys10.1007/s10853-021-05814-4 ↗
41. Oxidization on phase transformations in Ti-Nb high temperature shape memory alloys10.1016/j.jallcom.2024.175570 ↗
42. Effects of Cr and Sn additives on the martensitic transformation and deformation behavior of Ti-Cr-Sn biomedical shape memory alloys10.1016/j.msea.2021.141668 ↗
43. Martensitic transformation and superelasticity of Ti-Nb-Pt alloys10.2320/matertrans.48.400 ↗
44. Martensitic transformation and superelastic properties of Ti-Nb base alloys10.2320/matertrans.M2014454 ↗
45. The relationship between the abrasive wear resistance, hardness and microstructure of ferritic materials10.1016/0043-1648(74)90101-X ↗
46. Bhushan · 2000
47. Microstructure, mechanical properties, castability and in vitro biocompatibility of Ti–Bi alloys developed for dental applications10.1016/j.actbio.2015.01.009 ↗
48. Characterization of the martensitic transformation in the superelastic Ti–24Nb–4Zr–8Sn alloy by in situ synchrotron X-ray diffraction and dynamic mechanical analysis10.1016/j.actamat.2015.01.039 ↗
49. Role of fine nano-scaled isothermal omega phase on the mechanical and superelastic properties of a high Zr-containing Ti-Zr-Nb-Sn shape memory alloy10.1016/j.msea.2020.139278 ↗
50. Shape memory effect and phase transformations of Ti–19.5Zr–10Nb–0.5Fe alloy10.1016/j.scriptamat.2015.02.003 ↗
51. Strain induced martensite stabilization and shape memory effect of Ti-20Zr-10Nb-4Ta alloy10.1016/j.msea.2016.01.104 ↗
52. Deformation mechanism of the (β + α”) dual-phase Ti-42Zr-13Nb alloy exhibiting an abnormal work-hardening behavior10.1016/j.matchar.2023.113166 ↗
53. Effect of plastic deformation modes on tensile properties of beta titanium alloys10.2320/matertrans1960.27.496 ↗
54. Tailoring the microstructure, martensitic transformation and strain recovery characteristics of Ti-Ta shape memory alloys by changing Hf content10.1016/j.jmst.2020.10.088 ↗
55. A β-titanium alloy with extra high strain-hardening rate: design and mechanical properties10.1016/j.scriptamat.2015.11.020 ↗
56. Deformation mechanisms in a metastable beta titanium twinning induced plasticity alloy with high yield strength and high strain hardening rate10.1016/j.actamat.2018.04.035 ↗
57. Microstructural evolution and strain-hardening in TWIP Ti alloys10.1016/j.actamat.2019.11.009 ↗
58. Materials information and mechanical response of TRIP/TWIP Ti alloys10.1038/s41524-021-00560-2 ↗
59. Superelasticity over a wide temperature range in metastable β-Ti shape memory alloys10.1016/j.jallcom.2020.157090 ↗
60. Effect of Sn content on the microstructural features, martensitic transformation and mechanical properties in Ti-V-Al-based shape memory alloys
61. Effect of Zr content on phase stability, deformation behavior, and young's modulus in Ti–Nb–Zr alloys10.3390/ma13020476 ↗
62. Microstructure characteristics and superelastic properties of novel Ti–Cr–Sn superelastic alloys10.1016/j.msea.2023.144790 ↗
63. Effect of grain size on the recovery strain in a new Ti–20Zr–12Nb–2Sn superelastic alloy10.1016/j.msea.2020.139878 ↗
64. Phase constituent and microstructure manipulations via annealing for enhancements of mechanical property and functionalities of Ti–Au–Cr–Ta biomedical shape memory alloys10.1016/j.jallcom.2022.166016 ↗
65. Inverse gradient nanostructure through gradient cold rolling demonstrated with superelasticity improvement in Ti-50.3Ni shape memory alloy10.1016/j.jmst.2023.12.003 ↗
66. Physical metallurgy of Ti–Ni-based shape memory alloys10.1016/j.pmatsci.2004.10.001 ↗