journal article·2025-04Open access

A novel high-performance Al-6Zn-4Ni-2Mg-1Cu-Fe alloy for wire-arc directed energy deposition

Thomas Klein, Petra Spoerk-Erdely, Aurel Arnoldt, Norbert Enzinger, Martin Stockinger, Clemens Simson

Abstract

Directed energy deposition processes are increasingly incorporated in modern industrial manufacturing chains. Aluminum alloys often fall short either of mechanical properties, or of processability. Therefore, the need for new alloy compositions emerges that show both robust and versatile processability as well as high mechanical performance. Here, an alloy composition that has not been tested yet for directed energy deposition is investigated: Al-6Zn-4Ni-2Mg-1Cu-Fe. To achieve the required properties, the positive effects of intermetallic phases forming during solidification and subsequent heat treatment are jointly utilized in this alloy system. After wire fabrication and processing by directed energy deposition, the specimens were characterized in detail and the effects of a post-process heat treatment were assessed. Characterization results evidence the absence of crystallographic texture and the presence of various intermetallic phases in combination with high mechanical strength values: 485 MPa yield strength and 545 MPa ultimate tensile strength after a solution heat treatment followed by an artificial aging heat treatment. The systematic investigations of a new high-performance aluminum alloy shed light upon the complex microstructures in as-built and heat-treated material conditions and their relevance to mechanical properties. • Advanced alloy composition Al-6Zn-4Ni-2Mg-1Cu-Fe tested for waDED and processed without cracks. • Presence of intermetallic phases suppresses texture formation on solidification. • Second phases omit grain growth during heat treatment. • Phase formation sequence analyzed in depth. • Pronounced age-hardening response observed and yield strength of ∼485 MPa reached.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · High Entropy Alloys Studies · Additive Manufacturing Materials and Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (55)

Show source-provided references
1. A review of the wire arc additive manufacturing of metals: properties, defects and quality improvement10.1016/j.jmapro.2018.08.001 ↗
2. Invited review article: strategies and processes for high quality wire arc additive manufacturing
3. Wire + arc additive manufacturing10.1179/1743284715Y.0000000073 ↗
4. The current state of research of wire arc additive manufacturing (WAAM): a review10.3390/app11188619 ↗
5. An environmental impact comparison between wire + arc additive manufacture and forging for the production of a titanium component
6. Investigation of complex single-walled intersecting structures fabricated by wire-arc directed energy deposition10.1108/RPJ-10-2023-0345 ↗
7. A LCA and LCC analysis of pure subtractive manufacturing, wire arc additive manufacturing, and selective laser melting approaches10.1016/j.jmapro.2023.05.102 ↗
8. Microstructure evolution induced by the intrinsic heat treatment occurring during wire-arc additive manufacturing of an Al-Mg-Zn-Cu crossover alloy10.1016/j.matlet.2021.130500 ↗
9. Wire arc additive manufacturing of Al-Zn-Mg-Cu alloy: microstructures and mechanical properties
10. Fusion zone geometries, cooling rates and solidification parameters during wire arc additive manufacturing10.1016/j.ijheatmasstransfer.2018.08.111 ↗
11. Metal alloys for fusion-based additive manufacturing10.1002/adem.201700952 ↗
12. Promoting the columnar to equiaxed transition and grain refinement of titanium alloys during additive manufacturing10.1016/j.actamat.2019.02.020 ↗
13. Microstructure by design: an approach of grain refinement and isotropy improvement in multi-layer wire-based laser metal deposition10.1016/j.msea.2019.138635 ↗
14. Susceptibility of ternary aluminum alloys to cracking during solidification10.1016/j.actamat.2016.12.028 ↗
15. Influence of deposition strategy and heat treatment on mechanical properties and microstructure of 2319 aluminium WAAM components10.1016/j.matdes.2022.110974 ↗
16. Effects of interlayer temperature on the microstructures of wire arc additive manufactured Al-Zn-Mg-Cu alloy: insights into texture responses and dynamic precipitation behaviors
17. Wire-arc additive manufacturing of Al-Zn5.5-Mg-Cu (ML7075): shifting paradigms of additive manufacture-ability10.1016/j.matlet.2022.131841 ↗
18. Microstructure and mechanical properties of 600 MPa grade ultra-high strength aluminum alloy fabricated by wire-arc additive manufacturing10.1016/j.jmst.2022.12.007 ↗
19. Microstructure and mechanical properties of an advanced Ag-microalloyed aluminum crossover alloy tailored for wire-arc directed energy deposition10.1007/s11837-023-05838-y ↗
20. Mechanical properties in the semi-solid state and hot tearing of aluminium alloys10.1016/S0079-6425(03)00037-9 ↗
21. Five decades of research on the development of eutectic as engineering materials10.1016/j.pmatsci.2021.100793 ↗
22. Effect of heat input on formability, microstructure, and properties of Al-7Si-0.6Mg alloys deposited by CMT-WAAM process10.3390/app10010070 ↗
23. Comparative study of eutectic Al-Si alloys manufactured by WAAM and casting10.1007/s00170-020-05735-7 ↗
24. A hypoeutectic Al-Ni-Mg in situ composite processed by wire-arc additive manufacturing: phase evolution and mechanical behavior10.1016/j.matdes.2022.111066 ↗
25. Solidification in metal additive manufacturing: challenges, solutions, and opportunities
26. Review of aluminum alloy development for wire arc additive manufacturing10.3390/ma14185370 ↗
27. Effect of the eutectic phase on the microstructure and tensile strength of an Al–Zn–Ni–Mg–Cu casting aluminum alloy10.1007/s11223-019-00098-1 ↗
28. Two-dimensional detector software: from real detector to idealised image or two-theta scan10.1080/08957959608201408 ↗
29. Rietveld texture analysis from diffraction images10.1524/zksu.2007.2007.suppl_26.125 ↗
30. Residual stress and structural analysis of thin films using a combined X-ray analysis10.1016/j.tsf.2003.10.150 ↗
31. Exploring structural changes, manufacturing, joining, and repair of intermetallic γ-TiAl-based alloys: recent progress enabled by in situ synchrotron X-ray techniques10.1002/adem.202000947 ↗
32. Predicting the quench sensitivity of Al-Zn-Mg-Cu alloys: a model for linear cooling and strengthening10.1016/j.matdes.2015.09.058 ↗
33. Differential scanning calorimetry of age-hardenable aluminium alloys: effects of sample preparation, experimental conditions, and baseline correction10.1007/s10973-024-13019-5 ↗
34. Understanding the thermodynamics and crystal structure of complex Fe containing intermetallic phases formed on solidification of aluminium alloys10.1007/s11837-019-03380-4 ↗
35. Evolution of Fe-containing intermetallic phases and abnormal grain growth in 6063 aluminum alloy during homogenization10.1016/j.rinp.2019.102535 ↗
36. Sparingly alloyed high-strength aluminum alloys: principles of optimization of phase composition10.1007/s11041-012-9409-3 ↗
37. Influence of Ni in high Fe containing recyclable Al-Si cast alloys10.1016/j.matdes.2019.108017 ↗
38. Quench rate sensitivity of age-hardenable Al-Zn-Mg-Cu alloys with respect to the Zn/Mg ratio: an in situ SAXS and HEXRD study10.1016/j.actamat.2022.117727 ↗
39. Control of macro-/microstructure and mechanical properties of a wire-arc additive manufactured aluminum alloy10.1007/s00170-020-05396-6 ↗
40. Descriptive tools for the analysis of texture projects with large datasets using MTEX : strength, symmetry and components10.1144/SP409.8 ↗
41. Insights of texture and microstructure evolution in the short time annealing of Al-Cu-Mg alloy at large temperature range10.1016/j.jallcom.2021.159613 ↗
42. Microstructural evolution and mechanical behaviour of near-eutectic high entropy alloy10.1007/s11837-023-05934-z ↗
43. Effects of rapid heating on solutionizing characteristics of Al-Si-Mg alloys using a fluidized bed10.1007/s11661-006-0048-4 ↗
44. Inhibition of grain growth by second-phase particles10.1016/0001-6160(88)90053-3 ↗
45. The crystal structures of Ni2Al3 and NiAl310.1080/14786443708561875 ↗
46. Determination of phases present in cast material of an Al-0. 5 wt. % Fe-0. 2 wt. % Si alloy
47. On the adaptability of 1/1 cubic approximant structure in the Mg-Al-Zn system with the particular example of Mg32Al12Zn3710.1016/j.jallcom.2015.09.201 ↗
48. The charge-density study of the Laves phases, MgZn2 and MgCu210.1107/S0108270184002791 ↗
49. Lattice mismatch modeling of aluminum alloys10.1016/j.commatsci.2017.06.021 ↗
50. Precipitation behaviour in AlMgZnCuAg crossover alloy with coarse and ultrafine grains10.1080/21663831.2023.2281589 ↗
51. Analysis of precipitation and dissolution in overaged 7xxx aluminium alloys using DSC10.4028/www.scientific.net/MSF.331-337.1071 ↗
52. Dissolution and precipitation behavior for hot forming of 7021 and 7075 aluminum alloys10.3390/met8070531 ↗
53. Microstructure and mechanical properties of wire + arc additively manufactured 2024 aluminum alloy components: as-deposited and post heat-treated10.1016/j.jmapro.2019.03.003 ↗
54. Methods for rapid pore classification in metal additive manufacturing10.1007/s11837-019-03761-9 ↗
55. Wire-arc additive manufacturing of a novel high-performance Al-Zn-Mg-Cu alloy: processing, characterization and feasibility demonstration