Gaseous carbo-oxidizing of Ti-6Al-4V: On the role of initial microstructure
Source abstract
Abstract
The role of microstructure resulting from different heat treatment procedures on the thermochemical surface hardening response was investigated for Ti-6Al-4V alpha-beta alloy. Four different types of microstructures were addressed, i.e. equiaxial, lamellar, bimodal and martensitic and these were realized by adopting different heat treatment procedures. These different conditions were subsequently carbo-oxidized in an atmosphere consisting of 50%CO–50%CO2 at ambient pressure in the temperature range 900–1050 K at 50 K intervals. The microstructural evolution of the bulk and the hardened case for the different samples was investigated. Hardness profiles were recorded on cross-sections of the samples and the microstructure was investigated with light optical microscopy (LOM) and scanning electron microscopy (SEM). X-ray diffraction (XRD) depth profiling for in-depth phase determination was carried out by successive sublayer removal. A diffusion zone with interstitials in solid solution in α-Ti located underneath three oxide layers developed for all conditions treated. Layers of rutile TiO2 were detected in the outermost surface as well as an inner layer. The outer/inner rutile layers were separated by a thin layer of α-Al2O3. The lamellar microstructure had a different carbo-oxidizing response than the other 3 conditions, by forming a significantly thinner case, which is interpreted in terms of a lower effective oxygen diffusion in a coarse lamellar α/β microstructure. For all initial conditions, thermochemical treatment was observed to affect the bulk microstructure and hardness. The present investigation suggests that surface hardening is not just an ‘add-on’ process, but has to be designed/tailored in relation to the microstructure determined by previous heat treatment steps.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Titanium Alloys Microstructure and Properties · Advanced materials and composites · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. M.J. Donachie, Titanium: a Technical Guide, ASM international2000.10.31399/asm.tb.ttg2.9781627082693 ↗
2. G. Lütjering, W. James, Titanium, Springer2007.
3. The kinetics of phase transformations during continuous cooling of the Ti6Al4V alloy from the single-phase β range10.2478/v10172-011-0077-x ↗
4. The kinetics of phase transformations during continuous cooling of Ti6Al4V alloy from the diphase α+β range10.2478/v10172-011-0025-9 ↗
5. The effect of microstructure on the mechanical properties of two-phase titanium alloys10.1016/S0924-0136(02)00248-0 ↗
6. Influence of processing on microstructure and mechanical properties of (α+ β) titanium alloys10.1016/S0921-5093(97)00778-8 ↗
7. Effect of α and β phase volume fraction on machining characteristics of titanium alloy Ti6Al4V10.1016/j.promfg.2016.11.009 ↗
8. Effect of the alpha grain size on the deformation behavior during isothermal compression of Ti–6Al–4V alloy10.1016/j.matdes.2015.08.130 ↗
9. Combined effects of texture and grain size distribution on the tensile behavior of α-titanium10.3390/ma11071088 ↗
10. The effect of microstructure on the mechanical properties of two-phase titanium alloys10.1016/S0261-3069(97)00087-3 ↗
11. Wear of diffusion hardened Ti–6Al–4V sliding against tool steel10.1016/j.wear.2009.10.009 ↗
12. Surface engineering of titanium with nitrogen10.1179/sur.1986.2.2.133 ↗
13. J. Holladay, Nitriding of titanium, defense metals information center, Battelle Memorial Institute1959.
14. Nitriding produces better hard case on titanium
15. The oxidation of titanium in oxygen at high temperatures10.1016/0001-6160(60)90170-X ↗
16. Oxygen boost diffusion for the deep-case hardening of titanium alloys10.1016/S0921-5093(99)00697-8 ↗
17. Surface hardening of titanium by carburizing and induction heat treatment
18. Surface carburizing of Ti–6Al–4V alloy by laser melting10.1016/j.optlaseng.2009.11.001 ↗
19. Gaseous surface hardening of Ti-6Al-4V fabricated by selective laser melting10.1016/j.surfcoat.2019.125278 ↗
20. Characterization of thermochemically surface-hardened titanium by light optical microscopy10.1520/MPC20160083 ↗
21. Surface hardening treatment for CP titanium and titanium alloys in use of Ar–5% CO gas10.2355/isijinternational.46.1329 ↗
22. Oxygen permeation behaviors and hardening effect of titanium alloys at high temperature
23. Ogden · 1955
24. J. Ferguson, The oxidation and contamination of titanium and its alloys, Defense Metals Information Center, Battelle Memorial Institute1968. .
25. High-temperature titanium-alloys - a review10.1007/BF03338617 ↗
26. High temperature oxidation behavior and research status of modifications on improving high temperature oxidation resistance of titanium alloys and titanium aluminides: a review10.1016/j.jallcom.2016.06.212 ↗
27. The scaling of titanium and titanium-base alloys in air10.5006/0010-9312-12.6.49 ↗
28. Mechanism of isothermal oxidation of the intel-metallic TiAl and of TiAl alloys10.1007/BF00665663 ↗
29. Surface hardening treatment for titanium and titanium alloys in use of CO2 gas10.2355/tetsutohagane1955.92.1_1 ↗
30. The effect of grain size on the surface properties of titanium grade 2 after different treatments10.1016/j.surfcoat.2017.12.005 ↗
31. Influence of ultrafine‐grained layer on gaseous nitriding of large‐sized titanium plate10.1002/adem.201700455 ↗
32. Effect of grain size on oxidation resistance of unalloyed titanium
33. Influence of grain size and microstructure on oxidation rates in titanium alloy Ti-6Al-4V under superplastic forming conditions10.1361/10599490421394 ↗
34. Oxidation behaviour of the near-α titanium alloy IMI 83410.1007/BF02704771 ↗
35. Effects of Ga, Sn addition and microstructure on oxidation behavior of near-alpha Ti alloy10.1007/s11085-017-9741-5 ↗
36. Influence of microstructure on oxidation behaviour of near-α titanium alloys10.1179/mst.1996.12.3.213 ↗
37. Effect of α phase on evolution of oxygen-rich layer on titanium alloys10.1016/S1003-6326(19)64962-9 ↗
38. Christiansen · 2019
39. Thermochemical surface engineering: a playground for science and innovation
40. Fine alpha in current and newly developed Ti alloys10.1016/j.actamat.2019.05.022 ↗
41. The influence of heat treatment on the microstructure and properties of HIPped Ti-6Al-4V10.1016/j.actamat.2018.12.025 ↗
42. Synchrotron X-ray diffraction investigation of the effect of cryogenic treatment on the microstructure of Ti-6Al-4V10.1016/j.apsusc.2019.144087 ↗
43. Thermochemical surface hardening of Ti-6Al-4V: on the role of temperature and treatment media10.1016/j.surfcoat.2021.127505 ↗
44. The Hall-Petch relationship10.1088/0370-1301/64/9/303 ↗
45. Tran · 2009