Rapid fabrication of NiTi alloys with different functional properties by electron beam freeform fabrication using Ni and Ti wires
Source abstract
Abstract
NiTi shape memory alloys with different functional properties at room temperature were successfully prepared by dual-wire electron beam freeform fabrication technology using Ni and Ti wires. The results indicated that the chemical composition, phase transition temperatures, and functional properties could be controlled effectively by adjusting the wire feeding ratio. With the increase of Ni wire feeding speed, the phase transition temperatures of NiTi alloys decreased monotonously, and the acicular martensites in the samples changed to coarse columnar austenites . The depositions exhibited a single reversible martensitic transformation with Ni content ranging from 50 at. % to 51.2 at. %. The mechanical properties of the samples varied with Ni contents and the test directions. In addition, the finely dispersed Ni 4 Ti 3 phases in the Ni 51.2 sample significantly increased the dislocation slip resistance of the matrix, resulting in a superelastic recovery rate of 75.4 % at 5 % pre-strain. However, with the further increase of Ni content, the critical stress of martensitic transformation at room temperature was also enhanced, leading to premature fracture under high-stress conditions. This work provides an effective method for rapid preparation of NiTi alloys with different phase transition temperatures and functional properties.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Shape Memory Alloy Transformations · High Entropy Alloys Studies · Titanium Alloys Microstructure and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (69)
Show source-provided references
1. Solid-state welding of nitinol shape memory alloys: a review
2. Advancing engineering frontiers with NiTi shape memory alloys: a multifaceted review of properties, fabrication, and application potentials10.1016/j.jallcom.2023.173227 ↗
3. Towards applications, processing and advancements in shape memory alloy and its composites10.1016/j.jmapro.2020.09.048 ↗
4. Innovations in additive manufacturing of shape memory alloys: alloys, microstructures, treatments, applications10.1016/j.jmrt.2024.08.213 ↗
5. Phase transformation behavior and mechanical properties of NiTi shape memory alloys fabricated by directed laser deposition10.1016/j.msea.2024.146693 ↗
6. An atomistic study of effects of temperature and Ni element on the phase transition and wear behavior of NiTi shape memory alloy10.1016/j.triboint.2024.109309 ↗
7. Surface modified NiTi smart biomaterials: surface engineering and biological compatibility
8. Welding and joining of NiTi shape memory alloys: a review10.1016/j.pmatsci.2017.04.008 ↗
9. Manufacturing and processing of NiTi implants: a review10.1016/j.pmatsci.2011.11.001 ↗
10. Phase transformation behavior of NiTi triply periodic minimal surface lattices fabricated by laser powder bed fusion
11. Additive manufacturing of NiTi shape memory alloy and its industrial applications10.1016/j.heliyon.2023.e23369 ↗
12. Effects of scanning strategy and scanning speed on microstructures and mechanical properties of NiTi alloys by laser powder bed fusion10.1016/j.msea.2024.147115 ↗
13. Microstructural and surface analysis of NiTi TPMS lattice sections fabricated by laser powder bed fusion10.1016/j.jmapro.2023.07.055 ↗
14. Functional graded NiTi manufactured with powder bed fusion10.1007/s40964-024-00584-2 ↗
15. Influence of substrate temperature on structure and functional properties of NiTi walls produced by WAAM10.1007/s12666-023-03193-9 ↗
16. Additive manufacturing of shape memory alloys: a review with emphasis on powder bed systems10.1016/j.matdes.2021.109654 ↗
17. Superelastic and robust NiTi alloys with hierarchical microstructures by laser powder bed fusion
18. The interaction effect of process parameters on the phase transformation behavior and tensile properties in additive manufacturing of Ni-rich NiTi alloy10.1016/j.jmapro.2022.03.027 ↗
19. On the effect of the processing parameters in microstructure and thermomechanical properties of LPBF NiTi shape memory alloys10.1016/j.jmrt.2024.09.155 ↗
20. The role of softening in elastic constant c44 in martensitic transformation10.1016/S1359-6462(98)00078-5 ↗
21. A comparative study of elastic constants of Ti–Ni-based alloys prior to martensitic transformation10.1016/S0921-5093(00)01876-1 ↗
22. Effect of laser energy density on the phase transformation behavior and functional properties of NiTi shape memory alloy by selective laser melting10.1016/j.jallcom.2024.176060 ↗
23. On the effects of selective laser melting process parameters on microstructure and thermomechanical response of Ni-rich NiTi10.1016/j.actamat.2017.10.072 ↗
24. On the transformation behavior of NiTi shape-memory alloy produced by SLM10.1007/s40830-016-0083-y ↗
25. Ni-loss compensation and thermomechanical property recovery of 3D printed NiTi alloys by pre-coating Ni on NiTi powder
26. Microstructure evolution and shape memory function mechanism of NiTi alloy by electron beam 4D printing
27. Additive manufacturing based on welding arc: a low-cost method10.1134/S1027451017060210 ↗
28. Additive manufacturing nickel-aluminum bronze alloy via wire-fed electron beam directed energy deposition: enhanced mechanical properties and corrosion resistance compared to as-cast counterpart10.1016/j.jmrt.2024.08.198 ↗
29. Solidification characterization and its correlation with the mechanical properties and functional response of NiTi shape memory alloy manufactured by electron beam freeform fabrication
30. Evolution of transformation behavior and tensile functional properties with process parameters for electron beam wire-feed additive manufactured NiTi shape memory alloys10.1016/j.msea.2022.142977 ↗
31. Electron beam freeform fabrication of NiTi shape memory alloys: crystallography, martensitic transformation, and functional response10.1016/j.msea.2022.143135 ↗
32. Tuning the microstructure, martensitic transformation and superelastic properties of EBF3-fabricated NiTi shape memory alloy using interlayer remelting10.1016/j.matdes.2022.110886 ↗
33. Location dependence of microstructure, phase transformation temperature and mechanical properties on Ni-rich NiTi alloy fabricated by wire arc additive manufacturing10.1016/j.msea.2019.02.029 ↗
34. Comparative study on crystallographic orientation, precipitation, phase transformation and mechanical response of Ni-rich NiTi alloy fabricated by WAAM at elevated substrate heating temperatures10.1016/j.msea.2020.140307 ↗
35. Evolution of crystallographic orientation, precipitation, phase transformation and mechanical properties realized by enhancing deposition current for dual-wire arc additive manufactured Ni-rich NiTi alloy
36. Microstructure and mechanical properties of Ni50.8Ti49.2 and Ni53Ti47 alloys prepared in situ by wire-arc additive manufacturing10.1016/j.jmatprotec.2022.117631 ↗
37. Impurity levels and fatigue lives of pseudoelastic NiTi shape memory alloys10.1016/j.actamat.2013.02.054 ↗
38. Study on the NiTi shape memory alloys in-situ synthesized by dual-wire-feed electron beam additive manufacturing
39. Microstructure evolution and functional response of NiTi shape memory alloy manufactured by dual-wire electron beam freeform fabrication10.1016/j.jmapro.2024.03.089 ↗
40. Formation mechanism of Ni2Ti4Ox in NITI shape memory alloy10.1016/j.mtla.2018.100194 ↗
41. Study on the role of carbon in modifying second phase and improving tensile properties of NiTi shape memory alloys fabricated by electron beam directed energy deposition
42. High-strength porous NiTi shape memory alloys with stable cyclic recovery properties fabricated using elemental powders10.1016/j.msea.2023.145682 ↗
43. Influence of Ni on martensitic phase transformations in NiTi shape memory alloys10.1016/j.actamat.2010.02.019 ↗
44. Laser Powder Bed Fusion of Ti-rich TiNi lattice structures: process optimisation, geometrical integrity, and phase transformations10.1016/j.ijmachtools.2019.04.002 ↗
45. Texture and anisotropy in selective laser melting of NiTi alloy10.1016/j.msea.2015.10.032 ↗
46. Physical metallurgy of Ti-Ni-based shape memory alloys10.1016/j.pmatsci.2004.10.001 ↗
47. Tuning the functional properties by laser powder bed fusion with partitioned repetitive laser scanning: toward editable 4D printing of NiTi alloys10.1016/j.jmapro.2023.07.009 ↗
48. Transformation pseudoelasticity and deformation behavior in a Ti-50.6at%Ni alloy10.1016/0036-9748(81)90346-X ↗
49. Microstructures and mechanical properties of NiTi shape memory alloys fabricated by wire arc additive manufacturing10.1016/j.jallcom.2021.162193 ↗
50. Microstructure, phase transformation behavior and tensile superelasticity of NiTi shape memory alloys fabricated by the wire-based vacuum additive manufacturing10.1016/j.msea.2021.141077 ↗
51. Modulation of characteristic zones in NiTi alloys fabricated via wire arc additive manufacturing10.1016/j.matchar.2024.113694 ↗
52. High superelasticity NiTi fabricated by cold metal transfer based wire arc additive manufacturing10.1016/j.msea.2022.143001 ↗
53. Wire and arc additive manufacturing of a Ni-rich NiTi shape memory alloy: microstructure and mechanical properties
54. Effect of post-heat treatments on the microstructure, martensitic transformation and functional performance of EBF3-fabricated NiTi shape memory alloy10.1016/j.msea.2023.144897 ↗
55. Prominent superelastic response induced by Ni4Ti3 phase in NiTi alloys fabricated via wire-arc directed energy deposition10.1016/j.msea.2024.146366 ↗
56. Improvement of tensile superelasticity by aging treatment of NiTi shape memory alloys fabricated by electron beam wire-feed additive manufacturing10.1016/j.jmst.2022.10.050 ↗
57. New modelling of the B2 phase and its associated martensitic transformation in the Ti-Ni system10.1016/S1359-6454(99)00193-7 ↗
58. Microstructure and elastocaloric effect of NiTi shape memory alloy in-situ synthesized by laser directed energy deposition additive manufacturing10.1016/j.matchar.2024.113831 ↗
59. Ni4Ti3-precipitation during aging of NiTi shape memory alloys and its influence on martensitic phase transformations10.1016/S1359-6454(02)00257-4 ↗
60. In-situ formation of Ni4Ti3 precipitate and its effect on pseudoelasticity in selective laser melting additive manufactured NiTi-based composites10.1016/j.apsusc.2018.01.317 ↗
61. Effect of laser energy density on the evolution of Ni4Ti3 precipitate and property of NiTi shape memory alloys prepared by selective laser melting10.1016/j.jallcom.2021.159338 ↗
62. Ultrahigh-performance TiNi shape memory alloy by 4D printing10.1016/j.msea.2019.138166 ↗
63. Selective electron beam melting of NiTi: microstructure, phase transformation and mechanical properties10.1016/j.msea.2018.12.023 ↗
64. Plastic deformation of NiTi shape memory alloys10.1016/j.actamat.2012.09.023 ↗
65. In-situ synthesis of high-quality pseudoelastic NiTi alloys with intrinsic Ni4Ti3 phase precipitation using laser DED10.1016/j.jmapro.2021.12.029 ↗
66. Study of the microstructure evolution of heat treated Ti-rich NiTi shape memory alloy10.1016/j.matchar.2015.11.017 ↗
67. Stable tensile recovery strain induced by a Ni4Ti3 nanoprecipitate in a Ni50.4Ti49.6 shape memory alloy fabricated via selective laser melting10.1016/j.actamat.2021.117261 ↗
68. Criteria for pseudoelasticity in near-equiatomic NiTi shape memory alloys10.1016/S1359-6454(97)00144-4 ↗
69. Effects of grain size and partial amorphization on elastocaloric cooling performance of nanostructured NiTi10.1016/j.scriptamat.2021.114371 ↗