The microstructure and mechanical properties of electron beam welded Ti2AlNb-based alloy joint with the addition of TiB2
Source abstract
Abstract
In this paper, 5mm thick Ti-22Al-25Nb alloy plate was used for vacuum electron beam welding. The effect of TiB2 on the surface forming, macroscopic morphology, microstructure and mechanical properties of the joint was studied by optical microscope, scanning electron microscope and X-ray diffractometer. The results show that TiB2 has an obvious effect on the microstructure and mechanical properties. The surface forming of the joint is good with the addition of TiB2, while the lower surface of the joint without the addition of TiB2 is discontinuous and presents a droplet state. The phase of WZ with TiB2 is composed of B2 phase, TiB and a small amount of O phase, while it mainly consists of B2 phase for the joint without addition of TiB2. The hardness of the WZ with different addition of TiB2 is higher than that of the WZ without addition of TiB2. The breaking strength at high temperature of the joint without addition of TiB2 is 639MPa, which is only 72.5% of the BM and lower than that of the joint with different addition of TiB2.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · Advanced Welding Techniques Analysis · Titanium Alloys Microstructure and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. Recent advances in the development of aerospace materials10.1016/j.paerosci.2018.01.001 ↗
2. Phase transformation and microstructure control of Ti2AlNb-Based alloys: a review10.1016/j.jmst.2020.11.022 ↗
3. Research and prospect of Ti2AlNb alloy. T. Nonferr
4. Microstructure and mechanical properties of laser welded Ti-22Al-27Nb and TC4 dissimilar alloys10.1016/j.msea.2012.09.057 ↗
5. Transient liquid phase (TLP) bonding of Ti2AlNb alloy using Ti/Ni interlayer: microstructure characterization and mechanical properties10.1016/j.jallcom.2016.03.286 ↗
6. Microstructure evolution and mechanical properties of linear friction welded Ti2AlNb alloy10.1016/j.jallcom.2015.05.198 ↗
7. Microstructure and properties of the TiAl/GH3030 dissimilar joints vacuum-brazed with a Ti-based amorphous filler metal10.1016/j.matchar.2023.113520 ↗
8. Advancements in diffusion barrier layers based on heterogeneous connection of electrode/thermoelectric materials10.1016/j.jallcom.2024.175185 ↗
9. Effect of N-Cr compounds on the brazing of high nitrogen steel with Ag-based filler metal: first-principles calculation10.1016/j.jmrt.2022.12.198 ↗
10. High cycle fatigue behaviors at high temperatures of a Ti2AlNb-based alloy10.1002/adem.201801045 ↗
11. Microstructural evolution and tensile behavior of Ti2AlNb alloys based α2-phase decomposition
12. The enhanced tensile property by introducing bimodal size distribution of lamellar O for O+B2 Ti2AlNb based alloy
13. Effect of heat distribution on microstructure and mechanical properties of electron beam welded dissimilar TiAl/TC4 joint10.1016/j.jmrt.2020.09.055 ↗
14. Fracture toughness of TA31 titanium alloy joints welded by electron beam welding under constrained condition10.1016/j.msea.2019.138612 ↗
15. Internal tensile properties of characteristic zones in the electron beam weldment of TC17 titanium alloy10.1016/j.msea.2023.145087 ↗
16. Effects of welding parameters on weld shape and residual stresses in electron beam welded Ti2AlNb alloy joints10.1016/S1003-6326(18)64916-7 ↗
17. Microstructure and property of the Ti-24Al-15Nb-1.5Mo/TC11 joint welded by electron beam welding
18. Effect of beam deviation on electron beam welded Ti-22Al-25Nb/TC4 dissimilar alloys10.1007/s40194-020-00859-6 ↗
19. Weldability and microstructure of a titanium aluminide
20. Effect of preheating on the microstructure evolution and mechanical properties of electron beam welded Ti2AlNb alloy10.1007/s11665-022-07346-7 ↗
21. Numerical simulation and experimental investigation on electron beam welding of Ti-22Al-25Nb alloy with electron beam oscillation10.1088/2053-1591/aacb60 ↗
22. Effect of isothermal deformation on microstructure and properties of electron beam welded joint of Ti2AlNb/TC1110.1179/026708310X12756557336238 ↗
23. TiB2 reinforced aluminum based in situ composites fabricated by stircasting10.1016/j.msea.2014.12.033 ↗
24. Effects of welding condition on weld shape and distortion in electron beam welded Ti2AlNb alloy joints10.1016/j.matdes.2016.11.083 ↗
25. A comparative study of microstructure and tensile properties of Ti2AlNb joints prepared by laser welding and laser-additive welding with the addition of filler powder10.1016/j.jmatprotec.2017.12.044 ↗
26. Improvement in microstructure and high-temperature brittleness of laser-welded Ti-22Al-25Nb joints with the addition of TiB2 powder10.1016/j.jmatprotec.2020.116848 ↗
27. Effect of boron microalloying on microstructure, tensile properties and creep behavior of Ti-22Al-20Nb-2W alloy10.1016/S0921-5093(01)01155-8 ↗
28. Microstructure characterization, mechanical properties and toughening mechanism of TiB2-containing conventional cast TiAl-based alloy10.1016/j.msea.2015.07.092 ↗
29. Electron beam welding of Ti2AlNb based alloy sheet
30. Grain refinement by trace TiB2 addition in conventional cast TiAl-based alloy10.1016/j.matchar.2015.05.020 ↗
31. Reinforcing effect of in situ grown TiB fibers on Ti-22Al-11Nb-4Mo alloy10.1016/S1359-6462(00)00435-8 ↗
32. Numerical simulation for full-penetration electron beam welding of Ti2AlNb alloy
33. Effect of hot working on microstructure and mechanical properties of TC11/Ti2AlNb dual-alloy joint welded by electron beam welding process10.1016/S1003-6326(14)63494-4 ↗
34. Static coarsening behavior of a pre-deformed Ti2AlNb-based alloy during heat treatment10.1016/j.vacuum.2019.108934 ↗
35. Microstructure and mechanical properties of electron beam welded joints of Ti2AlNb alloy10.1007/s11665-022-07514-9 ↗
36. The effect of annealing on microstructure and tensile properties of Ti-22Al-25Nb electron beam weld joint10.1016/j.intermet.2016.02.006 ↗
37. Effect of Ta microalloying on joint performance by tailoring the microstructure during laser beam welding of Ti-22Al-27Nb10.1016/j.msea.2022.143157 ↗
38. Effect of Ti-Hf-Zr-Cu-Ni high entropy alloy addition on laser beam welded joint of Ti2AlNb based intermetallic alloy10.1016/j.jmst.2021.12.036 ↗