Achievement of heat treatment strengthening in phosphor bronze through semi-coherent precipitation
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Advanced materials and composites · Intermetallics and Advanced Alloy Properties · Surface Treatment and Coatings
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. A DSC analysis of thermodynamic properties and solidification characteristics for binary Cu-Sn alloys10.1016/j.actamat.2012.08.013 ↗
2. Development of wear resistant Cu-12Sn-1.5Ni alloy via minor addition of Fe during casting process10.1016/j.apsusc.2021.151623 ↗
3. Co and Ti effect on hot workability of phosphor bronze10.1016/j.jallcom.2022.163778 ↗
4. Behaviour of leaded tin bronze in simulated seawater in the absence and presence of tribological contact with alumina counterbody: corrosion, wear and tribocorrosion10.1016/j.triboint.2018.08.021 ↗
5. Selective laser melting of Cu-10Sn-0.4P: processing, microstructure, properties, and brief comparison with additively manufactured Cu-10Sn10.1002/adem.202100716 ↗
6. Material selection in the design of electrical connectors10.1016/j.jmatprotec.2004.04.209 ↗
7. Evolution of microstructure and grain boundary character distribution of a tin bronze annealed at different temperatures10.1016/j.matchar.2016.02.022 ↗
8. The deformation compatibility and recrystallisation behaviour of the alloy CuSn10P110.1016/j.matchar.2021.110940 ↗
9. Implication of peritectic composition in historical high-tin bronze metallurgy10.1016/j.matchar.2009.05.009 ↗
10. Effects of Sn content and hot deformation on microstructure and mechanical properties of binary high Sn content Cu-Sn alloys10.1016/j.msea.2020.140054 ↗
11. Characterization and tribological properties of micro-dent arrays produced by laser peening on ZCuSn10P1 alloy
12. Strengthening and hardening mechanisms of additively manufactured stainless steels: the role of cell sizes10.1016/j.scriptamat.2019.10.005 ↗
13. Influence of pore characteristics and eutectic particles on the tensile properties of Al–Si–Mn–Mg high pressure die casting alloy10.1016/j.msea.2020.139280 ↗
14. Multi-material additive manufacturing: a systematic review of design, properties, applications, challenges, and 3D printing of materials and cellular metamaterials10.1016/j.matdes.2023.111661 ↗
15. Incremental solidification (toward 3D-printing) of metal powders by transistor-based microwave applicator10.1016/j.matdes.2019.108234 ↗
16. Additive manufacturing of Cu-10Sn bronze10.1016/j.matlet.2015.05.076 ↗
17. Mechanical, thermal, and corrosion properties of Cu-10Sn alloy prepared by laser-powder-bed-fusion additive manufacturing
18. Evolution of microstructures and properties of SLM-manufactured Cu-15Ni-8Sn alloy during heat treatment
19. Effect of high pressure die casting on the castability, defects and mechanical properties of aluminium alloys in extra-large thin-wall castings10.1016/j.jmatprotec.2022.117525 ↗
20. Alloy design strategies to increase strength and its trade-offs together10.1016/j.pmatsci.2020.100720 ↗
21. Microstructures and properties of Ni-Si precipitation strengthened phosphor bronze10.1016/j.jallcom.2023.169388 ↗
22. CALPHAD-guided alloy design of Bi-modified Al–Sn bearing alloy with multiphase composite structure and optimal self-lubricating property10.1016/j.jallcom.2021.159756 ↗
23. Morphological and mechanical behaviour of Cu-Sn alloys-a review10.1007/s12540-020-00899-z ↗
24. Tribological behavior of the bronze–steel pair for worm gearing10.1016/j.wear.2013.01.058 ↗
25. Microstructure and properties of tin bronzes produced by the SPD method10.24425/amm.2019.126223 ↗
26. Determination on the effect of Ti addition on the microstructural, mechanical and wear behavior of Cu–6Sn alloy in as—cast condition10.1007/s12666-019-01835-5 ↗
27. Extra-ductile and strong tin bronze alloy via high-density intragranular ultra-nano precipitation with minimal lattice misfit10.1016/j.scriptamat.2023.115535 ↗
28. Mechanical properties and fracture behavior in copper-brass heterostructured fibers10.1016/j.msea.2023.145922 ↗
29. Slow strain rate tensile tests on notched specimens of as-cast pure Cu and Cu-Fe-Co alloys10.1016/j.jallcom.2020.153647 ↗
30. Quantifying dislocation density in Al-Cu coatings produced by cold spray deposition10.1016/j.actamat.2020.04.040 ↗
31. X-ray line broadening from filed aluminium and wolfram10.1016/0001-6160(53)90006-6 ↗
32. Effect of cold rolling on aging precipitation behavior and mechanical properties of Cu-15Ni-8Sn alloy10.1016/j.jallcom.2020.156275 ↗
33. Strengthening in rapidly solidified age hardened Cu-Cr and Cu-Cr-Zr alloys10.1016/S1359-6454(96)00142-5 ↗
34. Annealing hardening and softening of an ultrafine grained Cu-4.5vol.%Al2O3 nanocomposite10.1016/j.msea.2020.139126 ↗
35. Controlled formation of coherent cuboidal nanoprecipitates in body-centered cubic high-entropy alloys based on Al2(Ni,Co,Fe,Cr)14 compositions10.1016/j.actamat.2018.01.050 ↗
36. Investigation of multi-phase strengthened Ni36Co30Cr11Fe11Al8Ta4 high entropy alloy prepared by directional solidification10.1016/j.msea.2023.145800 ↗
37. Microstructural evolution and mechanical properties of low SFE Cu-Al alloys processed by cryorolling followed by short-annealing10.1016/j.matdes.2016.03.095 ↗
38. Optimization of strength and ductility in an as-extruded Cu–15Ni–8Sn alloy by the additions of Si and Ti10.1016/j.jallcom.2020.153759 ↗
39. Substitutional solution hardening10.1016/0001-6160(63)90213-X ↗
40. Dislocation-induced stop-and-go kinetics of interfacial transformations10.1038/s41586-022-04880-1 ↗
41. Laser shock peening-induced misfit dislocation at interfaces between HCP and BCC crystals of Ti6Al4V alloy and the corresponding dislocation patterns in two phases10.1016/j.surfcoat.2022.128513 ↗
42. Designing L21-Co2TiAl precipitate-strengthened ferritic alloys with excellent high-temperature mechanical properties10.1016/j.msea.2023.145984 ↗
43. Strengthening mechanisms of semi-coherent boundaries between Al8Mn4Y and the Mg matrix in magnesium alloys10.1016/j.msea.2023.145713 ↗