Development and characterisation of novel Cr-based hardmetals strengthened by nanosized tungsten carbide
Source abstract
Abstract
Abstract This work highlights the promising mechanical properties and oxidation resistance achieved by novel Cr-based WC hardmetals having nanosized tungsten carbide grains, designed by combining thermodynamic calculations and experimental evaluation. The hardmetals are processed by a powder metallurgy route including mechanical milling of powders and subsequent consolidation by spark plasma sintering. The effect of the addition of different extra Fe and C contents on microstructure, mechanical properties, and oxidation resistance is fully investigated. Thus, the best mechanical performance is achieved when the formation of brittle ŋ-phases, M7C3 carbides and soft graphite is reduced or suppressed, while maintaining the nanosized WC grain size. More specifically, the Cr-based WC hardmetal with an extra 3 wt% Fe content and extra 0.5 wt% C content reaches the best combination of hardness and toughness fracture values (2219 HV30 and 8.2 MPam1/2). In addition, the oxidation resistance reached is higher than that of conventional Co-based or Ni-based WC hardmetals tested under the same conditions turning them into promising candidates for applications under aggressive oxidation environments.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced materials and composites · Advanced ceramic materials synthesis · Diamond and Carbon-based Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. Microstructures of cemented carbides10.1016/S0261-3069(01)00006-1 ↗
2. Environmental carcinogenic substances, exposure and risk assessment for carcinogenci potential. classifications and regulations by international and national institutions
3. Aspects of sintering of cemented carbides with Fe-based binders10.1016/j.ijrmhm.2014.07.028 ↗
4. Control of WC grain sizes and mechanical properties in WC-FeAl composite fabricated from vacuum sintering technique10.1016/j.ijrmhm.2014.11.007 ↗
5. Abrasive wear resistance of WC-Co and WC-AISI 304 composites by ball-cratering method10.1016/j.wear.2015.11.005 ↗
6. Corrosion behaviour of WC-10 % AISI 304 cemented carbides10.1016/j.corsci.2015.08.006 ↗
7. Trends in the P/M hard metal industry10.1016/j.ijrmhm.2014.07.007 ↗
8. Advanced and new grades of WC and binder powder-their properties and application10.1016/S0263-4368(00)00002-0 ↗
9. Microstructure, hardness and toughness of nanostructured and conventional WC-Co composites10.1016/S0965-9773(98)00123-8 ↗
10. Synthesis, sintering, and mechanical properties of nanocrystalline cemented tungsten carbide - a review10.1016/j.ijrmhm.2008.07.011 ↗
11. Production of nanometric tungsten carbide powders by planetary milling
12. L. E. McCandlish, B. H. Kear, S. J. Bhatia, Spray Conversion Process for the Production of Nanophase Composite Powders. Patent No. 5352269. Washington DC US 1994.
13. Preparation and structure of bulk nanostructured WC-Co alloy by high energy ball-milling10.1023/A:1018525213450 ↗
14. Rapid sintering of ultra fine WC and WC-Co hard materials by high-frequency induction heated sintering and their mechanical properties10.1007/BF03027821 ↗
15. Nanocrystalline cemented carbides sintered by the pulse plasma method10.1016/j.ijrmhm.2006.03.007 ↗
16. Fracture toughness of cemented carbides obtained by electrical resistance sintering10.1016/j.ijrmhm.2019.02.002 ↗
17. Production of ultrafine grained hardmetals by electrical resistance sintering10.3390/met9020159 ↗
18. Hard metal production by ERS: processing parameter roles in final properties10.3390/met9020172 ↗
19. Spark plasma sintering behavior of nanocrystalline WC-10Co cemented carbide powders10.1016/S0921-5093(02)00605-6 ↗
20. Preparation of nanocrystalline WC-10Co-0.8 VC by spark plasma sintering10.1023/A:1026357129534 ↗
21. Effects of scale combination and contact condition of raw powders on SPS sintered near-nanocrystalline WC-Co alloy10.1016/j.msea.2007.04.094 ↗
22. Hardness to toughness relationship of fine-grained hardmetals WC-Co10.1016/S0263-4368(98)00028-6 ↗
23. Development of a Cr-based hard composite processed by spark plasma sintering10.1007/s11661-018-4477-7 ↗
24. Cemented carbide phase diagrams: a review10.1016/j.ijrmhm.2011.02.004 ↗
25. Sintering, microstructure and properties of WC-AISI304 powder composites10.1016/j.jallcom.2013.02.013 ↗
26. Field-assisted sintering of WC hardmetals with Cr-based binder
27. Determination of the average grain size of cemented carbides10.1016/S0263-4368(03)00005-2 ↗
28. The reflection of X-rays by crystals10.1098/rspa.1913.0040 ↗
29. The Scherrer equation versus the ‘Debye-Scherrer equation10.1038/nnano.2011.145 ↗
30. Fracture toughness of cemented carbides: testing method and microstructural effects10.1016/j.ijrmhm.2014.08.018 ↗
31. Oxidation of WC-Co, WC-Ni and WC-Co-Ni hard metals in the temperature range 500~800 °C10.1016/0263-4368(96)00009-1 ↗
32. Isoconversional methods fundamentals, meaning and application10.1023/B:JTAN.0000027811.80036.6c ↗
33. Mechanically alloyed AlN particle-reinforced Al-6061 matrix composites: powder processing, consolidation and mechanical strength and hardness of the as-extruded materials10.1016/j.msea.2006.03.074 ↗
34. Nanostructured WC/Co composite powder prepared by high energy ball milling10.1016/j.scriptamat.2003.08.009 ↗
35. Formation of nanocrystalline phases in sol-gel masses in the Fe-W-C(O) system and densification up to 1100 oC10.1016/j.mspro.2012.06.013 ↗
36. Diffusion and solubility of Cr in WC10.1016/j.jallcom.2009.09.137 ↗
37. Ab initio study of magnetic structure and chemical reactivity of Cr2O3 and its (0001) surface10.1021/jp9943474 ↗
38. Chromium oxide coatings applied to magnetic tape heads for improved wear resistance10.1016/S0301-679X(02)00214-1 ↗
39. Ultra-thin Cr2O3 well-crystallized films for high transmittance APSM in ArF line10.1016/S0167-9317(03)00179-5 ↗
40. Thermodynamics of the tungsten-oxygen system
41. Liquid phase sintering and oxidation resistance of WC-Ni-Co-Cr cemented carbides10.1016/j.ijrmhm.2010.02.010 ↗
42. Comparison of the oxidation behaviour of WC-Co and WC-Ni-Co-Cr cemented carbides10.1016/j.corsci.2011.05.006 ↗