journal article·2022-10

Diffusionless α′ to γ transformation and its effect on hot ductility in a high-nickel steel

Seonguk Huh, Sang-Hum Kwon, Jae-Sang Lee, Jun-Yun Kang, Yoon-Uk Heo, Chang-Hee Yim

Publisher page

Abstract

An electron probe X-ray microanalyzer (EPMA) is an essential tool for studying chemical composition distribution in the microstructure. Quantifying chemical composition using standard specimens is commonly used to determine the composition of individual phases. However, the local difference in chemical composition in the standard specimens brings the deviation of the quantified composition from the actual one. This study introduces how to overcome the error of quantification in EPMA in the practical aspect. The obtained results are applied to evaluate the chemical composition of retained austenite in multi-phase steel. Film-type austenite shows higher carbon content than blocky-type one. The measured carbon contents of the retained austenite show good coherency with the calculated value from the X-ray diffraction. ; 1 ; 1 ; N ; scie ; scopus
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · High Temperature Alloys and Creep · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. LNG import diversification and energy security in Asia10.1016/j.enpol.2019.01.073 ↗
2. Analysis of hook formation mechanism in ultra low carbon steel using CON1D heat flow -solidification model
3. Hot ductility of steels and its relationship to the problem of transverse cracking during continuous casting10.1179/imr.1991.36.1.187 ↗
4. Characteristics of embrittlement in steels above 600° C10.2355/tetsutohagane1955.65.14_2038 ↗
5. Embrittlement mechanism in a low-carbon steel at intermediate temperature, Mater10.1016/j.matchar.2019.01.009 ↗
6. Behavior of non-metallic inclusions in steel during hot deformation and the effects of deformed inclusions on local ductility10.2355/isijinternational.51.1987 ↗
7. Coherent to incoherent transition of precipitates during rupture test in TP347H austenitic stainless steels10.1016/j.matchar.2016.03.018 ↗
8. Impurities segregation to grain boundary carbide interfaces and grain boundaries and the mechanism of elevated temperature intergranular cracking in heat-resistant steel10.2355/isijinternational.50.1702 ↗
9. Extended Hall–petch relationships for yield, cleavage and intergranular fracture strengths of bcc steel and its deformation and fracture behaviors10.1007/s12540-018-0026-6 ↗
11. Surface segregation in low carbon steels10.1016/0921-5093(94)91087-1 ↗
12. Disorder-induced melting in nickel: implication to intergranular sulfur embrittlement10.1016/S0022-3115(02)00707-9 ↗
13. Grain boundary segregation engineering in metallic alloys: a pathway to the design of interfaces10.1016/j.cossms.2014.06.002 ↗
14. Effects of segregation on grain-boundary cohesion: a density-functional cluster model of boron and sulfur in nickel10.1103/PhysRevLett.58.234 ↗
15. Intergranular segregation and crystallographic parameters of grain boundaries in nickel-sulfur system10.1016/0036-9748(86)90417-5 ↗
16. Segregation to interfaces
17. Grain boundary decohesion by sulfur segregation in ferromagnetic iron and nickel - a first-principles study10.2320/matertrans.47.2682 ↗
18. Origin of intergranular fracture in martensitic 8Mn steel at cryogenic temperatures10.1016/j.scriptamat.2013.05.042 ↗
19. Influence of sulfur, phosphorus, and antimony segregation on the intergranular hydrogen embrittlement of nickel10.1007/BF02651619 ↗
20. Effect of interfacial sulfur segregation on the hot ductility drop of Fe-Ni36 alloys10.1016/0956-7151(91)90044-2 ↗
21. Correlation between MnS precipitation, sulfur segregation kinetics, and hot ductility in C-Mn steel10.1007/s11661-014-2532-6 ↗
22. Formation of secondary austenite during the α′-γ transformation in an FeNiMn alloy10.1016/0025-5416(87)90428-9 ↗
23. The effects of the heating rate on the reverse transformation mechanism and the phase stability of reverted austenite in medium Mn steels10.1016/j.actamat.2013.12.038 ↗
24. Microstructural evaluation of austenite reversion during intercritical annealing of Fe-Ni-Mn martensitic steel10.1016/j.jallcom.2012.02.015 ↗
25. A dilatometric study of the continuous heating transformations in 18wt.% Ni maraging steel of grade 35010.1016/S0921-5093(02)00934-6 ↗
26. On the stability of reversely formed austenite and related mechanism of transformation in an Fe-Ni-Mn martensitic steel aided by electron backscattering diffraction and atom probe tomography10.1007/s11661-017-4288-2 ↗
27. Austenite memory during reverse transformation of steels at different heating rates10.1016/j.mtla.2019.100409 ↗
28. Microstructure evolution during austenite reversion in Fe-Ni martensitic alloys10.1016/j.actamat.2017.10.068 ↗
29. Recrystallization of the austenite transformed reversely and structure of martensite in 18Ni maraging steel10.2355/tetsutohagane1955.65.10_1598 ↗
30. McLean · 1957
31. Grain boundary segregation and the T-t dependence of temper brittleness10.1016/0001-6160(77)90153-5 ↗
32. An advanced approach to reconstructing parent orientation maps in the case of approximate orientation relations: application to steels10.1016/j.actamat.2012.04.034 ↗
33. Application of Newton's method for precise calculation of parent orientation and orientation relationship from orientations of daughter phase10.1016/j.matchar.2017.08.007 ↗
34. Accurate measurement of the orientation relationship of lath martensite and bainite by electron backscatter diffraction analysis10.1016/j.scriptamat.2009.02.053 ↗
35. Lejček · 2010
36. Gale · 2004
37. Grain boundary embrittlement by Mn and eutectoid reaction in binary Fe-12Mn steel10.1016/j.actamat.2013.03.016 ↗