Assessment of the reinforcing system and carbides evolution in hot isostatically pressed astroloy after prolonged exposure at 820°C
Source abstract
Abstract
Abstract Hot Isostatic Pressing (HIP) is a powder metallurgy technique which densifies metallic powders via the contemporary application of high temperature and pressure. Such manufacturing route demonstrated highly efficient to produce components made of material with low forgeability or castability such as the Ni-based superalloys. Such materials are designed to withstand very high temperatures, which typically are met in aeronautical engines. Despite Astroloy, the Ni-based superalloy studied in the following work, is designed to work in the temperature range of 650–760 °C, only few research papers discussed its thermal stability in depth. In this work, the thermal stability of the alloy was studied in a more demanding condition, i.e., at 820 °C for 200 h. This experimental condition was chosen to assess the effects of repeated exposures of a component above the standard operating temperature. The over-ageing treatment applied to the alloy severely altered its microstructure, causing γ’ coarsening and second phases precipitation. More precisely, σ phase and M23C6 carbides precipitated inside and at the grain boundaries respectively. Nano-indentation trials and tensile tests at high temperature were used to assess how these microstructural alterations impacted on mechanical properties of the material. The main conclusions are: only a slight lowering of tensile properties and a strong increase of ductility was measured after tensile test up to 760 °C, as well as an higher reduction of both tensile properties and ductility when sample were tested at 820 °C.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Temperature Alloys and Creep · Metallurgical Processes and Thermodynamics · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (54)
Show source-provided references
1. Gessinger · 1984
2. Driver · 2010
3. Rolls-Royce · 1996 · 292
4. Long -term growth of superalloy y’ particles10.1007/BF00540433 ↗
5. C. Bampton, W. Goodin, T. Van Daam, G. Creeger, S. James, Net-Shape HIP Powder Metallurgy Components for Rocket Engines, (n.d.).
6. Modeling of materials behavior at various temperatures of hot isostatically pressed superalloys10.1016/j.msea.2012.02.005 ↗
7. Production of net-shape static parts by direct HIPing of nickel base superalloy prealloyed powders10.4028/www.scientific.net/AMR.278.277 ↗
8. Chang · 1984 · 245
9. The effect of strain distribution on microstructural developments during forging in a newly developed nickel base superalloy10.1016/j.msea.2015.12.042 ↗
10. Recrystallization of the hot isostatic pressed nickel-base superalloy FGH4096. II: characterization and application10.1016/j.msea.2012.01.065 ↗
11. Rao · 2003 · vol. 355 · 114
12. Kissinger · 1984 · 285
13. Brunetaud · 1982
14. Parameters influencing particle boundary precipitation in superalloy powders
15. E. Bassini, V. Vola, M. Lorusso, R. Ghisleni, M. Lombardi, S. Biamino, G. Vallillo, B. Picqué, Net Shape HIPping of Ni-Superalloy : Study of the Interface between the Capsule and the Alloy Keywords 1 Introduction 2 Methods 2 . 1 Material and Sample Preparation, (n.d.) 1–19.
16. Hot isostatically pressed Alloy APK1 , a nickel-base superalloy10.1179/pom.1977.20.2.84 ↗
17. Ni-based superalloys for turbine discs
18. Assessment of Russian P/M superalloy EP741NP
19. Study on direct hot isostatic pressing technology for superalloy inconel 62510.4028/www.scientific.net/AMR.189-193.2935 ↗
20. Influence of solutioning on microstructure and hardness of hot isostatically pressed Astroloy10.1016/j.jallcom.2017.06.332 ↗
21. Net shape HIPping of a Ni-superalloy: a study of the influence of an as-leached surface on mechanical properties10.1016/j.jmatprotec.2019.04.027 ↗
22. Study of the E ff ects of aging treatment on astroloy processed via hot isostatic pressing10.3390/ma12091517 ↗
23. Influence of composition and cooling rate on constrained and unconstrained lattice parameters in advanced polycrystalline nickel-base superalloys10.1016/j.msea.2006.02.039 ↗
24. Grain growth and particle pinning in a model Ni-based superalloy10.1016/j.msea.2007.09.055 ↗
25. Effect of long-term aging on the fatigue crack growth rate of a nickel-based superalloy10.1016/j.msea.2010.11.044 ↗
26. Effects of heat treatment on prior particle boundary precipitation in a powder metallurgy nickel base superalloy10.1007/BF00705449 ↗
27. Microstructure and stress-rupture life of high W-content cast Ni-based superalloy after 1000–1100 °C thermal exposures10.1016/j.msea.2018.04.037 ↗
28. Microstructural evolution and hardness of a heat resistant alloy during long term aging at 700 °C10.1016/j.jallcom.2018.05.263 ↗
29. Gamma prime (γ’) precipitating and ageing behaviours in two newly developed nickel-base superalloys10.1023/A:1018672107071 ↗
30. Effect of microstructure and temperature on high cycle fatigue of powder metallurgy astroloy10.1016/0921-5093(90)90147-U ↗
31. Gamma prime coarsening and age-hardening behaviors in a new nickel base superalloy10.1016/j.matlet.2003.10.053 ↗
32. The effect of volume fraction of precipitate on ostwald ripening10.1016/0001-6160(80)90067-X ↗
33. Application of a modified Ostwald ripening theory in coarsening of γ′ phases in Ni based single crystal superalloys10.1016/j.jallcom.2015.01.215 ↗
34. Microstructure of carbides at grain boundaries in nickel based superalloys10.1016/S1005-0302(12)60169-8 ↗
35. Thermal evolution behavior of carbides and γ’ precipitates in FGH96 superalloy powder10.1016/j.matchar.2012.02.014 ↗
36. The effect of long-term service exposure on the stability of carbides in Co–Cr–Ni–W (X-45) superalloy10.1016/j.engfailanal.2017.11.018 ↗
37. Precipitation behavior of grain boundary M23C6 and its effect on tensile properties of Ni–Cr–W based superalloy10.1016/j.msea.2012.03.092 ↗
38. Study of the microstructure and cracking mechanisms of hastelloy X produced by laser powder bed fusion10.3390/ma11010106 ↗
39. Microstructural evolution of an experimental third generation single crystal superalloy after long-term thermal exposure at 1100 °C10.1016/S1875-5372(17)30111-X ↗
40. Effect of chemical composition on particle morphology of topologically close-packed precipitates in a Ni-based single crystal superalloy10.1016/j.scriptamat.2018.07.041 ↗
41. Minimum interface misfit criterion for the precipitation morphologies of TCP phases in a Ni-based single crystal superalloy10.1016/j.intermet.2017.12.020 ↗
42. Mechanism of primary MC carbide decomposition in Ni-base superalloys10.1007/s11661-004-0076-x ↗
43. Intergranular cavitation during creep in astroloy
44. Isotropic and kinematic hardening as functions of gamma prime precipitates in a nickel-based superalloy10.1016/j.ijfatigue.2014.05.011 ↗
45. High performance and high complexity net shape parts for gas turbines: the ISOPREC® powder metallurgy process10.1016/S0261-3069(99)00093-X ↗
46. Evolution of PM nickel base superalloy processes and products10.1179/174329008X286631 ↗
47. Assessment of microstructural features and hardness evolution of HIPped astroloy after receiving A complete heat treatment
48. The substitution of nickel for cobalt in hot isostatically pressed powder metallurgy UDIMET 700 alloys10.1007/BF02811669 ↗
49. Relative stability of carbide and intermetallic phases in nickel-base superalloys
50. The effect of long-term thermal exposures on the microstructure and properties of CMSX-10 single crystal Ni-base superalloys10.1016/j.msea.2004.04.001 ↗
51. Effect of aging time at high temperature on microstructural evolution behavior of a nickel-based single crystal superalloy10.1016/S1875-5372(15)30087-4 ↗
52. An investigation of diffusion-mediated cyclic coarsening and reversal coarsening in an advanced Ni-based superalloy10.1016/j.actamat.2016.02.067 ↗
53. Atomic-scale APFIM and TEM investigation of grain boundary microchemistry in astroloy nickel base superalloys10.1016/S1359-6454(96)00087-0 ↗
54. Anomalous yield and intermediate temperature brittleness behaviors of directionally solidified nickel-based superalloy10.1016/S1003-6326(14)63110-1 ↗