A physics-based life prediction model of HP40Nb heat-resistant alloy in a coupled creep-carburisation environment
Source abstract
Abstract
This paper reports the development of a physics-based life prediction model that incorporates three micro-damage processes. Both the particle area fraction and size, as determined using scanning electron microscopy, are used as the model input to predict the precipitate coarsening damage. Moreover, the carbon concentration profile, as measured using electron probe micro-analyser, are used to derive the carburisation damage distribution index. Compared to the Kowalewski-Dyson model, the present model can predict the stress dependent creep fracture strain and rupture time. The model, compiled into finite element via the user subroutine, can predict the heterogeneous damage accumulation of the cracking furnace tube made of HP40Nb alloy in a coupled creep-carburisation environment. The predicted total damage is comprised of precipitate coarsening and carburisation as the predominance, while the creep cavitation contributing much less due to the low internal pressure. The distribution of the precipitate coarsening is relatively homogeneous through the thickness, whereas the carburisation causes a steep increased damage value close to the inner surface. With regard to time, the precipitate coarsening damage is predominant in the initial stage, while the total damage is governed by the carburisation process with further exposure. Eventually, the total damage reaches the critical value at 59600 h, with the thickness of carburised layer exceeding 50% of the tube thickness, and the tube fails in the inner surface which agrees with the operational experience. The parametric sensitivity study reveals the importance of determining the Cr-rich carbide area fraction for the life prediction.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Temperature Alloys and Creep · Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. Effects of working temperature and carbon diffusion on the microstructure of high pressure heat-resistant stainless steel tubes used in pyrolysis furnaces during service condition10.1016/j.matdes.2011.07.069 ↗
2. Experimental observation and crystallographic description of M7C3 carbide transformation in Fe-Cr-Ni-C HP type alloy10.1016/j.actamat.2015.08.056 ↗
3. Fragmented structure of niobium carbide particles in as-cast modified HP alloys10.1016/j.actamat.2017.01.043 ↗
4. Microstructure evolution during service exposure of two cast, heat-resisting stainless steels — HP-Nb modified and 20-32Nb10.1016/j.matchar.2007.08.029 ↗
5. Niobium additions in HP heat-resistant cast stainless steels10.1016/1044-5803(92)90045-J ↗
6. Stress induced creep cavity10.1016/j.msea.2013.12.097 ↗
7. 3D analysis of creep voids in hydrogen reformer tubes10.1016/j.msea.2005.08.223 ↗
8. A three-dimensional characterization of creep void formation in hydrogen reformer tubes10.1016/j.scriptamat.2006.02.045 ↗
9. Microstructural characterization of modified 25Cr–35Ni centrifugally cast steel furnace tubes10.1016/S1044-5803(03)00013-5 ↗
10. Crystal plasticity analysis of the effect of dispersed β-phase on deformation and fracture of lamellar γ+α2 titanium aluminide10.1016/S0921-5093(98)00858-2 ↗
11. Investigations on carburizing mechanisms of Cr35Ni45Nb subjected to different service conditions in a high-temperature vacuum environment10.1557/jmr.2015.46 ↗
12. Study on microstructure and properties of centrifugal casting 35Cr45NiNb+MA furnace tubes during service10.1080/09603409.2019.1640511 ↗
13. Carburization of ethylene pyrolysis furnace tube in a petrochemical plant10.1115/1.4029974 ↗
14. Rupture time under creep conditions
15. Rabotnov · 1969
16. Damage localization of conventional creep damage models and proposition of a new model for creep damage analysis10.1299/jsmea.41.57 ↗
17. Comparative analysis of the sin-hyperbolic and Kachanov–Rabotnov creep-damage models10.1016/j.ijpvp.2019.02.001 ↗
18. A continuum damage mechanics (CDM) based Wilshire model for creep deformation, damage, and rupture prediction10.1016/j.msea.2020.140231 ↗
19. Creep damage mechanics and micromechanisms
20. Mechanisms-based creep constitutive equations for an aluminium alloy10.1243/03093247V294309 ↗
21. Use of CDM in materials modeling and component creep life prediction10.1115/1.556185 ↗
22. Stress regime-dependent creep constitutive model considerations in finite element continuum damage mechanics10.1177/1056789513479810 ↗
23. Damage prediction of HP40Nb steel with coupled creep and carburization based on the continuum damage mechanics
24. A diffusion driven carburisation combined with a multiaxial continuum creep model to predict random multiple cracking in engineering alloys10.1016/j.engfracmech.2015.07.057 ↗
25. Origins of tertiary creep in microalloyed 25Cr–35Ni centrifugally cast alloy tubes10.1179/1878641314Y.0000000013 ↗
26. Modelling of cavity nucleation under creep-fatigue interaction10.1016/j.mechmat.2021.103799 ↗
27. Creep and fracture of metals: mechanisms and mechanics10.1051/rphysap:01988002304060500 ↗
28. Review Progress in Ostwald ripening theories and their applications to nickel-base superalloys Part I: Ostwald ripening theories10.1023/A:1015388912729 ↗
29. Creep constitutive equations for a 0.5Cr-0.5Mo-0.25V ferritic steel in the temperature range 600-675°C10.1243/03093247V314299 ↗
30. Strain-induced coarsening of nanoscale precipitates in strength enhanced high Cr ferritic steels10.1016/j.msea.2011.10.105 ↗
31. A physically-based creep damage model for effects of different precipitate types10.1016/j.msea.2016.11.044 ↗
32. The dependence of Ostwald ripening kinetics on particle volume fraction10.1016/0001-6160(79)90041-5 ↗
33. The kinetics of precipitation from supersaturated solid solutions10.1016/0022-3697(61)90054-3 ↗
34. Creep deformation characteristics of microalloyed HP40Nb steel at 950 °C10.1007/s12206-019-0922-9 ↗
35. A comparative study of constitutive equations for the creep deformation of HP40Nb micro-alloyed steel10.1016/j.msea.2015.09.087 ↗
36. Creep behaviours of Cr25Ni35Nb and Cr35Ni45Nb alloys predicted by modified theta method10.1016/j.msea.2015.09.036 ↗
37. Skeletal point stresses in circumferentially notched tension bars undergoing tertiary creep modelled with physically based constitutive equations
38. The relation between minimum creep rate and time to fracture10.1080/03063453.1976.11683560 ↗
39. Creep rupture under multi-axial states of stress10.1016/0022-5096(72)90015-4 ↗
40. Estimates of the creep rupture lifetime of structures using the finite element method10.1016/0022-5096(75)90032-0 ↗
41. Modelling multiple crack initiation and evolution under environmental creep conditions using a continuum damage and probabalisitc approach
42. Environmental creep intergranular damage and multisite crack evolution model for engineering alloys10.1016/j.commatsci.2013.12.020 ↗
43. Microstructural study of the NbC to G-phase transformation in HP-Nb alloys10.1016/j.mtla.2020.100593 ↗
44. Effect of microstructural evolution in thermal exposure on mechanical properties of HP40Nb alloy10.1016/j.ijpvp.2021.104391 ↗
45. Carburization kinetics of heat-resistant steels10.1007/BF00656570 ↗
46. Coarsening of grain boundary carbides in a nickel-based ternary alloy during creep10.1016/S1359-6454(00)00107-5 ↗
47. Microstructural stability and mechanical properties of a new nickel-based superalloy10.1016/S0921-5093(03)00051-0 ↗