journal article·2022-01

Effect of Al content on the mechanical properties and toughening mechanism of Zr-Co-Al alloys prepared by rapid solidification

X. Li, W.F. Lu, C.J. Li, Q. Yuan, Z.X. Wu, J. Tan, P. Gao, X. You, J.H. Yi

Publisher page

Abstract

Abstract Zr50-x/2Co50-x/2Alx (x = 0, 4, 7) alloys fabricated by water-cooled copper mold casting yields excellent mechanical properties like high strength and large plasticity. Al can reduce the stacking fault energy and simultaneously improve strength and yield strength of the alloys. With increasing Al content, the effect of grain refinement strengthening, solid solution strengthening and second phase precipitation strengthening are enhanced to a certain extent. The good plasticity of these alloys primarily originates from the dislocation entanglement at the end of dislocation pileup and the transformation-induced plasticity associated with B2-to-B33 deformation-induced martensitic transformation. Zr46.5Co46.5Al7 alloy shows the highest ultimate compressive strength of 1787 MPa, and the largest ultimate failure strain of more than 25%.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced materials and composites · Nuclear Materials and Properties · Titanium Alloys Microstructure and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (38)

Show source-provided references
1. Formation and evolution of Cu-Sn intermetallic compounds in ultrasonic-assisted soldering10.1007/s11664-019-07405-1 ↗
2. Deformation structure in ductile B2-type Zr–Co–Ni alloys with martensitic transformation10.1007/s10853-010-5236-3 ↗
3. Enhancement of ductility in B2-type Zr–Co–Ni alloys with deformation-induced martensite and microcrack formation10.1016/j.intermet.2013.01.008 ↗
4. A novel strategy to design Zr–Co–Al BMG composites containing only B2–ZrCo phase10.1016/j.intermet.2020.106821 ↗
5. History-independent cyclic response of nanotwinned metals
6. Superplasticity extensibility and deformation mechanism of a nanocrystalline copper sample10.1002/1527-2648(200109)3:9<663::AID-ADEM663>3.0.CO;2-C ↗
7. Microstructure and mechanical properties of Zr–Co–Al alloys prepared by rapid solidification10.1557/jmr.2017.118 ↗
8. Rapid and partial crystallization to design ductile CuZr-based bulk metallic glass composites10.1016/j.matdes.2017.11.008 ↗
9. Nanoindentation creep behavior of Cu–Zr metallic glass films10.1080/21663831.2017.1383946 ↗
10. Formation of Cu–Zr–Al bulk metallic glass composites with improved tensile properties10.1016/j.actamat.2011.01.029 ↗
11. Control of microstructural characteristics and martensitic transformation behavior of Ti–Ni–Cu alloys by Pt doping10.1016/j.jallcom.2019.06.217 ↗
12. The crystallization process, microstructure, martensitic transformation and mechanical properties of Ti-Ni-Zr alloy ribbons10.1016/j.jallcom.2018.11.179 ↗
13. Effect of Fe on crystallization process of Zr-Co-Al-(Fe) bulk metallic glasses10.4028/www.scientific.net/MSF.745-746.734 ↗
14. Zr-Co-Al bulk metallic glass composites containing B2 ZrCo via rapid quenching and annealing10.1016/j.jallcom.2019.153079 ↗
15. On the transformation-induced work-hardening behavior of Zr47.5Co47.5Al5 ultrafine-grained alloy10.1016/j.intermet.2012.12.009 ↗
16. Preparation, characterization, and properties of novel Ti-Zr-Be-Co bulk metallic glasses10.3390/ma13010223 ↗
17. Chen. Accelerating exploitation of Co-Al-based superalloys from theoretical study10.1016/j.matdes.2018.01.013 ↗
18. Enhancement of ductility in B2-type Zr–Co–Pd alloys with martensitic transformation10.1016/j.intermet.2011.02.006 ↗
19. Formation of the B2–ZrCo phase and micro-hardness evolution in Zr–Co–Al BMGs via conventional and flash annealing10.1016/j.jallcom.2020.154230 ↗
20. Plasticity-improved Zr–Cu–Al bulk metallic glass matrix composites containing martensite phase
21. Effect of lateral pre-compression on the compressive behavior of a CuZr-based bulk metallic glass composite containing B2-CuZr phase10.1016/j.msea.2013.09.009 ↗
22. Binary Cu–Zr bulk metallic glasses10.1088/0256-307X/21/5/039 ↗
23. Excellent glass-forming ability in simple Cu50Zr50-based alloys10.1016/j.jnoncrysol.2005.03.012 ↗
24. Study of mechanical property and crystallization of a ZrCoAl bulk metallic glass10.1016/j.intermet.2010.12.006 ↗
25. Formation of Zr–Co–Al bulk metallic glasses with high strength and large plasticity10.1016/j.intermet.2012.08.003 ↗
26. Effect of Fe addition on glass forming ability and mechanical properties in Zr–Co–Al–(Fe) bulk metallic glasses10.1016/j.msea.2012.01.068 ↗
27. Correlation between internal states and strength in bulk metallic glass10.1063/1.3580774 ↗
28. Formation of crystalline phase in the glass matrix of Zr-Co-Al glass-matrix composites and its effect on their mechanical properties10.1007/s12540-017-6851-1 ↗
29. Formation, corrosion behavior, and mechanical properties of bulk glassy Zr-Al-Co-Nb alloys10.1557/JMR.2003.0227 ↗
30. Formation and bioactivation of Zr-Al-Co bulk metallic glasses10.1557/jmr.2009.0348 ↗
31. Refined lamellar eutectic in biomedical Zn–Al–Zr alloys for mechanical reinforcement10.1002/adem.201801322 ↗
32. Enhanced strength and transformation-induced plasticity in rapidly solidified Zr–Co–(Al) alloys10.1016/j.scriptamat.2013.02.029 ↗
33. Formation of two-glassy-phase bulk metallic glass in Zr-Co-Al-Y immiscible system10.1016/j.jallcom.2018.12.005 ↗
34. Composition optimization of the Al–Co–Zr bulk metallic glasses10.1016/j.scriptamat.2003.12.014 ↗
35. Martensitic transformation induced plasticity in ZrCuAl metallic glass composites: precipitate size and volume effects10.1016/j.intermet.2015.09.002 ↗
36. Microstructural heterogeneities governing the deformation of Cu47.5Zr47.5Al5 bulk metallic glass composites10.1016/j.actamat.2009.07.042 ↗
37. Ductility enhancement in B2-type Zr-Co-Ni alloys with martensitic transformation10.2320/matertrans.M2009182 ↗
38. Zr-Al-Co-Cu bulk metallic glasses for biomedical devices applications10.1016/j.jallcom.2017.09.144 ↗