Small-scale plasticity of ultra-fine grained alloy and nanostructured nanocomposite: Ambient and elevated-temperature nanoindentation
Source abstract
Abstract
Abstract This article presents the experimental and modeling results of nanoindentation testing at ambient and elevated temperatures (i.e. 300 to 523 K), examining the small-scale plasticity of ultra-fine grained (UFG) alloy and nanostructured nanocomposite (NS) materials. The complex small-scale deformation mechanisms are highlighted to assess the material flow behavior under the indenter, which involves the interaction of dislocations and nanoparticles restricting the slip/glide of dislocations. Combined with UFG band propagation and transition stages, these lead to a stabilized mechanical strength at elevated temperatures. Accordingly, the activation energy for softening during localized deformation behavior of the nanocomposite is increased compared to the UFG alloy. It is attributed to a shift in the dislocations activation volume and energy aided by altered grain boundary diffusion and sliding mechanisms. It is shown that the straining role of nanoparticles leads to substantial grain size refinement to the nano-scale with enhanced generation of geometrically necessary dislocations. However, these nanoparticles' presence on the boundaries of nano-sized sub-grains can reduce the migration energy and restrict the sliding-based deformation mechanism.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · Advanced materials and composites · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (82)
Show source-provided references
1. Indentation hardness measurements at macro-, micro-, and nanoscale: a critical overview10.1007/s11249-016-0805-5 ↗
2. A modified method for hardness determination from nanoindentation experiments with imperfect indenters10.1155/2016/9213841 ↗
3. Assessment of the depth dependence of the indentation stress during constant strain rate nanoindentation of 70/30 brass10.1016/j.msea.2013.02.009 ↗
4. Nanoindentation studies of materials10.1016/S1369-7021(06)71495-X ↗
5. The transition from localized to homogeneous plasticity during nanoindentation of an amorphous metal10.1080/1478643031000118012 ↗
6. A nanoindentation study of serrated flow in bulk metallic glasses10.1016/S1359-6454(02)00303-8 ↗
7. Indentation-based assessment of the dependence of geometrically necessary dislocations upon depth and strain rate in FCC materials10.1016/j.msea.2013.08.018 ↗
8. On room-temperature nanoindentation response of an Al–Li–Cu alloy10.1016/j.msea.2016.08.091 ↗
9. Indentation-based rate-dependent plastic deformation of polycrystalline pure magnesium10.1016/j.msea.2018.01.036 ↗
10. Nanoindentation creep properties of lead-free nanocomposite solders reinforced by modified carbon nanotubes10.1016/j.msea.2020.140203 ↗
11. Twinning anisotropy of tantalum during nanoindentation10.1016/j.msea.2014.12.075 ↗
12. Grain and grain boundary activities observed in alumina–zirconia–magnesia spinel nanocomposites by in situ nanoindentation using transmission electron microscopy10.1016/j.actamat.2010.05.027 ↗
13. Softening and dilatation in a single shear band10.1016/j.actamat.2011.04.047 ↗
14. Application of nucleation theory to the rate dependence of incipient plasticity during nanoindentation10.1557/JMR.2004.0276 ↗
15. Size-induced enhanced mechanical properties of nanocomposite copper/niobium wires: nanoindentation study10.1016/S1359-6454(02)00351-8 ↗
16. Anneal hardening and elevated temperature strain rate sensitivity of nanostructured metals: their relation to intergranular dislocation accommodation10.1016/j.actamat.2018.12.002 ↗
17. New regime of homogeneous flow in the deformation map of metallic glasses: elevated temperature nanoindentation experiments and mechanistic modeling10.1016/j.actamat.2004.09.005 ↗
18. An indentation-based method to determine constituent strengths within nanolayered composites10.1016/j.actamat.2015.04.002 ↗
19. Plastic deformation in nanoindentation of tantalum: a new mechanism for prismatic loop formation10.1016/j.actamat.2014.06.058 ↗
20. Indentation behavior of metal–ceramic multilayers at the nanoscale: numerical analysis and experimental verification10.1016/j.actamat.2009.11.046 ↗
21. Quantitative insight into dislocation nucleation from high-temperature nanoindentation experiments10.1038/nmat1429 ↗
22. On the diffusive phase transformation mechanism assisted by extended dislocations during creep of a single crystal CoNi-based superalloy10.1016/j.actamat.2018.05.074 ↗
23. Nanostructure and surface effects on yield in Cu nanowires10.1016/j.actamat.2012.11.053 ↗
24. Structural evolution and the Hall-Petch relationship in an Al-Mg-Li-Zr alloy with ultra-fine grain size10.1016/S1359-6454(97)00120-1 ↗
25. Optimization of strength and ductility in nanotwinned ultra-fine grained Ag: twin density and grain orientations10.1016/j.actamat.2015.06.030 ↗
26. Ultrafine-grain metals by severe plastic deformation10.1016/j.matchar.2014.02.003 ↗
27. Bulk nanostructured materials from severe plastic deformation10.1016/S0079-6425(99)00007-9 ↗
28. Cryogenic friction-stir processing of ultrafine-grained Al–Mg–TiO2 nanocomposites10.1016/j.msea.2014.10.048 ↗
29. What is behind the inverse Hall-Petch effect in nanocrystalline materials?10.1016/j.actamat.2007.02.021 ↗
30. Quantitative prediction of texture effect on Hall–Petch slope for magnesium alloys10.1016/j.actamat.2019.05.016 ↗
31. Principles of equal-channel angular pressing as a processing tool for grain refinement10.1016/j.pmatsci.2006.02.003 ↗
32. A review on high-pressure torsion (HPT) from 1935 to 198810.1016/j.msea.2015.11.074 ↗
33. Using high-pressure torsion for metal processing: fundamentals and applications10.1016/j.pmatsci.2008.03.002 ↗
34. Accumulative roll bonding-A review10.3390/app9173627 ↗
35. Microstructure–mechanical property relationship in an Al–Mg alloy processed by constrained groove pressing-cross route10.1080/02670836.2017.1416906 ↗
36. Dynamic strain aging behavior of an ultra-fine grained Al-Mg alloy (AA5052) processed via classical constrained groove pressing10.1016/j.jmrt.2018.04.016 ↗
37. Potentials and strategies of solid-state additive friction-stir manufacturing technology: a critical review10.1016/j.jmapro.2018.09.030 ↗
38. Friction stir welding/processing of metals and alloys: a comprehensive review on microstructural evolution
39. Application of CGP-cross route process for microstructure refinement and mechanical properties improvement in steel sheets10.1016/j.jmapro.2013.08.001 ↗
40. 3D finite element analysis and experimental validation of constrained groove pressing–cross route as an SPD process for sheet form metals10.1007/s00170-014-5919-z ↗
41. Accumulative fold-forging (AFF) as a novel severe plastic deformation process to fabricate a high strength ultra-fine grained layered aluminum alloy structure10.1016/j.matchar.2017.12.023 ↗
42. Nano-indentation behavior of layered ultra-fine grained AA8006 aluminum alloy and AA8006-B4C nanostructured nanocomposite produced by accumulative fold forging process10.1016/j.msea.2018.12.013 ↗
43. Fabrication and characterization of a high strength ultra-fine grained metal-matrix AA8006-B4C layered nanocomposite by a novel accumulative fold-forging (AFF) process10.1016/j.matdes.2018.07.047 ↗
44. Characterization of accumulative fold-forged magnesium-nickel multilayered composite structures10.1016/j.matchar.2020.110478 ↗
45. Impact of homogenization on microchemistry and recrystallization of the Al-Fe-Mn alloy AA 800610.1016/j.matchar.2013.02.012 ↗
46. Boron carbide: structure, properties, and stability under stress10.1111/j.1551-2916.2011.04865.x ↗
47. The effect of constrained groove pressing on grain size, dislocation density and electrical resistivity of low carbon steel10.1016/j.matdes.2011.02.032 ↗
48. Constrained groove pressing of low carbon steel: nano-structure and mechanical properties10.1016/j.msea.2010.03.005 ↗
49. J. Thornby, A. Harris, A. Bird, B. Beake, V.B. Manakari, M. Gupta, M. Haghshenas, Micromechanics and indentation creep of magnesium carbon nanotube nanocomposites: 298 K–573 K, Mater. Sci. Eng. A 801 140418.10.1016/j.msea.2020.140418 ↗
50. On the generality of the relationship among contact stiffness, contact area, and elastic modulus during indentation10.1557/JMR.1992.0613 ↗
51. Microscopic study regarding the microstructure evolution of the 8006 alloy in the plastic deformation process10.1016/j.jmatprotec.2004.04.345 ↗
52. On the correlation between indentation hardness and tensile strength in friction stir processed materials10.1016/j.msea.2020.139682 ↗
53. Hardness-strength relationships in fine and ultra-fine grained metals processed through constrained groove pressing10.1016/j.msea.2015.03.122 ↗
54. On the contact area for nanoindentation tests with Berkovich indenter: case study on soda-lime glass10.1016/j.matlet.2003.09.026 ↗
55. Correction factor for contact area in nanoindentation measurements10.1557/JMR.2005.0099 ↗
56. The influence of indenter tip rounding on the indentation size effect10.1016/j.actamat.2010.03.004 ↗
57. Effect of heat treatments on microstructure/small-scale properties of additive manufactured Ti-6Al-4V10.1007/s00170-019-03789-w ↗
58. Indentation-based characterization of creep and hardness behavior of magnesium carbon nanotube nanocomposites at room temperature10.1007/s42452-019-0696-9 ↗
59. Size dependence of mechanical properties of gold at the micron scale in the absence of strain gradients10.1016/j.actamat.2004.12.031 ↗
60. Indentation size effects in crystalline materials: a law for strain gradient plasticity10.1016/S0022-5096(97)00086-0 ↗
61. Size effects in nanoindentation: an experimental and analytical study10.1007/s00707-009-0222-z ↗
62. Variable (intrinsic) material length scale for face-centred cubic metals using nano-indentation
63. Indentation size effect in metallic materials: correcting for the size of the plastic zone10.1016/j.scriptamat.2005.02.009 ↗
64. Activation parameters for deformation of ultrafine-grained aluminium as determined by indentation strain rate jumps at elevated temperature10.1016/j.msea.2013.07.033 ↗
65. Review of nanoindentation size effect: experiments and atomistic simulation10.3390/cryst7100321 ↗
66. The annealing phenomena and thermal stability of severely deformed steel sheet10.1016/j.msea.2011.03.024 ↗
67. Differential scanning calorimetry study of constrained groove pressed low carbon steel: recovery, recrystallisation and ferrite to austenite phase transformation10.1179/1743284713Y.0000000388 ↗
68. Frost · 1982
69. Depth-sensing cyclic nanoindentation of tantalum10.1016/j.ijrmhm.2017.03.015 ↗
70. Dislocation dynamics during plastic deformation
71. Lengthscale-dependent, elastically anisotropic, physically-based hcp crystal plasticity: application to cold-dwell fatigue in Ti alloys10.1016/j.ijplas.2006.10.013 ↗
72. Origin of the depth dependence of the apparent activation volume in polycrystalline 99.999% Cu determined by displacement rate change micro-indentation10.1016/j.msea.2004.02.079 ↗
73. Assessment of the depth dependence of the indentation stress during constant strain rate nanoindentation of 70/30 brass10.1016/j.msea.2013.02.009 ↗
74. Temperature dependence of activation volume on Cu content of ultra-low carbon steel10.1080/14786435.2017.1359423 ↗
75. Analysis of strengthening mechanisms in alloys by means of thermal-activation theory10.1016/0001-6160(79)90129-9 ↗
76. Using high-pressure torsion to process an aluminum-magnesium nanocomposite through diffusion bonding10.1557/jmr.2015.257 ↗
77. On the thermal stability of ultrafine-grained Al stabilized by in-situ amorphous Al2O3 network10.1016/j.msea.2015.09.037 ↗
78. Strengthening mechanisms and deformation behavior of cryomilled Al–Cu–Mg–Ag alloy10.1016/j.jallcom.2015.01.160 ↗
79. Metastable, mechanically alloyed and nanocrystalline materials
80. Koch · 2002 · 423
81. Strengthening mechanisms in AL alloys - an overview of natural limits and engineering possibilities10.4028/www.scientific.net/MSF.217-222.57 ↗
82. Messerschmidt · 2010 · 73