journal article·2021-01

The effect of transformed β-phase on local area plastic deformation and dislocation characteristics of Ti6242s alloy under low-cycle fatigue and dwell fatigue

MingDa Zhang, JingXia Cao, Ting Li, ZhanJiang Zhai, Nan Sui, Rongguang Jia, Xu Huang

Publisher page

Abstract

Abstract For the aims of this study, the local area plastic deformation and dislocation characteristics of the Ti–6Al–2Sn–4Zr–2Mo-0.1Si alloy under low-cycle fatigue and dwell fatigue at room temperature were closely analyzed. The main outcomes of intragranular-local-misorientation of the samples after different low-cycle fatigue and dwell fatigue cycles showed that inhomogeneous plastic deformation occurred in local areas in the equiaxed primary α-phase and the transformed β-phase. High plastic deformation areas preferably existed in transformed β-colonies and some equiaxed primary α-grains, whereas low plastic deformation areas tended to exist only in equiaxed primary α-grains. Different from the related descriptions in traditional crystal plastic finite element simulation, the definite relationship between the crystallographic orientation of low plastic deformation equiaxed primary α-grains and the fatigue loading direction was not found. Furthermore, transmission electron microscopy dislocation analysis showed that banded dislocations formed in some equiaxed primary α-grains under the effect of the nearby transformed β-phase. Such bands were related to the arrangement direction of α+β colonies in the transformed β-phase and the crystallographic orientation of the primary α-phase. This deformation coordination behavior between the equiaxed primary α-phase and the transformed β-phase analyzed and aforementioned in the titanium alloys with a relatively low volume fraction of the primary α-phase requires further examination.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Titanium Alloys Microstructure and Properties · Intermetallics and Advanced Alloy Properties · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. Dwell fatigue microstructure in a near-α titanium alloy10.1007/s11661-007-9105-x ↗
2. An investigation of the effects of microstructure on dwell fatigue crack growth in Ti-624210.1016/j.msea.2005.05.097 ↗
3. A comparative study on dwell fatigue of Ti-6Al-2Sn-4Zr-xMo (x=2 to 6) alloys on a microstructure-normalized basis10.1007/s11661-014-2541-5 ↗
4. An investigation on fatigue and dwell-fatigue crack growth in Ti–6Al–2Sn–4Zr–2Mo–0.1Si10.1016/S0167-6636(03)00035-8 ↗
5. W. Shen, A. B. O. Soboyejo, W. O. Soboyejo, Fatigue and dwell-fatigue crack growth in Ti-6Al-2Sn-4Zr-2Mo-0.1Si with elongated alpha/beta microstructure, TMS annual meeting. 227–245. https://www.researchgate.net/publication/288277620_Fatigue_and_dwellfatigue_crack_growth_in_Ti_-_6Al_-_2Sn_-_4Zr_-_2Mo_-_01Si_with_elongated_a_b_microstructure.
6. A. L. Pilchak, K. Nakase, I. Inagaki, Y. Shirai, A. H. Rosenberger, J. C. Williams, Influence on microstructure and microtexture on fatigue crack initiation and growth in alpha + beta titanium, Technical Paper 1–4. https://www.mendeley.com/catalogue/08deb7e2-733c-3a4d-ae3e-a57375eec2f9/.
7. Deformation and damage mechanisms in an α/β 6242 Ti alloy in fatigue, dwell-fatigue and creep at room temperature. Influence of internal hydrogen10.1016/j.msea.2008.11.045 ↗
8. Experimental investigation on dwell-fatigue property of Ti-6Al-4V ELI used in deep-sea manned cabin10.1016/j.msea.2015.06.089 ↗
9. Influence of complex LCF and dwell load regimes on fatigue of Ti-6Al-4V10.1016/j.actamat.2015.09.014 ↗
10. The effect of hold time on the fatigue properties of a β-processed titanium alloy10.1007/BF02811727 ↗
11. Crystal plasticity based Fe model for understanding microstructural effects on creep and dwell fatigue in Ti-624210.1115/1.2204942 ↗
12. A systematic study of hcp crystal orientation and morphology effects in polycrystal deformation and fatigue
13. Dwell fatigue crack nucleation model based on crystal plasticity finite element simulations of polycrystalline titanium alloys10.1016/j.jmps.2011.05.003 ↗
14. Lengthscale-dependent, elastically anisotropic, physically-based hcp crystal plasticity: application to cold-dwell fatigue in Ti alloys10.1016/j.ijplas.2006.10.013 ↗
15. Understanding thermal alleviation in cold dwell fatigue in titanium alloys10.1016/j.ijplas.2018.07.018 ↗
16. Dwell fatigue in two Ti alloys: an integrated crystal plasticity and discrete dislocation study10.1016/j.jmps.2016.08.008 ↗
17. Investigation of slip transfer across HCP grain boundaries with application to cold dwell facet fatigue10.1016/j.actamat.2017.01.021 ↗
18. Microstructure and load sensitive fatigue crack nucleation in Ti-6242 using accelerated crystal plasticity FEM simulations10.1016/j.ijfatigue.2012.10.022 ↗
19. Cuddihy · 2017 · 97 · 177
20. Local deformation patterns in Ti–6Al–4V under tensile, fatigue and dwell fatigue loading10.1016/j.ijfatigue.2012.03.001 ↗
21. Dwell and normal cyclic fatigue behaviours of Ti60 alloy10.1016/j.jmst.2013.10.010 ↗
22. Effects of α+β phase deformation on microstructure, fatigue and dwell fatigue behavior of a near alpha titanium alloy10.1016/j.ijfatigue.2016.05.023 ↗
23. A cold dwell fatigue crack nucleation criterion for polycrystalline Ti-6242 using grain-level crystal plasticity FE Model10.1016/j.ijfatigue.2008.05.026 ↗
24. Microstructural effects on strain rate and dwell sensitivity in dual-phase titanium alloys10.1016/j.actamat.2018.09.035 ↗
25. Experimentally validated dwell and cyclic fatigue crack nucleation model for α-titanium alloys10.1016/j.scriptamat.2016.08.031 ↗
26. Phase morphology, variants and crystallography of alloy microstructures in cold dwell fatigue10.1016/j.ijfatigue.2018.03.030 ↗
27. Ashton · 2017 · 100 · 377
28. Ferrite channel effect on ductility and strain hardenability of ultra high strength dual phase steel10.1016/j.msea.2017.01.007 ↗
29. Local softening behavior accompanied by dislocation multiplication accelerates the failure of Ti-6Al-2Sn-4Zr-2Mo-0.1Si alloy under dwell fatigue load10.1016/j.scriptamat.2020.03.054 ↗
30. Dislocation structure in rapidly solidified Mg97Zn1Y2 alloy with long period stacking order phase10.2320/matertrans.46.361 ↗