journal article·2021-01Open access

Microstructure evolution of alloy 709 during static-aging and creep-fatigue testing

T.D. Porter, Z. Wang, E.P. Gilbert, M.J. Kaufman, R.N. Wright, K.O. Findley

Abstract

Alloy 709 (20Cr–25Ni-1.5Mo–Nb steel), a candidate structural alloy for Gen IV nuclear reactors, is expected to undergo microstructural evolution during long-term service at elevated temperatures, which in turn affects the mechanical behavior through changing contributions from precipitate and solute strengthening. For safe reactor design, it is important to understand how microstructural evolution and mechanical behavior differ between long-term service and accelerated laboratory tests, such as low cycle fatigue (LCF) and creep-fatigue. In this study, a combined electron microscopy and small angle neutron scattering (SANS) analysis has been performed to quantify and compare the precipitation evolution in the alloy after a range of static aging treatments (at 550 to 750 °C for 1–2500 h) and laboratory LCF and creep-fatigue tests (at 550 and 650 °C). The experimental precipitation quantification results from the static-aged material are found to be deviated from the equilibrium thermodynamic predictions. In addition, dynamic precipitation that occurs during fatigue testing leads to finer and more uniform distribution of carbide precipitates with a higher volume fraction compared to static aging under similar time and temperature conditions. Thus, deformation during accelerated testing results in a significantly different microstructure compared to that expected during service conditions where the accumulation of deformation occurs over a much longer period.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Temperature Alloys and Creep · Nuclear Materials and Properties · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. Yamamoto · 2012
2. 2007
3. Stainless steels with improved strength for service at 760 C and above
4. Elevated-temperature performance of 20Cr-25Ni steel for tubes in ultra-supercritical power boilers
5. Microstructural evolution in two variants of NF709 at 1023 and 1073 K10.1007/s11661-005-0135-y ↗
6. Precipitation in creep resistant austenitic stainless steels10.1179/026708301101508972 ↗
7. Assessment of creep-fatigue behavior, deformation mechanisms, and microstructural evolution of alloy 709 under accelerated conditions10.1016/j.ijfatigue.2019.02.037 ↗
8. Atomic resolution characterization of strengthening nanoparticles in a new high-temperature-capable 43Fe-25Ni-22.5Cr austenitic stainless steel10.1016/j.msea.2018.02.004 ↗
9. Fatigue and creep-fatigue deformation of an ultra-fine precipitate strengthened advanced austenitic alloy10.1016/j.msea.2012.07.082 ↗
10. Absence of dynamic strain aging in an additively manufactured nickel-base superalloy10.1038/s41467-018-04473-5 ↗
11. Precipitation and hot deformation behavior of austenitic heat-resistant steels : a review10.1016/j.jmst.2017.01.025 ↗
12. Development of new austenitic stainless steel boiler tube with high strength at elevated temperatures and intergranular corrosion resistance
13. Numerical simulation of long-term precipitate evolution in austenitic heat-resistant steels
14. Nucleation and precipitation kinetics of M23C6 and M2N in an Fe-Mn-Cr-C-N austenitic matrix and their relationship with the sensitization phenomenon10.1016/j.actamat.2011.06.038 ↗
15. Precipitation kinetics in a 10.5%Cr heat resistant steel: experimental results and simulation by TC-PRISMA/DICTRA10.1016/j.matchemphys.2017.07.083 ↗
16. Study of nucleation, growth and coarsening of precipitates in a novel 9%Cr heat resistant steel: experimental and modeling10.1016/j.matchemphys.2013.10.010 ↗
17. Precipitate characterisation in metallic systems by small-angle X-ray or neutron scattering10.1016/j.crhy.2011.12.008 ↗
18. On the validity of simple precipitate size measurements by small-angle scattering in metallic systems10.1107/S0021889811003049 ↗
19. Small-angle scattering in materials science - a short review of applications in alloys, ceramics and composite materials10.1107/S0021889803000335 ↗
20. Jack · 1972 · 790
21. Precipitation of Z-phase in a high-nitrogen stainless steel10.1007/BF02835491 ↗
22. QUOKKA, the pinhole small-angle neutron scattering instrument at the OPAL Research Reactor, Australia: design, performance, operation and scientific highlights10.1107/S1600576718002534 ↗
23. BILBY: time-of-flight small angle scattering instrument10.1080/10448632.2016.1163980 ↗
24. Irena: tool suite for modeling and analysis of small-angle scattering10.1107/S0021889809002222 ↗
25. Constriction energy in the presence of a solute field10.1063/1.372161 ↗
26. Role of dynamic strain ageing in low cycle fatigue10.1007/BF02757656 ↗
27. Serrated yielding in an advanced stainless steel Fe-25Ni-20Cr (wt%)10.1016/j.msea.2019.02.023 ↗
28. Threshold stresses for dislocation climb over hard particles: the effect of an attractive interaction10.1016/0001-6160(86)90247-6 ↗
29. Glide and climb resistance to the motion of an edge dislocation due to dragging a Cottrell atmosphere10.1080/01418617908234833 ↗
30. Overview: high-nitrogen alloying of stainless steels10.1016/0921-5093(95)09991-3 ↗
31. Nitrogen strengthening of a stable Austenitic stainless steel10.1016/0001-6160(87)90131-3 ↗
32. The influence of nitrogen on high temperature low cycle fatigue behaviour of austenitic stainless steels10.1111/j.1460-2695.1984.tb00359.x ↗
33. Effect of nitrogen on high temperature low cycle fatigue behaviors in type 316L stainless steel10.1016/S0022-3115(97)00360-7 ↗
34. Mechanisms of slip mode modification in F.C.C solid solutions10.1016/0956-7151(90)90126-2 ↗
35. Strain aging and strain hardening in Ni-C alloys10.1016/0001-6160(85)90026-4 ↗