Shear banding and fracture behaviors of a bulk metallic glass studied via in-situ bending experiments with notched and un-notched specimens
Source abstract
Abstract
Abstract The shear banding and fracture behaviors of Ti32.8Zr30.2Ni5.3Cu9Be22.7 bulk metallic glass (BMG) were studied via in-situ three-point bending experiments using notched and un-notched specimens. A notch strengthening effect was found based on comparing the nominal flexural strength of the notched and un-notched specimens. From in-situ observations of the notched specimens, it was found that the first shear band initiated near the notch tip was followed by a spate of shear band initiations in a wider range of locations, leading to macroscopic yielding. The shear band zone continued to grow until the specimen fractured, with plastic strain being accommodated by repeated branching of shear bands and increase of shear offset in the earlier formed parts of shear bands. Significant differences in the 3-dimensional orientation and shear offset direction of shear bands were observed between the notched and un-notched specimens. These differences were analyzed by relating the elastic stress fields in the general direction of shear band growth, obtained by finite element modeling, to the ellipse criterion.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallic Glasses and Amorphous Alloys · Cultural Heritage Materials Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. Zheng · 2008
2. Notch strengthening or weakening governed by transition of shear failure to normal mode fracture10.1038/srep10537 ↗
3. Rösler · 2007
4. Hertzberg · 1995
5. Difference in compressive and tensile fracture mechanisms of Zr59Cu20Al10Ni8Ti3 bulk metallic glass10.1016/S1359-6454(02)00521-9 ↗
6. Tensile fracture morphologies of bulk metallic glass10.1063/1.3487968 ↗
7. Notch effect of materials: strengthening or weakening?10.1016/j.jmst.2014.04.014 ↗
8. Metallic glasses: notch-insensitive materials10.1016/j.scriptamat.2012.01.044 ↗
9. Plastic constraint and ductility in tensile notched specimens of amorphous Pd78CU6Si1610.1007/BF02643787 ↗
10. Origin of anomalous inverse notch effect in bulk metallic glasses10.1016/j.jmps.2015.07.006 ↗
11. Necking and notch strengthening in metallic glass with symmetric sharp-and-deep notches10.1038/srep10797 ↗
12. Mean stress effects on flow localization and failure in a bulk metallic glass10.1016/S1359-6454(01)00125-2 ↗
13. Densification and strain hardening of a metallic glass under tension at room temperature10.1103/PhysRevLett.111.135504 ↗
14. The shear band controlled deformation in metallic glass: a perspective from fracture10.1038/srep21852 ↗
15. Deformation evolution of a Zr-based bulk metallic glass under three-point bending tests10.4028/www.scientific.net/AMR.939.31 ↗
16. In situ observation of bending stress–deflection response of metallic glass10.1016/j.msea.2013.05.091 ↗
17. Deformation and fracture of an amorphous Pd-Cu-Si alloy in V-notch bending tests—I: model mechanics of inhomogeneous plastic flow in non-strain hardening solid10.1016/0001-6160(80)90020-6 ↗
18. Tensile fracture criterion of metallic glass10.1063/1.3580285 ↗
19. Unified tensile fracture criterion10.1103/PhysRevLett.94.094301 ↗
20. Yield surface of a simulated metallic glass10.1016/S1359-6454(03)00396-3 ↗
21. TiZr-base bulk metallic glass with over 50 mm in diameter10.1016/S1005-0302(10)60077-1 ↗
22. Locating malleable bulk metallic glasses in Zr–Ti–Cu–Al alloys with calorimetric glass transition temperature as an Indicator10.1016/S1005-0302(12)60180-7 ↗
23. Effect of cooling rate on the bending plasticity of Zr55Al10Ni5Cu30 bulk metallic glass10.1016/j.jallcom.2012.02.126 ↗
24. Bendable bulk metallic glass: effects of a thin, adhesive, strong,and ductile coating10.1016/j.actamat.2012.02.037 ↗
25. Shear transformation zone volume determining ductile–brittle transition of bulk metallic glasses10.1016/j.actamat.2010.12.006 ↗
26. Silva · 2006
27. Initiation of shear bands near a stress concentration in metallic glass10.1016/j.actamat.2007.05.054 ↗
28. Pilkey · 1997
29. Progressive shear band propagation in metallic glasses under compression10.1016/j.actamat.2015.03.026 ↗