journal article·2019-09

Effect of unconstraint vibration treatment on fatigue damage healing for copper film

Hai-Meng Zhang, De-Guang Shang, Xiao-Dong Liu, Ya-Nan Liu, Yu Zhang

Publisher page

Abstract

Abstract A novel approach to heal fatigue damage for copper film by unconstraint vibration was proposed in this paper. The microscope observation for copper film under various conditions was conducted on exactly the same area by electron backscatter diffraction (EBSD) method. The results found that the fraction of the low angle grain boundaries (LAGBs), the dislocation density, the stored strain energy, and the grain orientation can be restored to the original state after the unconstraint vibration treatment. The plastic strain energy generated in the damage process for the copper film before and after the treatment was analyzed. It was found that the increased plastic strain energy of the specimen after treatment is approximately equal to the consumed plastic strain energy of the specimen before treatment. The fatigue-healing experimental results showed that the fatigue crack initiation life is about 2.6 times that of no treatment.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electromagnetic Effects on Materials · Non-Destructive Testing Techniques · Mechanical stress and fatigue analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. Atomistic mechanisms of fatigue in nanotwinned metals10.1016/j.actamat.2015.07.045 ↗
2. A comparison of EBSD based strain indicators for the study of Fe-3Si steel subjected to cyclic loading10.1016/j.matchar.2016.03.020 ↗
3. Influence of bulk damage on crack initiation in low-cycle fatigue of 316 stainless steel10.1111/j.1460-2695.2009.01420.x ↗
4. The physics of fatigue crack initiation10.1016/j.ijfatigue.2012.10.009 ↗
5. The influence of surface enhancement by low plasticity burnishing on the corrosion fatigue performance of AA7075-T610.1016/j.ijfatigue.2004.01.010 ↗
6. Life assessment and repair of fatigue damaged high strength aluminium alloy structure using a peening rework method10.1016/j.engfailanal.2006.11.047 ↗
7. Healing fatigue damage by laser shock peening for copper film10.1016/j.ijfatigue.2013.03.013 ↗
8. Approach to recovery of fatigue damage for copper film by pulsed laser irradiation10.1179/1743294413Y.0000000149 ↗
9. Fatigue life recovery in aluminium alloy aircraft structure10.1046/j.1460-2695.2002.00481.x ↗
10. Analysis of fatigue resistance improvements via surface severe plastic deformation10.1016/j.ijfatigue.2007.10.010 ↗
11. Restoration of fatigue damage in stainless steel by high-density electric current10.1016/j.ijfatigue.2013.08.012 ↗
12. Damage healing of aluminum alloys by D.C electropulsing and evaluation by resistance10.1016/S1875-5372(10)60027-6 ↗
13. Effect of magnetic treatment on fatigue life of AISI 4140 steel10.1016/j.matdes.2004.09.003 ↗
14. Exploration on repairing fatigue damage of steel specimens with magnetic treatment10.1016/S1359-6462(99)00010-X ↗
15. Residual stress distributions and their influence on fatigue lifetimes10.1016/S0142-1123(01)00133-5 ↗
16. Texture evolution and residual stress relaxation in a cold-rolled Al-Mg-Si-Cu alloy using vibratory stress relief technique10.1007/s11661-012-1450-8 ↗
17. The relationships between residual stress relaxation and texture development in AZ31 Mg alloys via the vibratory stress relief technique10.1016/j.matchar.2014.09.019 ↗
18. The effectiveness evaluation of 314L stainless steel vibratory stress relief by dynamic stress10.1016/j.ijfatigue.2006.02.047 ↗
19. The effect of thermal treatment on the stress state and evolving microstructure of Cu/W nano-multilayers10.1063/1.4967992 ↗
20. Influence of stress relieving by vibration on the fatigue behavior of welded joints in comparison to post-weld heat treatment10.1111/j.1460-2695.1996.tb01315.x ↗
21. Vibratory stress relief: a fundamental study of its effectiveness
22. The effect of residual stress relaxation by the vibratory stress relief technique on the textures of grains in AA 6061 aluminium alloy10.1016/j.msea.2014.03.037 ↗
23. The influence of vibratory treatment on the fatigue life of welds: a comparison with thermal stress relief10.1111/j.1475-1305.2001.tb01250.x ↗
24. Reduce the residual stress of welded structures by post-weld vibration10.4028/www.scientific.net/MSF.490-491.102 ↗
25. Effect of vibratory stress relief on fatigue life of aluminium alloy 7075-T65110.1177/1687814016654379 ↗
26. Experimental investigation on the fatigue life of Ti-6Al-4V treated by vibratory stress relief10.3390/met7050158 ↗
27. Fatigue life of 7075-T651 aluminium alloy treated with vibratory stress relief10.1016/j.ijfatigue.2017.11.011 ↗
28. Vibration stress relief treatment of welded high-strength martensitic steel10.1007/BF03263519 ↗
29. Characterisation of strain localisation processes during fatigue crack initiation and early crack propagation by SEM-DIC in an advanced disc alloy10.1016/j.msea.2017.05.091 ↗
30. Misorientation mapping for visualization of plastic deformation via electron back-scattered diffraction10.1017/S1431927606060120 ↗
31. Initiation and growth of short fatigue cracks in austenitic Sanicro 25 steel10.1111/ffe.12794 ↗
32. Influence of Fe addition on annealing behaviors of a phosphorus containing brass10.1016/j.jallcom.2017.04.087 ↗
33. Stored energy and Taylor factor relation in an Al-Mg-Mn alloy sheet worked by continuous cyclic bending10.2320/matertrans.45.2316 ↗
34. A review of strain analysis using electron backscatter diffraction10.1017/S1431927611000055 ↗
35. On the stored energy evolution after accumulative roll-bonding of invar alloy10.1016/j.matchemphys.2017.08.063 ↗
36. Quantification of plastic strain of stainless steel and nickel alloy by electron backscatter diffraction10.1016/j.actamat.2005.08.046 ↗
37. Plastic strain energy in fatigue failure10.1115/1.3264362 ↗
38. Strain energy based low cycle fatigue damage analysis in a plain C-Mn rail steel10.1016/j.msea.2017.09.035 ↗
39. Damage prediction for un-coated and coated aluminum alloys under thermal and mechanical fatigue loadings based on a modified plastic strain energy approach10.1016/j.matdes.2014.04.022 ↗