journal article·2018-01Open access

Precipitate strengthening and thermal stability in three component metallic nanolaminate thin films

R.L. Schoeppner, A.A. Taylor, M.J. Cordill, H.M. Zbib, J. Michler, D.F. Bahr

Abstract

Abstract Cu/Ni/Nb tri-layer and CuNi/Nb alloy multilayer films were annealed to examine the microstructural evolution and mechanical properties of three component laminated metallic nanostructures. Scanning transmission electron microscopy showed Ni x Nb y compounds forming on either side of the Nb layer in both tri-layer and alloy films. Post annealing nanoindentation showed all annealing conditions resulted in increased hardness, indicative of the Ni x Nb y intermetallic phase increasing the hardness of the films. The hardness of both films achieves a maximum hardness after annealing for 3 h at 300 °C. The hardness increase as the annealing temperature increases corresponds to a thicker Ni x Nb y layer at the incoherent boundary. This strengthening technique could be implemented in a variety of different multilayer systems to achieve age-hardenable multilayer metallic nanostructures.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Microstructure and mechanical properties · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. Characterization of Cu/Ni multilayer coatings by nanoindentation and atomic force microscopy10.1016/S0257-8972(02)00008-7 ↗
2. Strength and strain hardening behavior of Cu-based bilayers and trilayers10.1016/j.scriptamat.2010.12.009 ↗
3. Length-scale-dependent deformation mechanisms in incoherent metallic multilayered composites10.1016/j.actamat.2005.06.025 ↗
4. Size-dependent strength in nanolaminate metallic systems10.1557/jmr.2011.120 ↗
5. High-strength and thermally stable bulk nanolayered composites due to twin-induced interfaces10.1038/ncomms2651 ↗
6. Elevated temperature dependence of hardness in tri-metallic nano-scale metallic multilayer systems
7. N. Abdolrahim, Multiscale Modeling and Simulation of Deformation and Strength of Nanoscale Metallic Multilayer Systems, 2012.
8. Deformation mechanisms, size effects, and strain hardening in nanoscale metallic multilayers under nanoindentation10.1063/1.4748149 ↗
9. Stability in thin film multilayers and microlaminates: the role of free energy, structure, and orientation at interfaces and grain boundaries10.1016/S1359-6462(02)00629-2 ↗
10. Impacts of accelerated aging on the mechanical properties of Cu–Nb nanolaminates10.1007/s10853-012-6649-y ↗
11. Thermal stability of Cu–Nb nanolamellar composites fabricated via accumulative roll bonding10.1080/14786435.2012.731527 ↗
12. Thermal stability of self-supported nanolayered Cu/Nb films10.1080/14786430310001659480 ↗
13. Thermal stability of a Cu/Ta multilayer: an intriguing interfacial reaction10.1016/S1359-6454(99)00257-8 ↗
14. High-temperature mechanical behavior/microstructure correlation of Cu/Nb nanoscale multilayers10.1016/j.msea.2007.08.089 ↗
15. The effects of decreasing layer thickness on the high temperature mechanical behavior of Cu/Nb nanoscale multilayers10.1016/j.tsf.2006.01.036 ↗
16. Effects of elevated temperature annealing on the structure and hardness of copper/niobium nanolayered films10.1557/JMR.2005.0250 ↗
17. Intermetallic phase formation during annealing of Al/Ni multilayers10.1063/1.357893 ↗
18. Residual stress within nanoscale metallic multilayer systems during thermal cycling10.1016/j.msea.2015.09.082 ↗
19. Interface sharpening and broadening during annealing of Cu/Ni multilayers: a kinetic Monte Carlo study10.1103/PhysRevB.73.085403 ↗
20. Diffusion and Growth of the u Phase (Ni6Nb7) in the NI-Nb System10.1007/s11661-011-0715-y ↗
21. Multiphase diffusion in the Co-Nb and Ni-Nb systems: Part I. Solid-solid phase equilibria and growth of intermetallic phases*10.1016/0966-9795(94)90007-8 ↗
22. Nucleation and growth during reactions in multilayer Al/Ni films: the early stage of Al3Ni formation10.1063/1.348722 ↗
23. Interfacial reactions on annealing Cu/Al multilayer thin films10.1063/1.355183 ↗
24. Elastic properties of reinforced solids: some theoretical principles10.1016/0022-5096(63)90036-X ↗
25. Anisotropic effects in elastic and incipient plastic deformation under (001), (110), and (111) nanoindentation of Al and Cu10.1103/PhysRevB.75.035415 ↗
26. Strain hardening and large tensile elongation in ultrahigh-strength nano-twinned copper10.1063/1.1814431 ↗
27. Nanoscale-twinning-induced strengthening in austenitic stainless steel thin films10.1063/1.1647690 ↗
28. Thermal stability of sputtered Cu films with nanoscale growth twins10.1063/1.2913322 ↗
29. Structure and mechanical properties of Cu-X (X, Nb, Cr, Ni) nanolayered composites10.1016/S1359-6462(98)00196-1 ↗
30. Formation, solid solution hardening and softening of nanocrystalline solid solutions prepared by mechanical attrition10.1016/1359-6454(95)00178-6 ↗
31. Diffusion of Cu and Cu alloys
32. Grain boundary diffusion and segregation of Ni in Cu10.1016/j.actamat.2007.01.032 ↗
33. Ohring · 2001
34. Tabor · 2000
35. Precipitation hardening10.1007/BF02670416 ↗