Mechanism of boundary induced transformation and its application in the grain refinement of large-size structural steels
Source abstract
Abstract
Abstract The conventional thermal-mechanical control processing technology governed by a heavy reduction at a relatively lower temperature has been applied successfully in the refinement of the final microstructure of hot-rolled steels. However, it might not be the best method for the manufacture of large-size structural steels due to their limited reduction ratio and relatively high temperature during hot rolling. Boundary induced transformation (BIT), is proposed in the present paper as an alternative approach for the grain refinement of large-size structural steels. The austenite grain size during reheating and rough rolling is controlled by Ti microalloying with the aim of reducing the critical strain for the onset of dynamic recrystallization (DRX) in the subsequent rolling. The precipitation of NbC particles and their inhibition of static recrystallization during the interpass interval is responsible for the accumulation of strain to ensure the occurrence of DRX in finish rolling. Consequently, the large amount of austenite grain boundaries resulted from the formation of fine DRXed grains will provide potent nucleation sites for the phase transformation from austenite to ferrite and then lead to an effective grain refinement. The experimental results demonstrate that the ferrite grain size can be significantly refined via this approach, illustrating that BIT mechanism is very applicable to refine grain size effectively for the large-size structural steels with limited reduction ratio.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. A novel process to obtain lamella structured low-carbon steel with bimodal grain size distribution for potentially improving mechanical property10.1016/j.msea.2020.139339 ↗
2. Nanostructuring of metals by severe plastic deformation for advanced properties10.1038/nmat1180 ↗
3. Exploring performance limits of a new martensitic high strength steel by ausforming via equal channel angular pressing10.1016/j.scriptamat.2020.03.011 ↗
4. Optimization of TMCP strategy for microstructure refinement and flow-productivity characteristics enhancement of low carbon steel10.1016/j.jmrt.2019.04.021 ↗
5. Thermo-mechanical processing route to achieve ultrafine grains in low carbon microalloyed steels10.1016/j.actamat.2016.08.010 ↗
6. Thermo-mechanically controlled processed ultrahigh strength steel: microstructure, texture and mechanical properties10.1016/j.msea.2016.03.127 ↗
7. Ultrafine grained structure formation in steels using dynamic strain induced transformation processing10.1179/174328006X102538 ↗
8. Analysis and characterisation of ultra-fine ferrite produced during a new steel strip rolling process10.1016/S1359-6462(98)00442-4 ↗
9. Effect of deformation parameters on microstructure and properties during DIFT of X70HD pipeline steel10.1007/s11665-017-3116-6 ↗
10. In situ observation of γ→α transformation during hot deformation in an Fe-Ni alloy by an X-ray diffraction method10.1016/S1359-6462(98)00239-5 ↗
11. Occurrence of dynamic ferrite transformation in low-carbon steel above Ae310.1016/j.scriptamat.2012.12.010 ↗
12. Effect of strain path on dynamic strain-induced transformation in a microalloyed steel10.1016/j.actamat.2013.11.062 ↗
13. Integrated production technologies for ultra-fine grained steel sheets10.2355/isijinternational.48.1133 ↗
14. Development of thermo-mechanical control process (TMCP) and high performance steel in JFE Steel
15. Development of a new generation TMCP technology
16. Dynamic recrystallization—scientific curiosity or industrial tool?10.1016/0921-5093(94)91028-6 ↗
17. Comparison of dynamic recrystallization and conventional controlled rolling schedules by laboratory simulation10.2355/isijinternational.31.278 ↗
18. Thermal mechanisms of grain refinement in steels: a review
19. Sellars · 1985 · 142
20. The metadynamic recrystallisation of steels, THERMEC’97, international conference on thermo-mechanical processing of steels and other materials
21. Modelling microstructure and its effects during multipass hot rolling10.2355/isijinternational.32.359 ↗
22. The effect of vanadium micro-alloying on the microstructure and the tensile behavior of TWIP steel10.1016/j.msea.2017.04.083 ↗
23. Effects of Nb and C additions on the microstructure and tensile properties of lightweight ferritic Fe-8Al-5Mn alloy10.1016/j.scriptamat.2014.06.018 ↗
24. TiC precipitation induced effect on microstructure and mechanical properties in low carbon medium manganese steel10.1016/j.msea.2011.10.037 ↗
25. Effect of solid solution elements on solubility products of carbides and nitrides in austenite: thermodynamic calculations10.1007/s11661-019-05295-w ↗
26. Strain-induced precipitation of NbC in Nb and Nb-Ti microalloyed HSLA steels10.1016/S1359-6462(01)01214-3 ↗
27. Interactions between recrystallization and precipitation in hot-deformed microalloyed steels10.1016/0956-7151(91)90121-G ↗
28. Effect of distribution of Ti nitride precipitate particles on the austenite grain size of low carbon and low alloy steel10.2355/isijinternational1966.18.198 ↗
29. Study on the precipitation behavior of TiN in the microalloyed steels
30. Control of ultra-fine grain in high grade pipeline steels
31. Physical chemistry of the groups IVa (Ti, Zr), Va (V, Nb, Ta) and the rare earth elements in steel10.2355/isijinternational1966.15.145 ↗
32. The evolutions of microstructure and mechanical properties of 2.25Cr-1Mo-0.25V steel with different initial microstructures during tempering10.1016/j.msea.2017.05.095 ↗
33. Combined effect of Nb and Ti on the recrystallisation behaviour of some HSLA steels
34. Recrystallization behavior design for controlling grain size in strip rolling process10.1016/S1006-706X(08)60009-6 ↗
35. Ultra-fine grain size control and mixed grains elimination in industrial multi-pass rolling processing10.1016/j.msea.2006.04.006 ↗