journal article·2021-02

Data rich imaging approaches assessing fatigue crack initiation and early propagation in a DS superalloy at room temperature

Y.G. Tan, D.J. Bull, R. Jiang, A. Evangelou, S. Chaudhuri, S. Octaviani, F. Pierron, N. Gao, H. Toda, I. Sinclair, P.A.S. Reed

Publisher page

Abstract

Abstract Crack initiation and early propagation behavior of the directionally solidified (DS) superalloy CM247LC has been assessed by data rich imaging approaches. These include conventional characterization methods such as replica record analysis, 3D optical surface imaging, optical and scanning electron microscopy (SEM) as well as more recent techniques like digital image correlation (DIC) and synchrotron radiation computed tomography (SRCT). Three modes of secondary crack behaviors were found during evaluation of the fatigue process. The early stages of fatigue damage were controlled by microstructure-induced cracking, mainly consisting of carbide cracking. Fatigue damage was then promoted via slip band cracking and opening mode controlled carbide-cracking. The mechanisms of these different cracking behaviors are associated with the plastic zone of the main crack tip. Even though the early localized strain levels were of the same intensity within slip bands and at the intersection sites with carbides, carbide-induced cracking occurred prior to slip band cracking, characterized by SEM-DIC. This indicated that carbide-induced cracking was more likely to occur in the early stages of the fatigue process. Early crack growth behaviors were further investigated in situ at the microstructural scale via SRCT. The effect of carbides on crack initiation and propagation processes were evaluated in 3D. This revealed the phenomenon around pores, that cracks simultaneously grew on different slip planes in 3D, contrary to previous theories that such cracks tend to grow on a single favourable slip plane (in polycrystalline alloys). The SRCT result demonstrates the importance and necessity of 3D characterization of the crack propagation behavior at sub-surface, which is not fully analyzed by 2D characterization.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Temperature Alloys and Creep · Additive Manufacturing Materials and Processes · Nuclear Materials and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (48)

Show source-provided references
1. Erickson · 1985
2. High temperature fatigue in single crystal superalloys10.1111/j.1460-2695.1997.tb00307.x ↗
3. High temperature fatigue of nickel-base superalloys – a review with special emphasis on deformation modes and oxidation10.1016/j.engfailanal.2009.01.010 ↗
4. The effect of creep and oxidation on high-temperature fatigue crack propagation in ⟨001⟩-loaded CMSX-2 superalloy single crystals10.1016/0921-5093(95)09794-5 ↗
5. Initiation and growth of small fatigue cracks in a Ni-base superalloy10.1007/BF02670678 ↗
6. The effect of temperature on the behaviour of short fatigue cracks in Waspaloy using an in situ SEM fatigue apparatus10.1016/0142-1123(93)90376-2 ↗
7. Characterisation of strain localisation processes during fatigue crack initiation and early crack propagation by SEM-DIC in an advanced disc alloy10.1016/j.msea.2017.05.091 ↗
8. On the numerical modeling of nucleation and growth of microstructurally short cracks in polycrystals under cyclic loading10.1557/jmr.2019.270 ↗
9. Simulations of dislocation density in silicon carbide crystals grown by the PVT-method10.1016/j.jcrysgro.2019.125380 ↗
10. The effect of microstructure on 650 °C fatigue crack growth in P/M astrology10.1007/BF02663305 ↗
11. Effect of hot cracking on the mechanical properties of Hastelloy X superalloy fabricated by laser powder bed fusion additive manufacturing10.1016/j.optlastec.2019.105984 ↗
12. Role of secondary phase particles in fatigue behavior of high-speed railway gearbox material10.1016/j.ijfatigue.2019.105336 ↗
13. Short fatigue crack behaviour of LZ50 railway axle steel under multi-axial loading in low-cycle fatigue10.1016/j.ijfatigue.2019.105366 ↗
14. Microstructure and mechanical properties of a high-Zn aluminum alloy prepared by melt spinning and extrusion10.1016/j.jallcom.2019.152990 ↗
15. Effects of microstructure on room temperature fatigue crack initiation and short crack propagation in Udimet 720Li Ni-base superalloy10.1016/j.ijfatigue.2008.01.001 ↗
16. Effect of porosity and eutectics on the high-temperature low-cycle fatigue performance of a nickel-base single-crystal superalloy10.1016/j.scriptamat.2018.06.036 ↗
17. Crack formation and microstructure-sensitive propagation in low cycle fatigue of a polycrystalline nickel-based superalloy with different heat treatments10.1016/j.ijfatigue.2017.10.012 ↗
18. Compatibility stresses in fatigued bicrystals: dependence on misorientation and small plastic deformations10.1016/S1359-6454(97)00184-5 ↗
19. Inclusion size effect ON the fatigue crack-propagation mechanism and fracture-mechanics OF a superalloy10.1007/BF02801169 ↗
20. Microstructural features controlling the variability in low-cycle fatigue properties of alloy inconel 718DA at intermediate temperature10.1007/s11661-015-3291-8 ↗
21. High resolution mapping of strain localization near twin boundaries in a nickel-based superalloy10.1016/j.actamat.2015.07.016 ↗
22. Influence of pores on crack initiation in monotonic tensile and cyclic loadings in lost foam casting A319 alloy by using 3D in-situ analysis10.1016/j.msea.2016.07.036 ↗
23. Strain accumulation and fatigue crack initiation at pores and carbides in a SX superalloy at room temperature10.1016/j.ijfatigue.2018.05.003 ↗
24. Harris · 1984 · 221
25. Creep fatigue of a directionally solidified Ni‐base superalloy–smooth and cylindrically notched specimens10.1111/j.1460-2695.2010.01487.x ↗
26. Role of shrinkage pores, carbides on cyclic deformation behaviour of conventionally cast nickel base superalloy CM247LC® at 870°C10.1016/j.msea.2015.12.054 ↗
27. Slip transfer and plastic strain accumulation across grain boundaries in Hastelloy X10.1016/j.jmps.2012.02.001 ↗
28. Plastic strain mapping with sub-micron resolution using digital image correlation10.1007/s11340-012-9685-2 ↗
29. A novel approach for the determination of surface tilt angles in two-dimensional digital image correlation experiments10.1007/s11340-019-00554-8 ↗
30. Texier · 2020 · 629
31. Ductile crack initiation and propagation assessed via in situ synchrotron radiation-computed laminography10.1016/j.scriptamat.2011.09.005 ↗
32. Quantitative X-ray tomography10.1179/1743280413Y.0000000023 ↗
33. Effects of microstructures on fatigue crack initiation and short crack propagation at room temperature in an advanced disc superalloy10.1016/j.msea.2015.05.065 ↗
34. Synchrotron-based holotomography and X-ray fluorescence study on the stress corrosion cracking behavior of the peak-aged 7075 aluminum alloy10.1016/j.jallcom.2019.152722 ↗
35. Three-dimensional assessment of low velocity impact damage in particle toughened composite laminates using micro-focus X-ray computed tomography and synchrotron radiation laminography10.1016/j.compositesa.2013.05.003 ↗
36. Effects of oxygen-related damage on dwell-fatigue crack propagation in a P/M Ni-based superalloy: from 2D to 3D assessment10.1016/j.ijfatigue.2017.03.003 ↗
37. Assessment of predominant microstructural features controlling 3D short crack growth behavior via a surrogate approach in Ti-6Al-4V10.1016/j.msea.2019.01.116 ↗
38. Systematic errors in digital image correlation due to undermatched subset shape functions10.1007/BF02410987 ↗
39. Measurement accuracy in X-ray computed tomography metrology: toward a systematic analysis of interference effects in tomographic imaging10.1016/j.precisioneng.2015.12.003 ↗
40. Short crack propagation from cracked non-metallic inclusions in a Ni-based polycrystalline superalloy10.1016/j.actamat.2018.11.051 ↗
41. Competing mechanisms of particle fracture, decohesion and slip-driven fatigue crack nucleation in a PM nickel superalloy10.1016/j.ijfatigue.2020.105573 ↗
42. Grain boundary-slip bands interactions: impact on the fatigue crack initiation in a polycrystalline forged Ni-based superalloy10.1016/j.actamat.2015.08.009 ↗
43. Precipitation behavior of Fe2Nb Laves phase on grain boundaries in austenitic heat resistant steels10.1016/j.msea.2014.07.104 ↗
44. Planar slip-driven fatigue crack initiation and propagation in an equiatomic CrMnFeCoNi high-entropy alloy10.1016/j.ijfatigue.2019.105418 ↗
45. A critical of carbide cracking mechanisms in ferride/carbide aggregates10.1016/0001-6160(70)90103-3 ↗
46. The strengthening of metals by dispersed particles
47. Overview No. 1: the nucleation of cavities by plastic deformation10.1016/0001-6160(79)90051-8 ↗
48. Short crack growth behavior and its transitional interaction with 3D microstructure in Ti-6Al-4V10.1016/j.msea.2018.09.073 ↗