journal article·2021-01

High temperature indentation creep mechanisms of metal-ceramic nanolaminates

Yunsheng Chen, Jun Wang, Yajie Feng, Gang Zhao, Xigao Jian, Lingwei Yang, Jian Xu

Publisher page

Abstract

Abstract Creep, as one of the mechanical properties for evaluating the resistance of deformation under a persistent stress, is extremely important in the application of metal/ceramic nanolaminates. In this work, the creep behaviors of Al/SiC nanolaminates with layer thickness of 10 nm and 100 nm were studied by means of nanoindentation in the temperature range from 25 °C to 150 °C. It was found that the stress exponent of nanolaminates for layer thickness of 100 nm increased with an increase in temperature. The stress exponent of Al was obtained by inverse methodology based on the finite element simulations, indicating that the creep mechanism changed from dislocation-grain boundary interaction to Coble creep. In the contrary, nanolaminates with layer thickness of 10 nm exhibited temperature-independent creep behaviors. This was rationalized by the co-deformation of Al and SiC layers beneath the indenter, which was dominated in the whole temperature range. In addition, all of these conclusions were further confirmed by the detailed transmission electron microscopic observation, the activation energy and the activation volume analysis.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Metal and Thin Film Mechanics · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (51)

Show source-provided references
1. Influence of titanium interlayer thickness distribution on mechanical properties of Ti/TiN multilayer coatings10.1016/j.tsf.2017.04.026 ↗
2. Effect of volume fraction on mechanical properties of Zr/ZrN multilayer systems10.1016/j.ceramint.2016.09.025 ↗
3. Deformation mechanisms of ultra-thin Al layers in Al/SiC nanolaminates as a function of thickness and temperature10.1080/14786435.2016.1219075 ↗
4. Mechanical behavior of Cu/TiN multilayers at ambient and elevated temperatures: stress-assisted diffusion of Cu10.1016/j.msea.2014.10.023 ↗
5. Interface-driven plasticity in metal–ceramic nanolayered composites: direct validation of multiscale deformation modeling via in-situ indentation in TEM10.1007/s11837-015-1542-1 ↗
6. Delamination analysis of metal–ceramic multilayer coatings subject to nanoindentation10.1016/j.surfcoat.2016.01.038 ↗
7. Review: mechanical behavior of metal/ceramic interfaces in nanolayered composites—experiments and modeling10.1007/s10853-017-1767-1 ↗
8. Bifurcation in deformation mechanism to overcome strength-ductility paradox in metal-ceramic multilayer thin-films10.1063/1.5041344 ↗
9. A review on hybrid nanolaminate materials synthesized by deposition techniques for energy storage applications10.1039/C3TA14034B ↗
10. Al2O3-Y2O3 nanolaminated slab optical waveguides by atomic layer deposition10.1016/j.optmat.2020.109822 ↗
11. Granneman · Thin films in the integrated circuit industry: requirements and deposition methods · 1993 · 228 · 1
12. Qiu · 2011 · 1665
13. Time-, stress-, and temperature-dependent deformation in nanostructured copper: creep tests and simulations10.1016/j.jmps.2016.04.021 ↗
14. The microstructure length scale of strain rate sensitivity in ultrafine-grained aluminum10.1557/jmr.2015.58 ↗
15. Measurement of creep rate sensitivity of ultra-fine grained commercial purity titanium at room temperature by nanoindentation
16. Strain-rate dependent deformation mechanism of graphene-Al nanolaminated composites studied using micro-pillar compression10.1016/j.ijplas.2018.02.006 ↗
17. Enhanced strain rate sensitivity of Zr-based bulk metallic glasses subjected to high pressure torsion10.1016/j.jallcom.2018.03.018 ↗
18. Measurement of power-law creep parameters by instrumented indentation methods10.1016/j.jmps.2012.09.009 ↗
19. Analysis of indentation-derived power-law creep response10.1007/s11665-016-1934-6 ↗
20. A direct comparison of high temperature nanoindentation creep and uniaxial creep measurements for commercial purity aluminum10.1016/j.actamat.2016.03.032 ↗
21. Influence of temperature on the strain rate sensitivity and deformation mechanisms of nanotwinned Cu10.1016/j.scriptamat.2018.05.018 ↗
22. Indentation power-law creep of high-purity indium10.1007/s11661-999-0051-7 ↗
23. Size-dependent deformation mechanisms and strain-rate sensitivity in nanostructured Cu/X (X=Cr, Zr) multilayer films10.1016/j.actamat.2012.03.052 ↗
24. The microstructure and mechanical behavior of Mg/Ti multilayers as a function of individual layer thickness10.1016/j.actamat.2013.10.032 ↗
25. Strain rate sensitivity of Cu/Ta multilayered films: comparison between grain boundary and heterophase interface10.1016/j.scriptamat.2015.08.031 ↗
26. Nanoindentation investigation on creep behavior of amorphous Cu Zr Al/nanocrystalline Cu nanolaminates10.1016/j.jnoncrysol.2017.03.037 ↗
27. Indentation of a power law creeping solid
28. Strain rate sensitivity of Sn–3.0Ag–0.5Cu solder investigated by nanoindentation10.1016/j.msea.2014.06.113 ↗
29. A critical appraisal of the extraction of creep parameters from nanoindentation data obtained at room temperature10.1016/j.actamat.2006.07.020 ↗
30. Barry Neal · 1997
31. Dassault Systèmes · 2016
32. Mechanical properties of metal-ceramic nanolaminates: effect of constraint and temperature10.1016/j.actamat.2017.09.042 ↗
33. Characterization of nanoindentation damage in metal/ceramic multilayered films by transmission electron microscopy (TEM)10.1016/j.msea.2010.01.040 ↗
34. Creep in nanocrystalline materials: role of stress assisted grain growth10.1016/j.msea.2010.05.048 ↗
35. Handbook of SiC properties for fuel performance modeling10.1016/j.jnucmat.2007.05.016 ↗
36. A creep finite element analysis of indentation creep testing in two phase microstructures (particle/matrix- and thin film/substrate-systems)
37. Experimental and numerical study of the method to determine the creep parameters from the indentation creep testing
38. Indentation fracture response of Al–TiN nanolaminates10.1080/21663831.2013.783515 ↗
39. In situ nanoindentation study of plastic co-deformation in Al-TiN nanocomposites10.1038/srep06633 ↗
40. Deformation and fracture mechanics of engineering materials
41. Creep behavior of nanocrystalline Au films as a function of temperature10.1007/s10853-015-9687-4 ↗
42. Competing grain-boundary- and dislocation-mediated mechanisms in plastic strain recovery in nanocrystalline aluminum10.1073/pnas.0901765106 ↗
43. Hardness and strain rate sensitivity of nanocrystalline Cu10.1016/j.scriptamat.2006.02.022 ↗
44. Mechanistic models for the activation volume and rate sensitivity in metals with nanocrystalline grains and nano-scale twins10.1016/j.actamat.2005.03.047 ↗
45. A model for boundary diffusion controlled creep in polycrystalline materials10.1063/1.1702656 ↗
46. The high-temperature creep properties of materials processed using severe plastic deformation10.3139/146.110093 ↗
47. Deformation mechanism maps based on grain size10.1007/BF02644014 ↗
48. Activation volume and deviation from Cottrell–Stokes law at small grain size10.1016/j.ijplas.2009.10.003 ↗
49. Tabor · 2000
50. Temperature and strain rate sensitivity of ultrafine-grained copper under uniaxial compression10.1142/S1758825113500166 ↗
51. Mechanical properties of crystalline Cu/Zr and crystal–amorphous Cu/Cu–Zr multilayers10.1016/j.msea.2012.05.056 ↗