journal article·2020-10Open access

Microstructural evolution in Ti–10Al–1Zr–1Mo–1Nb alloy under thermomechanical treatment in β-region

Shintaro Tanii, Osamu Umezawa, Yoko Yamabe-Mitarai

Abstract

The influence of temperature and strain rate on microstructural evolution in near α-type Ti–10Al–1Zr–1Mo–1Nb alloy was studied under uniaxial compression in the β single-phase-region. Hot compression tests were conducted for up to 75% reduction at temperatures between 1273 K and 1333 K and strain rates between 0.01 s^−1 and 5 s^−1. The steady-state of the flow behavior revealed that dynamic recovery in the β single-phase was dominant in the microstructural evolution process, and few dynamically recrystallized grains were detected, except in the vicinity of the pre-existing β grain boundaries. Two types of configurations such as lamellar α_L and acicular α_AC microstructures were developed, which were consistent with the compressive deformation mechanism in the β-region. The α_L microstructure consisted of α platelets that were developed via growth of a specific variant, whereas the α_AC microstructure consisted of individual α platelets with a different variant in the prior-β matrix. The stress exponent and activation energy were evaluated to determine the deformation mechanism. The heterogeneous nucleation of individual α platelets in the cellular structure (sub-grains) without a specific orientation in the β matrix resulted in the αAC microstructure. In contrast, the substructure as uniformly distributed dislocations in prior-β grains under the viscous motion of dislocations promoted a single variant selection to form αL platelets in the transformation. When the viscous drag dislocation motion in the β-region is dominant, a large crystal rotation is detected in the acicular (side plate) α_SP platelets in the vicinity of the prior-β grain boundary.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Titanium Alloys Microstructure and Properties · Intermetallics and Advanced Alloy Properties · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. An overview on the use of titanium in the aerospace industry10.1016/0921-5093(96)10233-1 ↗
2. Diffusion of chromium in α-titanium and its alloys10.2320/matertrans1989.31.249 ↗
3. Influence of processing on microstructure and mechanical properties of (α+β) titanium alloys10.1016/S0921-5093(97)00778-8 ↗
4. High-temperature titanium alloys - a review
5. Oxidation behavor of high-temperature Ti alloys
6. Effect of Zr on microstructure and oxidation behavior of α and α + α2 Ti-Al-Nb alloys10.2320/matertrans.MAW201603 ↗
7. Effects of Zr and Si addition on high-temperature mechanical properties and microstructure in Ti-10Al-2Nb-based alloys10.1016/j.msea.2019.04.031 ↗
8. Property optimization through microstructural control in titanium and aluminum alloys10.1016/S0921-5093(98)01169-1 ↗
9. Optimising mechanical properties in alpha+beta titanium alloys10.1016/S0921-5093(97)00784-3 ↗
10. Creep resistance of certain alloys of the Ti-Al-Zr-Mo-Si system10.1179/030716979803276651 ↗
11. On the effect of colony size on fatigue crack growth in Widmanstätten structure α+β titanium alloys10.1007/BF02811724 ↗
12. Influence of texture on fatigue properties of Ti-6Al-4V10.1007/BF02657799 ↗
13. Microstructure and fatigue crack growth mechanisms in high temperature titanium alloys10.1016/j.ijfatigue.2010.02.001 ↗
14. The Thermo-Calc database system, in computer software in chemical and extractive metallurgy
15. On the process of transition of the cubic-body-centered modification into the hexagonal-close-packed modification of zirconium10.1016/S0031-8914(34)80244-3 ↗
16. A nucleation criterion for dynamic recrystallization during hot working10.1016/0001-6160(78)90030-5 ↗
17. Thermomechanical processing of iron, titanium, and zirconium alloys in the bcc structure10.1007/BF02833686 ↗
18. High temperature dynamic yielding in metastable Ti-6.8Mo-4.5F-1.5Al10.1016/S0921-5093(97)00800-9 ↗
19. Recrystallization during thermomechanical processing of IMI83410.1007/s11661-008-9666-3 ↗
20. Frequent occurrence of discontinuous dynamic recrystallization in Ti-6Al-4V Alloy with α′ martensite starting microstructure10.1007/s11661-013-1655-5 ↗
21. Variant selection by dislocations during α precipitation in α/β titanium alloys10.1016/j.actamat.2014.12.044 ↗
22. Phase transformations during cooling in α+β titanium alloys10.1016/S0921-5093(97)00802-2 ↗
23. The effect of annealing temperatures and cooling rates on microstructure and mechanical properties of investment cast Ti-6Al-4V alloy10.1016/j.matdes.2004.10.017 ↗
24. Variant selection in heterogeneous nucleation on defects in diffusional phase transformation and precipitation10.1016/S0921-5093(00)01904-3 ↗
25. On the mechanism of hot deformation10.1016/0001-6160(66)90207-0 ↗
26. New method for determining sinh constitutive constants for high temperature deformation of 300 austenitic steels10.1016/0924-0136(92)90235-K ↗
27. Correlations for diffusion constants10.1016/0001-6160(80)90092-9 ↗
28. Hot working behavior of near-α alloy IMI83410.1016/j.msea.2004.12.005 ↗
29. The deformation of plastically non-homogeneous materials10.1080/14786437008238426 ↗