A quasi in-situ study on the deformation mechanism in a 2.2Cr heat resistant steel
Source abstract
Abstract
Abstract We elucidate here the micromechanism of deformation at elevated temperatures in a newly designed 2.2Cr–bainitic high strength and heat resistant steel using a quasi in–situ approach, which enabled us to describe the evolution of microstructure and corresponding mechanisms concerning plastic deformation at elevated temperatures. A new mechanism referred as dynamic precipitation (M7C3)−assisted continuous dynamic recrystallization process is proposed that illustrates the underlying reason for the ultrahigh strength (>400 MPa at 650 °C) of newly designed heat resistant steel. The study revealed the interactions between grain boundary sliding, dynamic recrystallization and shearing process, and the critical stress required for transition to corresponding deformation mechanisms are discussed quantitatively. It is proposed that the newly defined mechanism can enhance strain–hardening ability at high temperature, which is mainly attributed to dynamic precipitation at triple junctions of (sub)-grain boundaries. The study provides a new pathway to stretch the limits of high–temperature strength of heat–resistant steels.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. Some studies on P91 steel and their weldments10.1016/j.jallcom.2018.01.120 ↗
2. Damage mechanics-based creep model for 9-10%Cr ferritic steels10.1016/j.actamat.2010.12.015 ↗
3. The double-edge effect of second-phase particles on the recrystallization behaviour and associated mechanical properties of metallic materials10.1016/j.pmatsci.2017.10.004 ↗
4. Precipitates and particles coarsening of 9Cr-1.7W-0.4Mo-Co ferritic heat-resistant steel after isothermal aging
5. Deformation behavior of modified 9Cr-1Mo steel under low cycle fatigue at 600°C10.1016/j.matchar.2017.06.024 ↗
6. Effect of the strain rate on the low cycle fatigue behavior of a 10Cr-2W-Mo-3Co-NbV steel at 650 °C10.1016/j.ijfatigue.2017.03.025 ↗
7. On the 650°C thermostability of 9-12Cr heat resistant steels containing different precipitates10.1016/j.actamat.2017.05.069 ↗
8. Hosford · 2005
9. A first report on deformation mechanism10.1016/0001-6160(72)90082-X ↗
10. On grain boundary sliding and diffusional creep10.1007/BF02664244 ↗
11. Role of grain-boundary sliding in diffusional creep of polycrystals10.1063/1.367519 ↗
12. Bounds for shear viscosity in nabarro–herring–coble creep10.1016/j.mechmat.2019.103106 ↗
13. Ferritic alloys with extreme creep resistance via coherent hierarchical precipitates
14. Effects of prior microstructures and deformation parameters on the ultra-refining uniformity of Ti-Mo ferritic steel10.1016/j.msea.2018.07.006 ↗
15. Thermal-mechanical fatigue behavior and lifetime prediction of P92 steel with different phase angles10.1016/j.ijfatigue.2017.12.021 ↗
16. Numerical and experimental investigation of low cycle fatigue behaviour in P91 steel10.1016/j.engfailanal.2017.05.001 ↗
17. Variant selection of lath martensite and bainite transformation in low carbon steel by ausforming10.1016/j.jallcom.2011.12.111 ↗
18. Influence of ferrite matrix and precipitation status on the mechanical properties of low carbon low alloy steel during high temperature tension10.1016/j.msea.2016.09.058 ↗
19. Nanoscale cementite precipitates and comprehensive strengthening mechanism of steel10.1007/s11661-011-0767-z ↗
20. Slip transfer across grain/twin boundaries in polycrystalline Ni-based superalloys10.1016/j.msea.2017.06.072 ↗
21. Transgranular dislocation activities and substructural evolutions accommodating two-dimensional grain boundary sliding in ODS ferritic steel10.1016/j.actamat.2017.04.047 ↗
22. Whisker and hillock growth via coupled localized Coble creep, grain boundary sliding, and shear induced grain boundary migration10.1016/j.actamat.2012.12.019 ↗
23. Dynamic and post-dynamic recrystallization under hot, cold and severe plastic deformation conditions10.1016/j.pmatsci.2013.09.002 ↗
24. Nucleation of cavities at second phase particles in grain boundaries10.1016/0001-6160(78)90050-0 ↗
25. Grain boundary oxidation in iron-based alloys, investigated by 18O enriched water vapour-The effect of mixed oxides in binary and ternary Fe-{Al, Cr, Mn, Si} systems10.1016/j.corsci.2015.04.009 ↗
26. Nanoscale cementite precipitates and comprehensive strengthening mechanism of steel10.1007/s11661-011-0767-z ↗
27. Continuous dynamic recrystallization in low density steel10.1016/j.matdes.2016.10.044 ↗
28. Lejcek · 2010
29. Kinetics of strain-induced transformation of dispersed austenite in low-alloy TRIP steels10.1016/j.msea.2014.07.099 ↗
30. Thermal stability and grain boundary strengthening in ultrafine-grained CoCrFeNi high entropy alloy composite10.1016/j.matdes.2017.08.053 ↗
31. Brian · 2010